Subject: Re: Sun 4c netboot swap file errors
To: Kerry Gray <kgray@netcom.com>
From: David Brownlee <david@mono.org>
List: port-sparc
Date: 05/24/1996 19:22:28
	Is /usr/sparc is root of that filesystem?
	If not try exporting the fs root (/usr?) with -alldirs.

On Fri, 24 May 1996, Kerry Gray wrote:

> 
> 
> On Fri, 24 May 1996, David Brownlee wrote:
> 
> > 	Does adding '-alldirs' to the /etc/exports line help?
> > 
> Adding -alldirs changes the error from 72 on the swap file to 13 on the 
> kernel file, viz., adding -alldirs actually makes it worse.
> > 
> > 
> > On Wed, 22 May 1996, Kerry Gray wrote:
> > 
> > > 
> > > I am unable to get my SS1 to boot off the net from my pc with NetBSD 
> > > 1.1.  It seems that no matter what I try I get error 72 from mountd when 
> > > the kernel tries to mount the swap file.  I can only assume that there is 
> > > some error on my part with the configuration, since I don't see anyone 
> > > else complaining about it.
> > > 
> > > Here are my config files for the sparc ("sparcomatic") and the boot 
> > > server ("boot9"):
> > > 
> > > boot9's /etc/exports:
> > > 
> > > /usr/sparc -maproot=root sparcomatic
> > > 
> > > boot9's /etc/bootparams:
> > > 
> > > sparcomatic	root=boot9:/usr/sparc \
> > > 		swap=boot9:/usr/sparc/swapfile
> > > 
> > > boot9's and sparcomatic's /etc/hosts:
> > > 
> > > #
> > > 127.1		localhost localhost.hartnell.cc.ca.us
> > > #
> > > # Non-Imaginary network.
> > > 198.94.9.200	boot9 boot9.hartnell.cc.ca.us
> > > 198.94.9.201	sparcomatic sparcomatic.hartnell.cc.ca.us
> > > 198.94.9.253	jafar jafar.hartnell.cc.ca.us
> > > 198.94.11.253	einstein einstein.hartnell.cc.ca.us
> > > 198.94.9.240	doc doc.hartnell.cc.ca.us
> > > 
> > > I don't think it gets this far, but here is the sparc's /etc/fstab:
> > > 
> > > # experimental fstab for sparc kg
> > > boot9:/usr/sparc / nfs rw 0 0
> > > boot9:/usr/sparc/swapfile none swap rw 0 0
> > > # boot9:/usr/sparc/swapfile none nfs rw 0 0
> > > 
> > > 
> > > 
> > > The swap file was created by dd inside the root directory of the sparc, 
> > > namely /usr/sparc on the server.  I have tried other places, too, but 
> > > they all result in the same error 72.
> > > 
> > > Any suggestions would be appreciated.
> > > 
> > 
> > 
>