Hi!

I successfully build my world but the kernel has problems.
My crosscompiled kernel from an older snapshot works but my kernel
compiled on the Indy with sources from 11/03/2001 produces the following:

...
scsibus0: waiting 5 seconds for devices to settle...
sd0 at scsibus0 target 3 lun 0: <COMPAQ, ST32550N, 6317> SCSI2 0/direct fixed
sd0: 2006 MB, 3511 cyl, 11 head, 106 sec, 512 bytes/sect x 4110000 sectors
sd1 at scsibus0 target 4 lun 0: <SGI, SEAGATE ST32430N, 0272> SCSI2 0/direct fixed
sd1: 2049 MB, 3992 cyl, 9 head, 116 sec, 512 bytes/sect x 4197405 sectors
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
Tue Nov  6 01:51:41 UTC 2001
swapctl: /dev/sd0b: Device not configured
swapctl: /dev/sd1b: Device not configured
Starting file system checks:
/dev/rsd0a: file system is clean; not checking
CANNOT READ: BLK 16
/dev/rsd0d: UNEXPECTED INCONSISTENCY; RUN fsck_ffs MANUALLY.
/dev/rsd1a: file system is clean; not checking
CANNOT READ: BLK 16
/dev/rsd1d: UNEXPECTED INCONSISTENCY; RUN fsck_ffs MANUALLY.
THE FOLLOWING FILE SYSTEMS HAD AN UNEXPECTED INCONSISTENCY:
        ffs: /dev/rsd0d (/tmp), ffs: /dev/rsd1d (/var)
Automatic file system check failed; help!

I build several kernels with different options (this one is the TEAL config
with the hpc2 line removed). The block that cannot be read is always 16.

I'll try to track down the problem but building kernels on that box
isn't fun.

CU, Hendrik

--
Hendrik Scholz <hendrik@scholz.net>
http://www.toppoint.de/~hscholz/
Where do you want to be tomorrow ?