I tried to install NetBSD 1.6 on my old Indy box. Unfortunately, 
the installation failed when it tried to mount something... 
Looks like the (old) scsi disk didn;t settle in time???

Without disk it works nice. Any advice will be appreciated.

--
Roman

>> boot
Setting $netaddr to 192.168.144.211 (from server )
Obtaining /sash from server 
zs channel 0 had address 0xbfbd9830
 [ no symbols available ]
IOC rev 1, machine Indy (Guiness), board rev 3
Timer calibration, got 665000 cycles (665000, 665000, 665000)
CPU clock speed = 133.00Mhz
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.6 (RAMDISK_INDY) #0: Mon Sep  9 06:23:24 UTC 2002
    autobuild@tgm.daemon.org:/autobuild/sgimips/OBJ/autobuild/src/sys/arch/sgimips/compile/RAMDISK_INDY
49152 KB memory, 38468 KB free, 768 KB for ARCS, 2560 KB in 640 buffers
mainbus0 (root): SGI-IP22 [SGI, 69084746], 1 processor
cpu0 at mainbus0: QED R4600 Orion CPU (0x2020) Rev. 2.0 with built-in FPU Rev. 2.0
cpu0: 16KB/32B 2-way set-associative L1 Instruction cache, 48 TLB entries
cpu0: 16KB/32B 2-way set-associative write-back L1 Data cache
cpu0: disabling IP22 SysAD L2 cache
imc0 at mainbus0 addr 0x1fa00000
imc0: Revision 3
gio0 at imc0
hpc0 at gio0 addr 0x1fb80000: SGI HPC3
zsc0 at hpc0 offset 0x59830
zstty0 at zsc0 channel 1 (console i/o)
zstty1 at zsc0 channel 0
sq0 at hpc0 offset 0x54000: SGI Seeq 80c03
sq0: Ethernet address 08:00:69:08:47:46
wdsc0 at hpc0 offset 0x44000: WD33C93B SCSI, rev=0, target 7
scsibus2 at wdsc0: 8 targets, 8 luns per target
dsclock0 at hpc0 offset 0x60000
biomask 07 netmask 07 ttymask 0f clockmask bf
scsibus2: waiting 2 seconds for devices to settle...
MSGOUT Failed!
wd33c93_intr: LCI asr:c0 csr:1f
probe(wdsc0:0:2:0): wdsc0: timed out; asr=0x20 [acb 0x88aa7000 (flags 0x1, dleft 20)], <state 5, nexus 0x88aa7000, resid 20, msg(q 0,o 0)>probe(wdsc0:0:2:0): ABORT in timeout: csr=0xff, asr=0x20
probe(wdsc0:0:2:0): sending ABORT command
probe(wdsc0:0:2:0): Resetting bus
: WD33C93B SCSI, rev=0, target 7
probe(wdsc0:0:2:0): wdsc0: timed out; asr=0x00 [acb 0x88aa7000 (flags 0x41, dleft 20)], <state 8, nexus 0x88aa7000, resid 20, msg(q 0,o 0)>probe(wdsc0:0:2:0): ABORT in timeout: csr=0x01, asr=0x00
probe(wdsc0:0:2:0): sending ABORT command
probe(wdsc0:0:2:0): sending DISCONNECT to target
wd33c93_wait: TIMEO @877 with asr=x0 csr=x1
wd33c93_wait: TIMEO @877 with asr=x0 csr=x1
wd33c93_wait: TIMEO @877 with asr=x0 csr=x1
wd33c93_wait: TIMEO @877 with asr=x0 csr=x1
wd33c93_wait: TIMEO @877 with asr=x0 csr=x1
wd33c93_wait: TIMEO @877 with asr=x0 csr=x1
wd33c93_wait: TIMEO @877 with asr=x0 csr=x1
wd33c93_wait: TIMEO @877 with asr=x0 csr=x1
wd33c93_wait: TIMEO @877 with asr=x0 csr=x1
wd33c93_wait: TIMEO @877 with asr=x0 csr=x1
wd33c93_wait: TIMEO @877 with asr=x0 csr=x1
wd33c93_wait: TIMEO @877 with asr=x0 csr=x1
wd33c93_wait: TIMEO @877 with asr=x0 csr=x1
wd33c93_wait: TIMEO @877 with asr=x0 csr=x1
wd33c93_wait: TIMEO @877 with asr=x0 csr=x1
wd33c93_wait: TIMEO @877 with asr=x0 csr=x1
wd33c93_wait: TIMEO @877 with asr=x0 csr=x1
wd33c93_wait: TIMEO @877 with asr=x0 csr=x1
wd33c93_wait: TIMEO @877 with asr=x0 csr=x1
wd33c93_wait: TIMEO @877 with asr=x0 csr=x1
wd33c93_wait: TIMEO @877 with asr=x0 csr=x1
wd33c93_wait: TIMEO @877 with asr=x0 csr=x1
wd33c93_wait: TIMEO @877 with asr=x0 csr=x1
wd33c93_wait: TIMEO @877 with asr=x0 csr=x1
wd33c93_wait: TIMEO @877 with asr=x0 csr=x1
wd33c93_wait: TIMEO @877 with asr=x0 csr=x1
wd33c93_wait: TIMEO @877 with asr=x0 csr=x1
wd33c93_wait: TIMEO @877 with asr=x0 csr=x1
wd33c93_wait: TIMEO @877 with asr=x0 csr=x1

...reboot