I tried with partition 'd' on a few CD-roms but in all cases it
returns the message "mount_cd9660: Device not configured". It
only accepts partitions 'a' and 'c' and in both cases the same
directory tree is seen.

Dan

>on 11/23/99 7:40 PM, Daniel Senderowicz at daniel@synchrods.synchrods.COM
>wrote:
>
>> Hi Folks,
>> 
>> I'm running 1.4.1 on a 5000/240 and I have a CD-rom problem. I
>> just had a roll of film processed by Kodak and also written on a
>> CD-rom. I "mount -t cd9660 /dev/rz1a /mnt" and I can see a whole
>> tree structure with a bunch of files (mostly Kodak and Intel
>> commercials), except for the directory where my pictures are
>> supposed to be. When I read the CD-rom on a PC running Windows I
>> don't have any problems seeing that particular directory. I also
>> tried a bunch of other "mount" flags but no avail. Is that
>> something that could be related to "mount_cd9660", or a hardware
>> problem, or what? Thanks in advance.
>> 
>> Dan
>> 
>
>    Generally speaking, try mount -t cd9660 /dev/rz1c /mnt . The first two
>partitions usually won't contain anything important to you (except for ufs
>IIRC).
>
>    Chris