on 1/15/00 8:14 PM, Daniel Senderowicz at daniel@synchrods.synchrods.COM
wrote:

> Hi guys,
> 
> On the same thread, maybe someone can tell me what is the
> meaning of the following console messages:
> 
>>> test
> ?TFL: 3/ni/ext-lb (3:(xmt [00000006, 00000040] cable)) [KN03-AA]
> 

  I'm fairly certain this means that you have one or more of the following:
    1.) have no transceiver / loopback connected
    2.) are using 10Base2 (BNC) and don't have it terminated properly (50
ohm t-res on both ports of a BNC T
    3.) have no link
    4.) excessive network collisions from somewhere else on the network
    5.) wrong type / resistance or bad cable.

>>> test-scc-m
> ?TFL: 3/scc/pins (2:Ln 2 strtup R-00 xptd=00 actl=20 | 4-5|) [KN03-AA]
> 
> Thanks,
> 
> Dan
> 

    scc is the serial controller, sounds like it doesn't like whatever you
have plugged into port 2. Whether port 2 is com port 2 on the back of the
unit or com port 2 the keyboard/mouse port, I couldn't tell you. I'm
guessing it is port two on the back of the unit.