This mail was standing on my mail queue, and should have been posted two
week ago. The problem is still not sovlved, so if someone has an idea ...

I said:
> 
> Hello,
> I have more infos about my problem booting my DecServer 3100.
> I've made a ecoff kernel (using elf2ecoff), so i can use exactly the same
> hardware as under Ultrix (wich work fine under ultrix).
> I've got a kernel with DEBUG defined in sii.c, and sii_debug = 9. This
> appear to be a scsi problem.
> I've got two Micropolis 600 Mo at scsi 0 and 1, and a rz23 ant scsi3.
> 
> At boot, i get a lot of debug output, ending with:
> #sii_CmdDone: rz target 0 cmd 3 err 0 resid 14
> #sii_StartCmd: rz taget 0 cmd 0x0 addr 0
> #
> #sii_StartCmd DONE ds1004
> #
> #sii_StartCmd DONE ds1004
> 
> And then the kernel hangs
> If i remove my two Micropolis, i only get (with or without external scsi
> terminator)
> #Beginning old-style SCSI device autoconfiguration
> #sii_StartCmd: rz target 0 cmd 0x12 addr ffffeab8 size 1068 dma 1
> and then it hangs. 
> 
> This station has 24Mb ram installed, if this matters.
> Any idea ?
> 
> --                                         
> Manuel Bouyer, LIX, Ecole Polytechnique                                
> email: bouyer@lix.polytechnique.fr                                     
> -- 
> 

--                                         
Manuel Bouyer, LIX, Ecole Polytechnique                                
email: bouyer@lix.polytechnique.fr                                     
--