--r5Pyd7+fXNt84Ff3
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable

So I thought I'd test out NetBSD on my R10k O2 again.

Unfortunately, it crashes on boot after the install.

Process:
 1) download and gunzip netbsd-INSTALL32_IP3x.gz[1] to /tftpboot
    on the dhcpd server
 2) enable tftpd in inetd, add the following to /etc/dhcpd.conf
    and restart inetd and dhcpd
        host neptune {
                hardware ethernet 08:00:69:0c:2b:78;
                fixed-address neptune.dsrw.org;
        }

 3) netboot the install kernel, run sysinst, install HEAD from
    the 20070411 daily build.
 4) reboot, set the following in the prom, (as per INSTALL.html)
       >> setenv systempartition scsi(0)disk(2)rdisk(0)partition(8)
       >> setenv osloadpartition scsi(0)disk(2)rdisk(0)partition(0)
       >> setenv osloadfilename netbsd
       >> setenv osloader boot=20
    I skipped this one:
       >> setenv osloadoptions auto=20
 5) enter 'boot' in the prom

and the output:

> boot
45536+1376 entry: 0x80002000

NetBSD/sgimips 4.99.17 Bootstrap, Revision 1.2
(builds@wb25, Wed Apr 11 22:03:26 PDT 2007)

devopen: pci(0)scsi(0)disk(2)rdisk(0)partition(0) type scsi file
netbsd
3436464+201604 [120240+107753]=3D0x3b019c
[ Kernel symbol table missing! ]
panic: can't handle primary cache on impl 0x9

Exception: <vector=3DNormal>
Status register: 0x20000002<CU1,IPL=3D8,MODE=3DKERNEL>
Cause register: 0x8024<CE=3D0,IP8,EXC=3DBREAK>
Exception PC: 0x882d5d00, Exception RA: 0x882528fc
Breakpoint exception at address 0x11111111
  Saved user regs in hex (&gpda 0x810617b8, &_regs 0x810619b8):
  arg: 81070000 6b8 0 1
  tmp: 81070000 100 883d0000 883a0000 1400 10000 8 883d0000
  sve: 81070000 4015fa0c 0 4618fbd8 0 4047cfc7 0 3ebf5e51
  t8 81070000 t9 0 at 0 v0 402003f7 v1 0 k1 1
  gp 81070000 fp 0 sp 0 ra 0

PANIC: Unexpected exception

[Press reset or ENTER to restart.]


[reboot]
Cannot connect to keyboard -- check the cable.
Cannot open keyboard() for input
Cannot connect to keyboard -- check the cable.
Cannot open keyboard() for input



                         Running power-on diagnostics...



System Maintenance Menu

1) Start System
2) Install System Software
3) Run Diagnostics
4) Recover System
5) Enter Command Monitor

Option? 5
Command Monitor.  Type "exit" to return to the menu.
> hinv
                   System: IP32
                Processor: 174 Mhz R10000, with FPU
     Primary I-cache size: 32 Kbytes
     Primary D-cache size: 32 Kbytes
     Secondary cache size: 1024 Kbytes
              Memory size: 256 Mbytes
                 Graphics: CRM, Rev C
                    Audio: A3 version 1
                SCSI Disk: scsi(0)disk(2)
               SCSI CDROM: scsi(0)cdrom(4)
> printenv
AutoLoad=3DYes
console=3Dg
diskless=3D0
dbaud=3D9600
volume=3D80
sgilogo=3Dy
monitor=3Dh
crt_option=3D1
SystemPartition=3Dpci(0)scsi(0)disk(2)rdisk(0)partition(8)
OSLoadPartition=3Dpci(0)scsi(0)disk(2)rdisk(0)partition(0)
OSLoader=3Dboot
OSLoadFilename=3Dnetbsd
netaddr=3D172.20.4.15
TimeZone=3DCST6CDT
cpufreq=3D174
eaddr=3D08:00:69:0c:2b:78
NoAutoLoad=3DCONSOLE OPEN FAILED.
ConsoleOut=3Dserial(0)
ConsoleIn=3Dserial(0)
videostatus=3Dillegal_env_var
>=20


any ideas?
thanks,
  --david





1. ftp://ftp.netbsd.org/pub/NetBSD-daily/HEAD/200704110002Z/sgimips/binary/=
kernel/netbsd-INSTALL32_IP3x.gz


--r5Pyd7+fXNt84Ff3
Content-Type: application/pgp-signature
Content-Disposition: inline

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (NetBSD)

iD8DBQFGIWgxHDmo5jqnP4QRAtKhAJ9HMsBPBZqPPuXAw43pgCoqsZAq4wCeI1A0
oruR+K6xAthRR3PdvXpeJVs=
=euXf
-----END PGP SIGNATURE-----

--r5Pyd7+fXNt84Ff3--