>
> > What options did you use for dump ?
> > restore -b 10 will probably work ...
>
> My dump/restore parameters
>  --> # dump 0cebBf 10 4096000 /dev/rmt0
>                    # under 1.5.2; Tape: TLZ06 (2/4GB), 90m tape cartridge
>
>  --> # restore -r -b 10 -s 1 -f /dev/st0
>                    # under 1.6 installation kernel
>
> I think this 2048-byte limit is caused by the (installation) shell.

>No, there's no reasons sells limits would have an infliuence here.
>More likely is's caused by the block driver.
>Try /dev/rst0 instead of /dev/st0 for restore.

Yes, you're right! /dev/rst0 does it.

(Btw. with the installed 1.6: csh had the same "problem", ksh worked ok with
the /dev/st0 device.)