Port-prep archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

S3 864 xserver work



Hi! all


X of xorg works on my prep machine.
Also I support S3 864 and GENDAC/SDAC.

  ftp://ftp.netbsd.org/pub/NetBSD/misc/kiyohara/xserver/prep
    (This binaries was builded from current 20081128.)


patchs:
  ftp://ftp.netbsd.org/pub/NetBSD/misc/kiyohara/xserver/

    src-xorg-s3-support.diff
    xsrc-xorg-s3-support.diff
        generic s3 driver requires this patchs.
        Or another plan patchs.
          src-xorg-s3-support-another_plan.diff
          xsrc-xorg-s3-support-another_plan.diff

    src-bebox_prep-xserver-support.diff
    src-xorg-bebox_prep-support.diff
    xsrc-xorg-bebox_prep-support.diff
        bebox and prep requires.

    src-xorg-s3-864-support.diff
    xsrc-xorg-s3-864-support.diff
        S3 864 and GENDAC/SDAC support.

    vga_pci-PCI_MAGIC_IO_RANGE.diff
        Also maybe better.


hmm...
My prep works size 1024x768.  However I look my monitor displays 512x768
perhaps.  This reason not know...  My Xorg.0.log attaches to this mail.
If you test then please report to me.

Thanks,
--
kiyohara

X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: NetBSD/prep  - 
Current Operating System: NetBSD justice.fool 5.99.3 NetBSD 5.99.3 (JUSTICE) 
#0: Sun Dec 21 10:42:29 JST 2008  
lance%highpriestess.fool@localhost:/usr/src/sys/arch/prep/compile/JUSTICE prep
Build Date: 11 June 2008  04:31:59PM
 
        Before reporting problems, check http://wiki.X.Org
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan  9 23:16:45 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R7/lib/X11/fonts/Speedo/".
        Entry deleted from font path.
        (Run 'mkfontdir' on "/usr/X11R7/lib/X11/fonts/Speedo/").
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R7/lib/X11/fonts/CID/".
        Entry deleted from font path.
        (Run 'mkfontdir' on "/usr/X11R7/lib/X11/fonts/CID/").
(==) Including the default font path 
/usr/X11R7/lib/X11/fonts/misc/,/usr/X11R7/lib/X11/fonts/TTF/,/usr/X11R7/lib/X11/fonts/Speedo/,/usr/X11R7/lib/X11/fonts/Type1/,/usr/X11R7/lib/X11/fonts/CID/,/usr/X11R7/lib/X11/fonts/75dpi/,/usr/X11R7/lib/X11/fonts/100dpi/.
(**) FontPath set to:
        /usr/X11R7/lib/X11/fonts/misc/,
        /usr/X11R7/lib/X11/fonts/TTF/,
        /usr/X11R7/lib/X11/fonts/Type1/,
        /usr/X11R7/lib/X11/fonts/75dpi/,
        /usr/X11R7/lib/X11/fonts/100dpi/,
        /usr/X11R7/lib/X11/fonts/misc/,
        /usr/X11R7/lib/X11/fonts/TTF/,
        /usr/X11R7/lib/X11/fonts/Speedo/,
        /usr/X11R7/lib/X11/fonts/Type1/,
        /usr/X11R7/lib/X11/fonts/CID/,
        /usr/X11R7/lib/X11/fonts/75dpi/,
        /usr/X11R7/lib/X11/fonts/100dpi/
(**) RgbPath set to "/usr/X11R7/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R7/lib/modules"
(II) Loader magic: 0x19d0880
(II) Module ABI versions:
        X.Org ANSI C Emulation: 0.3
        X.Org Video Driver: 2.0
        X.Org XInput driver : 2.0
        X.Org Server Extension : 0.3
        X.Org Font Renderer : 0.5
(II) Loader running on netbsd
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R7/lib/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
        compiled for 1.4.2, module version = 1.0.0
        ABI class: X.Org Video Driver, version 2.0
(--) Using wscons driver
(WW) OS did not count PCI devices, guessing wildly
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 5333,88c1 card 0000,0000 rev 00 class 00,01,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,0), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
        [0] -1  0       0x00000000 - 0xffffffff (0x0) IX[B]
(II) Bus 0 non-prefetchable memory range:
        [0] -1  0       0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
        [0] -1  0       0x00000000 - 0xffffffff (0x0) MX[B]
(--) PCI:*(0:0:0) S3 Inc. 86c864 [Vision 864 DRAM] vers 1 rev 0, Mem @ 
0x08000000/23, BIOS @ 0x08810000/16
(II) Addressable bus resource ranges are
        [0] -1  0       0x00000000 - 0xffffffff (0x0) MX[B]
        [1] -1  0       0x00000000 - 0xffffffff (0x0) IX[B]
(II) OS-reported resource ranges:
        [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]
        [1] -1  0       0x00000000 - 0x00000000 (0x1) MX[B]
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1  0       0xffffffff - 0xffffffff (0x1) IX[B]
        [4] -1  0       0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
        [0] -1  0       0x08810000 - 0x0881ffff (0x10000) MX[B](B)
        [1] -1  0       0x08000000 - 0x087fffff (0x800000) MX[B](B)
(II) Active PCI resource ranges after removing overlaps:
        [0] -1  0       0x08810000 - 0x0881ffff (0x10000) MX[B](B)
        [1] -1  0       0x08000000 - 0x087fffff (0x800000) MX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
        [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]
        [1] -1  0       0x00000000 - 0x00000000 (0x1) MX[B]
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1  0       0xffffffff - 0xffffffff (0x1) IX[B]
        [4] -1  0       0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
        [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]
        [1] -1  0       0x00000000 - 0x00000000 (0x1) MX[B]
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1  0       0x08810000 - 0x0881ffff (0x10000) MX[B](B)
        [4] -1  0       0x08000000 - 0x087fffff (0x800000) MX[B](B)
        [5] -1  0       0xffffffff - 0xffffffff (0x1) IX[B]
        [6] -1  0       0x00000000 - 0x000000ff (0x100) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in 
the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in 
the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in 
the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified 
in the config file.
(II) "type1" will be loaded. This was enabled by default and also specified in 
the config file.
(II) "record" will be loaded. This was enabled by default and also specified in 
the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in 
the config file.
(II) LoadModule: "cfb"
(II) Loading /usr/X11R7/lib/modules/extensions//libcfb.so
(II) Module cfb: vendor="X.Org Foundation"
        compiled for 1.4.2, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "mfb"
(II) LoadModule: "mfb"
(II) Loading /usr/X11R7/lib/modules/extensions//libmfb.so
(II) Module mfb: vendor="X.Org Foundation"
        compiled for 1.4.2, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.3
(II) LoadModule: "cfb32"
(II) Loading /usr/X11R7/lib/modules/extensions//libcfb32.so
(II) Module cfb32: vendor="X.Org Foundation"
        compiled for 1.4.2, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "cfb"
(II) LoadModule: "cfb"
(II) Reloading /usr/X11R7/lib/modules/extensions//libcfb.so
(II) Loading sub module "mfb"
(II) LoadModule: "mfb"
(II) Reloading /usr/X11R7/lib/modules/extensions//libmfb.so
(II) LoadModule: "dbe"
(II) Loading /usr/X11R7/lib/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
        compiled for 1.4.2, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/X11R7/lib/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
        compiled for 1.4.2, module version = 1.0.0
        ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R7/lib/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
        compiled for 1.4.2, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/X11R7/lib/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
        compiled for 1.4.2, module version = 1.0.0
        ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "mfb"
(II) Reloading /usr/X11R7/lib/modules/extensions//libmfb.so
(II) LoadModule: "record"
(II) Loading /usr/X11R7/lib/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
        compiled for 1.4.2, module version = 1.13.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "shadow"
(II) Loading /usr/X11R7/lib/modules/extensions//libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
        compiled for 1.4.2, module version = 1.1.0
        ABI class: X.Org ANSI C Emulation, version 0.3
(II) LoadModule: "xtrap"
(II) Loading /usr/X11R7/lib/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
        compiled for 1.4.2, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DEC-XTRAP
(II) LoadModule: "freetype"
(II) Loading /usr/X11R7/lib/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
        compiled for 1.4.2, module version = 2.1.0
        Module class: X.Org Font Renderer
        ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/X11R7/lib/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
        compiled for 1.4.2, module version = 1.0.2
        Module class: X.Org Font Renderer
        ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "s3"
(II) Loading /usr/X11R7/lib/modules/drivers//s3_drv.so
(II) Module s3: vendor="X.Org Foundation"
        compiled for 1.4.2, module version = 0.5.0
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/X11R7/lib/modules/drivers//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
        compiled for 1.4.2, module version = 1.3.0
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/X11R7/lib/modules/drivers//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
        compiled for 1.4.2, module version = 1.3.1
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 2.0
(II) S3: driver (version 0.5.0 for S3 chipset: 864-0, 864-1, 964-0, 964-1,
        968, Trio32/64, Aurora64V+, Trio64UV+, Trio64V2/DX/GX
(WW) xf86EnableIO 5
(II) xf86EnableIO: ef5f0000
(II) Primary Device is: PCI 00:00:0
(--) Chipset 864-1 found
(II) resource ranges after xf86ClaimFixedResources() call:
        [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]
        [1] -1  0       0x00000000 - 0x00000000 (0x1) MX[B]
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1  0       0x08810000 - 0x0881ffff (0x10000) MX[B](B)
        [4] -1  0       0x08000000 - 0x087fffff (0x800000) MX[B](B)
        [5] -1  0       0xffffffff - 0xffffffff (0x1) IX[B]
        [6] -1  0       0x00000000 - 0x000000ff (0x100) IX[B]
(II) resource ranges after probing:
        [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]
        [1] -1  0       0x00000000 - 0x00000000 (0x1) MX[B]
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1  0       0x08810000 - 0x0881ffff (0x10000) MX[B](B)
        [4] -1  0       0x08000000 - 0x087fffff (0x800000) MX[B](B)
        [5] 0   0       0x000a0000 - 0x000affff (0x10000) MS[B]
        [6] 0   0       0x000b0000 - 0x000b7fff (0x8000) MS[B]
        [7] 0   0       0x000b8000 - 0x000bffff (0x8000) MS[B]
        [8] -1  0       0xffffffff - 0xffffffff (0x1) IX[B]
        [9] -1  0       0x00000000 - 0x000000ff (0x100) IX[B]
        [10] 0  0       0x000003b0 - 0x000003bb (0xc) IS[B]
        [11] 0  0       0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R7/lib/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
        compiled for 1.4.2, module version = 0.1.0
        ABI class: X.Org Video Driver, version 2.0
(II) s3(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(**) s3(0): Depth 16, (--) framebuffer bpp 16
(==) s3(0): RGB weight 565
(==) s3(0): Default visual is TrueColor
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R7/lib/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
        compiled for 1.4.2, module version = 1.0.0
        ABI class: X.Org Video Driver, version 2.0
(WW) xf86EnableIO 5
(II) s3(0): No legacy BIOS found -- trying PCI
(EE) s3(0): Cannot read V_BIOS (5)
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R7/lib/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
        compiled for 1.4.2, module version = 1.1.0
        ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R7/lib/modules//libint10.so
(II) s3(0): initializing int10
(II) s3(0): No legacy BIOS found -- trying PCI
(EE) s3(0): Cannot read V_BIOS (5)
(==) s3(0): Using gamma correction (1.0, 1.0, 1.0)
(**) s3(0): Chipset: "864-1"
(II) Loading sub module "s3_accel_pio"
(II) LoadModule: "s3_accel_pio"
(II) Loading /usr/X11R7/lib/modules/drivers//s3_accel_pio.so
(II) Module s3_accel: vendor="X.Org Foundation"
        compiled for 1.4.2, module version = 1.0.0
        ABI class: X.Org Video Driver, version 2.0
(--) s3(0): Framebuffer @ 0x8000000
(--) s3(0): videoRam = 2048 Kb
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(--) s3(0): MCLK 59.957 MHz
(--) s3(0): RefClock: 16000
(--) s3(0): Max pixel clock at this depth is 95 Mhz
(II) s3(0): Monitor0: Using hsync range of 24.80-81.10 kHz
(II) s3(0): Monitor0: Using vrefresh range of 56.00-76.00 Hz
(WW) s3(0): Unable to estimate virtual size
(II) s3(0): Clock range:  15.60 to  95.00 MHz
(II) s3(0): Not using default mode "640x350" (vrefresh out of range)
(II) s3(0): Not using default mode "320x175" (vrefresh out of range)
(II) s3(0): Not using default mode "640x400" (vrefresh out of range)
(II) s3(0): Not using default mode "320x200" (vrefresh out of range)
(II) s3(0): Not using default mode "720x400" (vrefresh out of range)
(II) s3(0): Not using default mode "360x200" (vrefresh out of range)
(II) s3(0): Not using default mode "640x480" (vrefresh out of range)
(II) s3(0): Not using default mode "320x240" (vrefresh out of range)
(II) s3(0): Not using default mode "800x600" (vrefresh out of range)
(II) s3(0): Not using default mode "400x300" (vrefresh out of range)
(II) s3(0): Not using default mode "1024x768" (vrefresh out of range)
(II) s3(0): Not using default mode "512x384" (vrefresh out of range)
(II) s3(0): Not using default mode "1024x768" (vrefresh out of range)
(II) s3(0): Not using default mode "512x384" (vrefresh out of range)
(II) s3(0): Not using default mode "1280x960" (insufficient memory for mode)
(II) s3(0): Not using default mode "1280x960" (insufficient memory for mode)
(II) s3(0): Not using default mode "640x480" (hsync out of range)
(II) s3(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) s3(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) s3(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) s3(0): Not using default mode "640x512" (hsync out of range)
(II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) s3(0): Not using default mode "800x600" (hsync out of range)
(II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) s3(0): Not using default mode "800x600" (hsync out of range)
(II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) s3(0): Not using default mode "800x600" (hsync out of range)
(II) s3(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) s3(0): Not using default mode "896x672" (hsync out of range)
(II) s3(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) s3(0): Not using default mode "896x672" (hsync out of range)
(II) s3(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) s3(0): Not using default mode "928x696" (hsync out of range)
(II) s3(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) s3(0): Not using default mode "928x696" (hsync out of range)
(II) s3(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) s3(0): Not using default mode "960x720" (hsync out of range)
(II) s3(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) s3(0): Not using default mode "960x720" (hsync out of range)
(II) s3(0): Not using default mode "1152x768" (vrefresh out of range)
(II) s3(0): Not using default mode "576x384" (vrefresh out of range)
(II) s3(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) s3(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) s3(0): Not using default mode "1600x1024" (insufficient memory for mode)
(II) s3(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) s3(0): Not using default mode "960x720" (hsync out of range)
(II) s3(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) s3(0): Not using default mode "1024x768" (hsync out of range)
(II) s3(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) s3(0): Not using default mode "1024x768" (hsync out of range)
(II) s3(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) s3(0): Not using default mode "1024x768" (hsync out of range)
(II) s3(0): Not using mode "1152x864" (bad mode clock/interlace/doublescan)
(--) s3(0): Virtual size is 1024x768 (pitch 1024)
(**) s3(0): *Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
(II) s3(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 
800 +hsync +vsync (60.0 kHz)
(**) s3(0): *Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) s3(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 
806 -hsync -vsync (56.5 kHz)
(**) s3(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) s3(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 
806 -hsync -vsync (48.4 kHz)
(**) s3(0): *Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) s3(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 
-hsync -vsync (49.7 kHz)
(**) s3(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) s3(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 
+hsync +vsync (46.9 kHz)
(**) s3(0): *Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) s3(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 
+hsync +vsync (48.1 kHz)
(**) s3(0): *Default mode "800x600": 87.8 MHz, 81.2 kHz, 65.0 Hz (D)
(II) s3(0): Modeline "800x600"x65.0   87.75  800 832 928 1080  600 600 602 625 
doublescan +hsync +vsync (81.2 kHz)
(**) s3(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) s3(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 
+hsync +vsync (37.9 kHz)
(**) s3(0): *Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D)
(II) s3(0): Modeline "800x600"x60.0   81.00  800 832 928 1080  600 600 602 625 
doublescan +hsync +vsync (75.0 kHz)
(**) s3(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) s3(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 
+hsync +vsync (35.2 kHz)
(**) s3(0): *Default mode "700x525": 77.9 MHz, 81.5 kHz, 74.8 Hz (D)
(II) s3(0): Modeline "700x525"x74.8   77.90  700 732 892 956  525 526 532 545 
doublescan +hsync +vsync (81.5 kHz)
(**) s3(0): *Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
(II) s3(0): Modeline "700x525"x60.0   61.00  700 744 820 940  525 526 532 541 
doublescan +hsync +vsync (64.9 kHz)
(**) s3(0): *Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D)
(II) s3(0): Modeline "640x512"x75.0   67.50  640 648 720 844  512 512 514 533 
doublescan +hsync +vsync (80.0 kHz)
(**) s3(0): *Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
(II) s3(0): Modeline "640x512"x60.0   54.00  640 664 720 844  512 512 514 533 
doublescan +hsync +vsync (64.0 kHz)
(**) s3(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) s3(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 
-hsync -vsync (37.5 kHz)
(**) s3(0): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) s3(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 
-hsync -vsync (37.9 kHz)
(**) s3(0): *Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(II) s3(0): Modeline "640x480"x60.0   54.00  640 688 744 900  480 480 482 500 
doublescan +hsync +vsync (60.0 kHz)
(**) s3(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) s3(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 
-hsync -vsync (31.5 kHz)
(**) s3(0): *Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
(II) s3(0): Modeline "576x432"x75.0   54.00  576 608 672 800  432 432 434 450 
doublescan +hsync +vsync (67.5 kHz)
(**) s3(0): *Default mode "512x384": 39.4 MHz, 60.0 kHz, 75.0 Hz (D)
(II) s3(0): Modeline "512x384"x75.0   39.38  512 520 568 656  384 384 386 400 
doublescan +hsync +vsync (60.0 kHz)
(**) s3(0): *Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) s3(0): Modeline "512x384"x70.1   37.50  512 524 592 664  384 385 388 403 
doublescan -hsync -vsync (56.5 kHz)
(**) s3(0): *Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) s3(0): Modeline "512x384"x60.0   32.50  512 524 592 672  384 385 388 403 
doublescan -hsync -vsync (48.4 kHz)
(**) s3(0): *Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) s3(0): Modeline "416x312"x74.7   28.64  416 432 464 576  312 312 314 333 
doublescan -hsync -vsync (49.7 kHz)
(**) s3(0): *Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) s3(0): Modeline "400x300"x75.1   24.75  400 408 448 528  300 300 302 312 
doublescan +hsync +vsync (46.9 kHz)
(**) s3(0): *Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) s3(0): Modeline "400x300"x72.2   25.00  400 428 488 520  300 318 321 333 
doublescan +hsync +vsync (48.1 kHz)
(**) s3(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) s3(0): Modeline "400x300"x60.3   20.00  400 420 484 528  300 300 302 314 
doublescan +hsync +vsync (37.9 kHz)
(**) s3(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) s3(0): Modeline "400x300"x56.3   18.00  400 412 448 512  300 300 301 312 
doublescan +hsync +vsync (35.2 kHz)
(**) s3(0): *Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(II) s3(0): Modeline "320x240"x75.0   15.75  320 328 360 420  240 240 242 250 
doublescan -hsync -vsync (37.5 kHz)
(**) s3(0): *Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(II) s3(0): Modeline "320x240"x72.8   15.75  320 332 352 416  240 244 246 260 
doublescan -hsync -vsync (37.9 kHz)
(==) s3(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R7/lib/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
        compiled for 1.4.2, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R7/lib/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
        compiled for 1.4.2, module version = 1.2.0
        ABI class: X.Org Video Driver, version 2.0
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
        [0] 0   0       0x08000000 - 0x087fffff (0x800000) MS[B]
        [1] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]
        [2] -1  0       0x00000000 - 0x00000000 (0x1) MX[B]
        [3] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1  0       0x08810000 - 0x0881ffff (0x10000) MX[B](B)
        [5] -1  0       0x08000000 - 0x087fffff (0x800000) MX[B](B)
        [6] 0   0       0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
        [7] 0   0       0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
        [8] 0   0       0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
        [9] -1  0       0xffffffff - 0xffffffff (0x1) IX[B]
        [10] -1 0       0x00000000 - 0x000000ff (0x100) IX[B]
        [11] 0  0       0x000003b0 - 0x000003bb (0xc) IS[B]
        [12] 0  0       0x000003c0 - 0x000003df (0x20) IS[B]
(==) s3(0): Backing store disabled
(II) s3(0): Using XFree86 Acceleration Architecture (XAA)
        Screen to screen bit blits
        Solid filled rectangles
        8x8 color pattern filled rectangles
        Solid Lines
(II) s3(0): Acceleration enabled
(II) s3(0): Using PIO
(II) s3(0): Using SW cursor
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R7/lib/modules/extensions//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
        compiled for 1.4.2, module version = 1.0.0
        ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(**) Option "Protocol" "wsmouse"
(**) Mouse0: Protocol: wsmouse
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/wsmouse"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "wskbd"
(**) Keyboard0: Protocol: wskbd
(**) Option "Device" "/dev/wskbd0"
(--) Keyboard0: Keyboard type: XT
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) evaluating device (Mouse0)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
Could not init font path element /usr/X11R7/lib/X11/fonts/Speedo/, removing 
from list!
Could not init font path element /usr/X11R7/lib/X11/fonts/CID/, removing from 
list!
(WW) xf86MapVidMem: could not mmap screen [s=10000,a=a0000] (Bad file 
descriptor)(EE) s3(0): vgaHWRestoreFonts: vgaHWMapMem() failed
FreeFontPath: FPE "/usr/X11R7/lib/X11/fonts/misc/" refcount is 2, should be 1; 
fixing.
(EE) netbsdPciConfRead: failed on ttyE0
(EE) netbsdPciConfRead: failed on ttyE0
(EE) netbsdPciConfRead: failed on ttyE0
(EE) netbsdPciConfRead: failed on ttyE0
(EE) netbsdPciConfRead: failed on ttyE0
(EE) netbsdPciConfRead: failed on ttyE0
(EE) netbsdPciConfRead: failed on ttyE0
(EE) netbsdPciConfRead: failed on ttyE0
(EE) netbsdPciConfRead: failed on ttyE0

Fatal server error:
netbsdPciConfWrite: failed on ttyE0


Please consult the The X.Org Foundation support 
         at http://wiki.X.Org
 for help. 
Please also check the log file at "/var/log/Xorg.0.log" for additional 
information.

Section "ServerLayout"
        Identifier     "X.org Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
        RgbPath      "/usr/X11R7/lib/X11/rgb"
        ModulePath   "/usr/X11R7/lib/modules"
        FontPath     "/usr/X11R7/lib/X11/fonts/misc/"
        FontPath     "/usr/X11R7/lib/X11/fonts/TTF/"
        FontPath     "/usr/X11R7/lib/X11/fonts/Speedo/"
        FontPath     "/usr/X11R7/lib/X11/fonts/Type1/"
        FontPath     "/usr/X11R7/lib/X11/fonts/CID/"
        FontPath     "/usr/X11R7/lib/X11/fonts/75dpi/"
        FontPath     "/usr/X11R7/lib/X11/fonts/100dpi/"
EndSection

Section "Module"
        Load  "GLcore"
        Load  "cfb"
        Load  "cfb32"
        Load  "dbe"
        Load  "dri"
        Load  "extmod"
        Load  "glx"
        Load  "mfb"
        Load  "record"
        Load  "shadow"
        Load  "xtrap"
        Load  "freetype"
        Load  "type1"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
        Option      "Protocol" "wskbd"
        Option      "Device" "/dev/wskbd0"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "wsmouse"
        Option      "Device" "/dev/wsmouse"
        Option      "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
        HorizSync    24.8 - 81.1
        VertRefresh  56.0 - 76.0
EndSection


Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "noaccel"                   # [<bool>]
        #Option     "swcursor"                  # [<bool>]
        #Option     "slow_dram_refresh"         # [<bool>]
        #Option     "slow_dram"                 # [<bool>]
        #Option     "slow_edodram"              # [<bool>]
        #Option     "slow_vram"                 # [<bool>]
        Identifier  "Card0"
        Driver      "s3"
        VendorName  "S3 Inc."
#       BoardName   "86c764/765 [Trio32/64/64V+]"
        BusID       "PCI:0:0:0"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "Monitor0"
        DefaultDepth      16
        SubSection "Display"
                Viewport   0 0
                Depth     8
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     15
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     16
        EndSubSection
EndSection


Home | Main Index | Thread Index | Old Index