Here is the dmesg for 7043 with 060606 -current

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 
2006
     The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 
2006
     The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.

NetBSD 3.99.20 (GENERIC) #0: Tue Jun  6 08:55:22 UTC 2006

builds@b3.netbsd.org:/home/builds/ab/HEAD/prep/200606060000Z-obj/home/builds/ab/HEAD/src/sys/arch/prep/compile/GENERIC
Model: IBM Model 7042/7043 (ED)
total memory = 128 MB
avail memory = 120 MB
mainbus0 (root)
cpu0 at mainbus0: 604e (Revision 2.2), ID 0 (primary)
cpu0: HID0 c084<ICE,DCE,SGE,BHT>
cpu0: 166.67 MHz
pci0 at mainbus0 bus 0: indirect configuration space access
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Motorola MPC106 "Grackle" Host Bridge (rev. 0x30)
pcib0 at pci0 dev 11 function 0: IBM ISA Bridge w/PnP (rev. 0x03)
pcib0: PIRQ[0-3] not used
pcn0 at pci0 dev 12 function 0: AMD PCnet-PCI Ethernet
pcn0: Am79c970A PCnet-PCI II rev 6, Ethernet address 00:06:29:20:09:01
pcn0: interrupting at irq 22
pcn0: 10base5, 10base5-FDX, 10baseT, 10baseT-FDX, auto, auto-FDX
IBM MPIC (undefined subclass 0x00) at pci0 dev 13 function 0 not 
configured
esiop0 at pci0 dev 16 function 0: Symbios Logic 53c825a (fast wide scsi)
esiop0: using on-board RAM
esiop0: interrupting at irq 23
scsibus0 at esiop0: 16 targets, 8 luns per target
Matrox MGA G200 PCI (VGA display, revision 0x01) at pci0 dev 18 function 0 
not configured
ppb0 at pci0 dev 23 function 0: IBM 82351 PCI-PCI Bridge (rev. 0x01)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ex0 at pci1 dev 2 function 0: 3Com 3c905-TX 10/100 Ethernet (rev. 0x0)
ex0: interrupting at irq 21
ex0: MAC address 02:60:8c:f2:0c:40
nsphy0 at ex0 phy 24: DP83840 10/100 media interface, rev. 1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
IBM Auto LANStreamer (token ring network, revision 0x02) at pci1 dev 3 
function 0 not configured
isa0 at pcib0
lpt0 at isa0 port 0x3bc-0x3bf irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
isabeep0 at pcppi0
mcclock0 at isa0 port 0x70-0x71: mc146818 compatible time-of-day clock
pcppi0: attached to attimer0
pnpbus0 at mainbus0
nvram0 at pnpbus0: port 0x74-0x75 0x76
nvram0: Read 7168 bytes from nvram of size 8192
biomask 800000 netmask e00000 ttymask e00080
Kernelized RAIDframe activated
scsibus0: waiting 2 seconds for devices to settle...
boot device: ex0
root on ex0
nfs_boot: trying DHCP/BOOTP
nfs_boot: DHCP next-server: 24.153.143.183
nfs_boot: my_addr=24.153.143.187
nfs_boot: my_mask=255.255.255.0
root on 24.153.143.183:/stuff/prep
root file system type: nfs


-Ober


On Tue, 13 Jun 2006, Tim Rightnour wrote:

> Date: Tue, 13 Jun 2006 13:26:05 -0700 (MST)
> From: Tim Rightnour <root@garbled.net>
> To: ober <ober@linbsd.org>
> Cc: port-prep@NetBSD.org
> Subject: Re: Issues netbooting 7043
> 
>
> On 13-Jun-2006 ober wrote:
>> Well, it definately shows up now on console.
>> I have tried using -current as of 060606 and also
>> 3.0.
>> It boots up to a point where the login prompt should kick in, but then
>> pukes.
>
> Could I see the dmesg/console output from the 6/6/6 -current boot?   3.0 is
> rather..  flaky on these machines, and fixing 3.0 on them is rather low on my
> list of things to worry about.
-current also fails at same spot.

>
> As for the VGA console.. yeah..  we only have real console support for the S3
> video card on the 7248.  Everything else is rather hit or miss.
My 7248 works fine with integrated video.
It's my 7043 that requires console.



>
> Just to be sure.. you said this was a 7043-140.. right?
Yes, 7043-140
>
> Also.. i notice in your output:
>
> savecore: /dev/wd0a: Device not configured
> Mounting all filesystems...
> Jun 13 13:41:02 prep savecore: /dev/wd0a: Device not configured
> Clearing /tmp.
>
> Are you trying to have it boot off the root filesystem of the 7248?
No the nfs root filesystem is a amd64.
Not sure why the kernel looks for wd0a, as it has never been configured 
accorrdingly.


Hope this helps.
>
> ---
> Tim Rightnour <root@garbled.net>
> NetBSD: Free multi-architecture OS http://www.netbsd.org/
> Genecys: Open Source 3D MMORPG: http://www.genecys.org/
>