Hi, Manuel!
Hi, everyone!

I'm booting from the DS5K iso-cd into the memyroy resident installation
environment. At this time there is no /etc/fstab used (at least that I know
of).

Btw.:I have the same effect with another pmax (5K50).

Under 1.5.2 I used the _rz_ style SCSI devices/device names. 1.6 uses the
new _sd_ style device names (MI SCSI?). I suspect the the correspondig SCSI
drivers are not compatible. Is that correct?

Has anyone else _upgraded_ from 1.5.x to 1.6 instead of installing 1.6 from
scratch?

Best regards. / Hilmar.



----------------------------------
The 5K50 maxine:

Dec 19 01:11:39 pmax50 /netbsd: Copyright (c) 1996, 1997, 1998, 1999, 2000,
2001
Dec 19 01:11:39 pmax50 /netbsd:     The NetBSD Foundation, Inc.  All rights
reserved.
Dec 19 01:11:39 pmax50 /netbsd: Copyright (c) 1982, 1986, 1989, 1991, 1993
Dec 19 01:11:39 pmax50 /netbsd:     The Regents of the University of
California.  All rights reserved.
Dec 19 01:11:39 pmax50 /netbsd:
Dec 19 01:11:39 pmax50 /netbsd: NetBSD 1.5.2 (PMAX50) #0: Wed Mar 13
14:03:14 CET 2002
Dec 19 01:11:39 pmax50 /netbsd:
root@pmax50:/mnt/NetBSD-1.5.2/usr/src/sys/arch/pmax/compile/PMAX50
Dec 19 01:11:39 pmax50 /netbsd: Personal DECstation 5000/50 (MAXINE)
Dec 19 01:11:39 pmax50 /netbsd: total memory = 40960 KB
Dec 19 01:11:39 pmax50 /netbsd: avail memory = 35136 KB
Dec 19 01:11:39 pmax50 /netbsd: using 537 buffers containing 2148 KB of
memory
Dec 19 01:11:39 pmax50 /netbsd: mainbus0 (root)
Dec 19 01:11:39 pmax50 /netbsd: cpu0 at mainbus0: MIPS R4000 CPU (0x430)
Rev. 3.0 with MIPS R4010 FPC Rev. 0.0
Dec 19 01:11:39 pmax50 /netbsd: cpu0: L1 cache: 8KB/16B instruction, 8KB/16B
data, direct mapped
Dec 19 01:11:39 pmax50 /netbsd: cpu0: L2 cache: 1024KB/32B mixed, no
snooping
Dec 19 01:11:39 pmax50 /netbsd: tc0 at mainbus0: 12.5 MHz clock
Dec 19 01:11:39 pmax50 /netbsd: ioasic0 at tc0 slot 3 offset 0x0
Dec 19 01:11:39 pmax50 /netbsd: le0 at ioasic0 offset 0xc0000: address
08:00:2b:2c:41:ff
Dec 19 01:11:39 pmax50 /netbsd: le0: 32 receive buffers, 8 transmit buffers
Dec 19 01:11:40 pmax50 /netbsd: scc0 at ioasic0 offset 0x100000: console
Dec 19 01:11:40 pmax50 /netbsd: mcclock0 at ioasic0 offset 0x200000:
mc146818 or compatible
Dec 19 01:11:40 pmax50 /netbsd: bba0 at ioasic0 offset 0x240000
Dec 19 01:11:40 pmax50 /netbsd: audio0 at bba0: full duplex, mmap
Dec 19 01:11:40 pmax50 /netbsd: dtop0 at ioasic0 offset 0x280000
Dec 19 01:11:40 pmax50 /netbsd: fdc at ioasic0 offset 0x2c0000 not
configured
Dec 19 01:11:40 pmax50 /netbsd: asc0 at ioasic0 offset 0x300000: target 7
Dec 19 01:11:40 pmax50 /netbsd: xcfb0 at tc0 slot 2 offset 0x0: 1024x768x8
Dec 19 01:11:40 pmax50 /netbsd: sfb0 at tc0 slot 0 offset 0x0: 1280x1024x8
Dec 19 01:11:40 pmax50 /netbsd: Beginning old-style SCSI device
autoconfiguration
Dec 19 01:11:40 pmax50 /netbsd: rz0 at asc0 drive 0 slave 0 DEC RZ28M    (C)
DEC rev 0744 (SCSI-2)
Dec 19 01:11:40 pmax50 /netbsd: rz0: 2007MB, 3045 cyl, 16 head, 84 sec, 512
bytes/sect x 4110480 sectors
Dec 19 01:11:40 pmax50 /netbsd: rz1 at asc0 drive 1 slave 0 QUANTUM
FIREBALL_TM2110S rev 300X (SCSI-2)
Dec 19 01:11:40 pmax50 /netbsd: rz1: 2014MB, 6810 cyl, 4 head, 151 sec, 512
bytes/sect x 4124736 sectors
Dec 19 01:11:40 pmax50 /netbsd: rz2 at asc0 drive 2 slave 0 IBM DORS-32160
rev WA0A (SCSI-2)
Dec 19 01:11:40 pmax50 /netbsd: rz2: 2063MB, 6703 cyl, 5 head, 126 sec, 512
bytes/sect x 4226725 sectors
Dec 19 01:11:40 pmax50 /netbsd: rz3 at asc0 drive 3 slave 0 DEC RZ26     (C)
DEC rev 392A (SCSI-2)
Dec 19 01:11:40 pmax50 /netbsd: rz3: 1001MB, 2570 cyl, 14 head, 57 sec, 512
bytes/sect x 2050860 sectors
Dec 19 01:11:40 pmax50 /netbsd: rz4 at asc0 drive 4 slave 0 DEC RRD43   (C)
DEC rev 0064 (SCSI-2)
Dec 19 01:11:40 pmax50 /netbsd: rz6 at asc0 drive 6 slave 0 DEC RZ57     (C)
DEC rev 5000 (SCSI-1)
Dec 19 01:11:40 pmax50 /netbsd: rz6: 954MB, 1928 cyl, 15 head, 67 sec, 512
bytes/sect x 1954050 sectors
Dec 19 01:11:40 pmax50 /netbsd: tz0 at asc0 drive 5 slave 0 DEC TLZ06
(C)DEC rev 4BQE (SCSI-2)
Dec 19 01:11:40 pmax50 /netbsd: boot device: rz0
Dec 19 01:11:40 pmax50 /netbsd: root on rz0a dumps on rz0b
Dec 19 01:11:40 pmax50 /netbsd: root file system type: ffs
--------------------------------------------------
rz1 + rz2 --> ccd0c
rz3 + rz6 --> ccd1c
  (--> ccd0+1 disk were switched off during upgrade to 1.6!!)
--------------------------------------------------
/etc/fstab of _1.5.2_ system:
/dev/rz0a / ffs rw 1 1
/dev/rz0b none swap sw 0 0
/dev/rz0d /usr ffs rw 1 2
/dev/rz0e /home ffs rw 1 2
- - - - - - - - - - - - - - - - - - -  -
/dev/ccd0a /data ffs rw 1 2
/dev/ccd1a /data2 ffs rw 1 2
- - - - - - - - - - - - - - - - - - -  -
/kern /kern kernfs rw
----------------------------------------------------
Here are the boot messages of the 1.6 kernel (booting the maxine):

Boot: 3/rz4
Loading: 3/rz4/netbsd.pmax
4412864+218748=0x46add8
Starting at 0x80030000

segment  0 start 00000000 size 02800000
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.6 (RAMDISK) #0: Mon Sep  9 03:01:25 UTC 2002

autobuild@tgm.daemon.org:/autobuild/pmax/OBJ/autobuild/src/sys/arch/pmax/com
pile/RAMDISK
Personal DECstation 5000/50 (MAXINE)
total memory = 40960 KB
avail memory = 32936 KB
using 537 buffers containing 2148 KB of memory
mainbus0 (root)
cpu0 at mainbus0: MIPS R4000 CPU (0x430) Rev. 3.0 with MIPS R4010 FPC Rev.
0.0
cpu0: 8KB/16B direct-mapped L1 Instruction cache, 48 TLB entries
cpu0: 8KB/16B direct-mapped write-back L1 Data cache
cpu0: 1024KB/32B direct-mapped write-back L2 Unified cache
tc0 at mainbus0: 12.5 MHz clock
ioasic0 at tc0 slot 3 offset 0x0
le0 at ioasic0 offset 0xc0000: address 08:00:2b:2c:41:ff
le0: 32 receive buffers, 8 transmit buffers
scc0 at ioasic0 offset 0x100000: console
mcclock0 at ioasic0 offset 0x200000: mc146818 or compatible
isdn at ioasic0 offset 0x240000 not configured
dtop0 at ioasic0 offset 0x280000
fdc at ioasic0 offset 0x2c0000 not configured
asc0 at ioasic0 offset 0x300000: NCR53C94, 25MHz, SCSI ID 7
scsibus0 at asc0: 8 targets, 8 luns per target
xcfb0 at tc0 slot 2 offset 0x0: 1024x768x8
sfb0 at tc0 slot 0 offset 0x0scsibus0: waiting 2 seconds for devices to
settle...
sd0 at scsibus0 target 0 lun 0: <DEC, RZ28M    (C) DEC, 0744> SCSI2 0/direct
fixed
sd0: 2007 MB, 3045 cyl, 16 head, 84 sec, 512 bytes/sect x 4110480 sectors
sd0: sync (200.0ns offset 15), 8-bit (5.000MB/s) transfers, tagged queueing
cd0 at scsibus0 target 4 lun 0: <DEC, RRD43   (C) DEC, 0064> SCSI2 5/cdrom
removable
cd0: sync (240.0ns offset 15), 8-bit (4.166MB/s) transfers
st0 at scsibus0 target 5 lun 0: <DEC, TLZ06     (C)DEC, 4BQE> SCSI2
1/sequential removable
st0: drive empty
st0: sync (200.0ns offset 15), 8-bit (5.000MB/s) transfers
md0: internal 3072 KB image area
boot device: cd0
root on md0a dumps on md0b
...
...
---------------------------------------------------------------------
(--> sd1/2/3/6 are switched off)
---------------------------------------------------------------------
=======================================================================

-----Ursprüngliche Nachricht-----
Von: Manuel Bouyer [mailto:bouyer@antioche.eu.org]
Gesendet: Mittwoch, 18. Dezember 2002 23:13
An: Hilmar Böhm
Cc: port-pmax@netbsd.org
Betreff: Re: pmax / NetBSD 1.5.2 to 1.6 upgrade problem


On Wed, Dec 18, 2002 at 05:02:49PM +0100, Hilmar Böhm wrote:
> Hi,
>
> I want to upgrade my DS 5000/240 from NetBSD 1.5.2 to 1.6. I. So I made
> bootable CD-ROM from the iso-Image (pmaxcd.iso).
>
> When the "Upgrade NetBSD..." option ask for the hard disk to install the
> upgrade on, I tell the programm the disk (sd1). It then says:
>
> -------------------------------------
> ...
> status: Running
> command: /sbin/fsck_ffs /dev/rsd1a
> ---------------
> ** /dev/rsd1a
> ** File systems is clean; not checking
> -------
> It appears that rz2d is not a BSD file system or the fsck was not
> successfull.
> The Upgrade has been aborted (error number -1.)

What is your rz2d line in fstab, and is it really a BSD FFS ?
If not remove it from fstab for upgrade.

--
Manuel Bouyer <bouyer@antioche.eu.org>
     NetBSD: 23 ans d'experience feront toujours la difference
--