On 2003.05.23 13:34 Michael Lorenz wrote:

> just one question - I have a PowerStack II, Utah mainboard ( at least
> I think so ), 300MHz 604e. Currently it runs AIX - is NetBSD any use=20
> yet on this machine?
Update: The ISA bus attachment works, see below.
Now I am trying to understand the machine dependent interrupt handling
stuff...=20

ok boot net
Boot device: /pci/ethernet@4  File and args:=20
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.6 (PSII) #5: Fri May 30 11:39:58 CEST 2003
    jkunz@SirTobie:/usr/src/sys/arch/ofppc/compile/PSII
total memory =3D 128 MB
avail memory =3D 112 MB
using 1664 buffers containing 6656 KB of memory
mainbus0 (root): MOT,PowerStack_II_Pro4000
cpu0 at mainbus0: 604ev (Revision 2.3), ID 0 (primary)
cpu0: HID0 8090c084<EMCP,DOZE,DPM,ICE,DCE,SGE,BHT>
powerstackII0 at mainbus0powerstackII_isa_init
powerstackII_isa_intr_init
: IBM 27-82660 PCI Bridge, rev. 0x02
pci0 at powerstackII0 bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pcib0 at pci0 dev 11 function 0
pcib0:
powerstackII_isa_init_icu
pcib0: vendor 0x10ad product 0x0565 (rev. 0x10)
pciide0 at pci0 dev 11 function 1: Symphony Labs 82C105 IDE controller
(rev. 0x05)
pciide0: bus-master DMA support present
pciide0: primary channel configured to native-PCI mode
powerstackII_pci_intr_map: 0/11/1 at ISA IRQ 14 ??
pciide0: couldn't map native-PCI interrupt
pciide0: secondary channel configured to native-PCI mode
powerstackII_pci_intr_map: 0/11/1 at ISA IRQ 14 ??
pciide0: couldn't map native-PCI interrupt
siop0 at pci0 dev 12 function 0: Symbios Logic 53c825a (fast wide scsi)
siop0: using on-board RAM
powerstackII_pci_intr_map: 0/12/0 at ISA IRQ 15 ??
siop0: couldn't map interrupt
tlp0 at pci0 dev 14 function 0: DECchip 21140A Ethernet, pass 2.2
powerstackII_pci_intr_map: 0/14/0 at ISA IRQ 11 ??
tlp0: unable to map interrupt
isa0 at pcib0powerstackII_isa_attach_hook

com0 at isa0 port 0x3f8-0x3ff irq : ns16550a, working fifo
powerstackII_isa_intr_establish
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
powerstackII_isa_intr_establish
pckbc0 at isa0 port 0x60-0x64
lpt0 at isa0 port 0x3bc-0x3bf irq 7
powerstackII_isa_intr_establish
pcppi0 at isa0 port 0x61
isabeep0 at pcppi0
led at mainbus0 not configured
Planar-ID at mainbus0 not configured
ofbus0 at mainbus0
aix at ofbus0 not configured
flash at mainbus0 not configured
flash at mainbus0 not configured
boot device: <unknown>
root device: halt
syncing disks... done
halted

ok=20

--=20


tsch=FC=DF,
       Jochen

Homepage: http://www.unixag-kl.fh-kl.de/~jkunz/