On Mon, 23 Oct 95 17:27:36 EDT 
 Tom Calderwood <tcalderw@BBN.COM> wrote:

Is /dev empty?

 > My Sparc 1+ running -current is hanging during boot:
 > 
 > timer0 at mainbus0 ioaddr 0xf3000000
 > auxreg0 at mainbus0 ioaddr 0xf7400003
 > zs0 at mainbus0 ioaddr 0xf1000000 pri 12, softpri 6
 > zs0a: console i/o
 > zs1 at mainbus0 ioaddr 0xf0000000 pri 12, softpri 6
 > audio0 at mainbus0 ioaddr 0xf7201000 pri 13, softpri 4
 > sbus0 at mainbus0 ioaddr 0xf8000000: clock = 20 MHz
 > dma0 at sbus0 slot 0 offset 0x400000: rev 1+
 > esp0 at sbus0 slot 0 offset 0x800000 pri 3: ESP100 20Mhz, target 7
 > scsibus0 at esp0
 > esp0 targ 3 lun 0: <SEAGATE, ST1480   SUN0424, 7516> SCSI2 0/direct fixed
 > sd0 at scsibus0: 411MB, 1476 cyl, 9 head, 63 sec, 512 bytes/sec
 > le0 at sbus0 slot 0 offset 0xc00000 pri 5: hardware address 08:00:20:0c:7d:b0
 > le1 at sbus0 slot 2 offset 0xc00000 pri 5: hardware address 08:00:20:0c:7d:b0
 > cgsix0 at sbus0 slot 3 offset 0x0: SUNW,501-1672, 1152 x 900, rev 6
 > 
 > At this point the keyboard lights flash, and nothing more happens.  I
 > feel like I've seen this before on my IPX, but I can't remember what
 > the problem is.

--------------------------------------------------------------------------
Jason R. Thorpe                                       thorpej@nas.nasa.gov
NASA Ames Research Center                               Home: 408.866.1912
NAS: M/S 258-6                                          Work: 415.604.0935
Moffett Field, CA 94035                                Pager: 415.428.6939