> 
> In case anyone's interested, I just got X to run on my 4/260 ... sort 
> of.
> 
> Upon first moving the mouse, I got a fifo overrun on zs1b, and the mouse 
> didn't want to move after that.  Not sure what it might be at the moment 
> ... I'm going to compare the Sun 3 zs driver with the Sparc's.
> 
> However, it's worth noting that it got the screen size correct (I have a 
> 1600x1280 on my 4/260) and popped up my clock, calendar, etc.  (Window 
> manager never made it ... *shrug*)
> 
> I'll send my diffs to bwtwo.c shortly, though it's worth noting that 
> screenblank(1) still doesn't work with it (go figure ... works on my 3/60 
> and my SPARCstations at work...)  Guess I'll have to dig a bit further.
> 
> Ciao.
> 

Now that you mention screen size...

Is there any way to have a Sparc IPC (24Meg) to have a screen size >
1152 x 900

Do I have more than one piece of video hardware ?

(from dmesg) cgthree0 at sbus0 slot 2 offset 0x0: SUNW,501-1718, 1152 x
900 (console) bwtwo0 at sbus0 slot 3 offset 0x0: SUNW,501-1561, 1152 x
900

I remember something about setting screen sizes with the eeprom utility
from SunOS but I actually never managed to make that work. How do *you*
specify screen sizes?


$ dmesg
...
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California.  All rights reserved.

NetBSD 1.0A (NETBSD-SUN) #0: Fri Aug 11 22:16:32 MET DST 1995
    root@netbsd-brew.cisco.com:/usr/local/current/src/sys/arch/sparc/compile/NETBSD-SUN
real mem = 25112576
avail mem = 22294528
using 306 buffers containing 1253376 bytes of memory
mainbus0 (root)
cpu0 at mainbus0: Sun 4/40 (MB86900/1A or L64801 @ 25 MHz, WTL3170/2 FPU)
cpu0: 65536 byte write-through, 16 bytes/line, sw flush cache enabled
memreg0 at mainbus0 ioaddr 0xf4000000
clock0 at mainbus0 ioaddr 0xf2000000: mk48t02 (eeprom)
timer0 at mainbus0 ioaddr 0xf3000000
auxreg0 at mainbus0 ioaddr 0xf7400000
zs0 at mainbus0 ioaddr 0xf1000000 pri 12, softpri 6
zs1 at mainbus0 ioaddr 0xf0000000 pri 12, softpri 6
fd at mainbus0 ioaddr 0xf7200000 not configured
audio0 at mainbus0 ioaddr 0xf7201000 pri 13, softpri 4
sbus0 at mainbus0 ioaddr 0xf8000000: clock = 25 MHz
dma0 at sbus0 slot 0 offset 0x400000: rev 1
esp0 at sbus0 slot 0 offset 0x800000 pri 3: ESP100 25Mhz, target 7
scsibus0 at esp0
esp0 targ 3 lun 0: <MAXTOR, LXT-213S SUN0207, 4.24> SCSI1 0/direct fixed
sd0 at scsibus0: 202MB, 1310 cyl, 7 head, 45 sec, 512 bytes/sec
esp0 targ 4 lun 0: <SEAGATE, ST1480   SUN0424, 6266> SCSI2 0/direct fixed
sd1 at scsibus0: 411MB, 1476 cyl, 9 head, 63 sec, 512 bytes/sec
le0 at sbus0 slot 0 offset 0xc00000 pri 5: hardware address 08:00:20:0a:0a:fc
cgthree0 at sbus0 slot 2 offset 0x0: SUNW,501-1718, 1152 x 900 (console)
bwtwo0 at sbus0 slot 3 offset 0x0: SUNW,501-1561, 1152 x 900
...

Thanks for *any* info

--
 marc@offline.be    [=me@home]
 mduponch@cisco.com [=me@work]