On Fri, 26 Oct 2001, Hendrik Scholz wrote:
> It seems to me as if my partitions are wrong.

I have a 9(?) GB disk at sd1 that I use to boot from. Here are my
settings:

indy# disklabel sd1
# /dev/rsd1c:
type: SCSI
disk: ST39216N
label: fictitious
flags:
bytes/sector: 512
sectors/track: 417
tracks/cylinder: 3
sectors/cylinder: 1251
cylinders: 14342
total sectors: 17941842
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0           # microseconds
track-to-track seek: 0  # microseconds
drivedata: 0 

16 partitions:
#        size    offset     fstype  [fsize bsize cpg/sgs]
 a:  17676630      3753     4.2BSD   1024  8192    16   # (Cyl.    3 - 14132)
 b:    261459  17680383       swap                      # (Cyl. 14133 - 14341)
 c:  17941842         0    unknown                      # (Cyl.    0 - 14341)
 d:      3753         0    unknown                      # (Cyl.    0 - 2) 




indy# /usr/cvs/src-current/sys/arch/sgimips/stand.mhitch/sgivol/sgivol sd1
disklabel shows 17941842 sectors
checksum: 00000000
root part: 0
swap part: 1
bootfile: 

Volume header files:
sgiboot  offset    2 blocks, length   257235 bytes (503 blocks)

SGI partitions:
 0:a blocks 17676630 first     3753 type 10 (XFS)
 1:b blocks   261459 first 17680383 type  3 (Raw)
 8:i blocks     3753 first        0 type  0 (Volume Header)
10:k blocks 17941842 first        0 type  6 (Volume)


 - Hubert

-- 
Want to get a clue on IPv6 but don't know where to start? Try this:
* Basics -> http://www.onlamp.com/pub/a/onlamp/2001/05/24/ipv6_tutorial.html
* Setup  -> http://www.onlamp.com/pub/a/onlamp/2001/06/01/ipv6_tutorial.html 
Of course with your #1 IPv6 ready operating system -> http://www.NetBSD.org/