--FL5UXtIhxfXey3p5
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline

Hi there, I've just been having a play with my indy, and attempting to
get X working. Inspired by
http://mail-index.netbsd.org/port-sgimips/2004/03/09/0000.html, I
downloaded the server and set to work. Unfourtunately, the server seems
to assume the presence of a pci bus, which I don't seem to have on my
indy. Perhaps I can't see the wood for the trees, but could someone
point me in the correct direction? Cheers.

Running the Xserver results in the following:

XFree86 Version 4.4.0
Release Date: 29 February 2004
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: NetBSD/sgimips 1.6ZK [ELF] The NetBSD Foundation, Inc.
Current Operating System: NetBSD bast.necrofish.org.uk 1.6ZK NetBSD 1.6ZK (BAST) #0: Tue Apr 27 20:52:27 BST 2004  cez@mandelbrot.house:/disk/0/home/cez/src/indy-syssrc/arch/sgimips/compile/BAST sgimips
Build Date: 07 March 2004
Changelog Date: 29 February 2004
        Before reporting problems, check http://www.XFree86.Org/
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.", Time: Mon Jun 28 15:54:57 2004
xf86OpenConsole
netbsdPciInit: can't open /dev/pci0
List of video drivers:
        newport
No devices to configure.  Configuration failed.
-- 
Ceri Storey <cez@necrofish.org.uk>

--FL5UXtIhxfXey3p5
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename=bast-dmesg

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.6ZK (BAST) #0: Tue Apr 27 20:52:27 BST 2004
	cez@mandelbrot.house:/disk/0/home/cez/src/indy-syssrc/arch/sgimips/compile/BAST
65536 KB memory, 60796 KB free, 768 KB for ARCS
mainbus0 (root): SGI-IP22 [SGI, 6908596b], 1 processor
cpu0 at mainbus0: MIPS R4400 CPU (0x460) Rev. 6.0 with MIPS R4010 FPC Rev. 0.0
cpu0: 16KB/16B direct-mapped L1 Instruction cache, 48 TLB entries
cpu0: 16KB/16B direct-mapped write-back L1 Data cache
cpu0: 1024KB/128B direct-mapped write-back L2 Unified cache
ioc0 at mainbus0 addr 0x1fbd9800: rev 0, machine Indy (Guiness), board rev 0
int0 at mainbus0 addr 0x1fbd9880: bus 100MHz, CPU 200MHz
imc0 at mainbus0 addr 0x1fa00000: revision 3
gio0 at imc0
unknown GIO card (product 0x5c revision 0x00) at gio0 slot 1 addr 0x1f600000 not configured
newport0 at gio0 slot 2 addr 0x1f000000: SGI NG1 (board revision 7, cmap revision 5, xmap revision 5, vc2 revision 0), depth 8
wsdisplay0 at newport0 kbdmux 1: console (1280x1024, vt100 emulation)
wsmux1: connecting to wsdisplay0
hpc0 at gio0 addr 0x1fb80000: SGI HPC3
zsc0 at hpc0 offset 0x59830
zstty0 at zsc0 channel 1
zstty1 at zsc0 channel 0
pckbc0 at hpc0 offset 0x59840
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
sq0 at hpc0 offset 0x54000: SGI Seeq 80c03
sq0: Ethernet address 08:00:69:08:59:6b
wdsc0 at hpc0 offset 0x44000: WD33C93B SCSI, rev=0, target 0
scsibus0 at wdsc0: 8 targets, 8 luns per target
dsclock0 at hpc0 offset 0x60000
haltwo0 at hpc0 offset 0x58000: HAL2 revision 4.1.0
audio0 at haltwo0: half duplex
biomask 07 netmask 07 ttymask 0f clockmask bf
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 1 lun 0: <SGI, SEAGATE ST31230N, 0272> disk fixed
sd0: drive offline
sd0: sync (200.00ns offset 12), 8-bit (5.000MB/s) transfers, tagged queueing
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs

--FL5UXtIhxfXey3p5--