On 12/29/05, Charlie Allom <charlie@rubberduck.com> wrote:
> On Thu, Dec 29, 2005 at 01:31:42PM +0100, Dominique Goncalves wrote:
> > Hi,
> >
> > I'm trying to install NetBSD 3.0 on a Power Macintosh G3 beige.
> >
> > but the kernel hangs with:
> > scsibus0: waiting 2 seconds for devices to settle...
>
> first step: try unplugging your scsi device (zip drive?)

With the zip drive and cdrom drive unplugged , I have successfully
installed NetBSD 3.0 !
(I don't need zip or cdrom on this box)

NetBSD boot with this command:
0> boot ide1/disk@0:0

NetBSD 3.0 (GENERIC) #0: Mon Dec 19 01:25:38 UTC 2005
        builds@b2.netbsd.org:/home/builds/ab/netbsd-3-0-RELEASE/macppc/2005=
12182
                                                                     =20
                   =20
024Z-obj/home/builds/ab/netbsd-3-0-RELEASE/src/sys/arch/macppc/compile/GENE=
RIC
total memory =3D 128 MB
avail memory =3D 117 MB
mainbus0 (root)
cpu0 at mainbus0: 750 (Revision 2.2), ID 0 (primary)
cpu0: HID0 8290c0a4<EMCP,ECLK,DOZE,DPM,ICE,DCE,SGE,BTIC,BHT>
cpu0: 271.19 MHz, no-parity 512KB WB L2 cache (PB SRAM) at 2:1 ratio
grackle0 at mainbus0
pci0 at grackle0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Motorola MPC106 "Grackle" Host Bridge (rev. 0x40)
obio0 at pci0 dev 16 function 0: addr 0xf3000000
mesh0 at obio0 offset 0x10000 irq 12: 50MHz, SCSI ID 7
scsibus0 at mesh0: 8 targets, 8 luns per target
bm0 at obio0 offset 0x11000 irq 42,33: address 00:05:02:2e:d2:33
zsc0 at obio0 offset 0x13000: irq 15,16
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
davbus at obio0 offset 0x14000 not configured
swim3 at obio0 offset 0x15000 not configured
nvram0 at obio0 offset 0x60000
wdc0 at obio0 offset 0x20000 irq 13: DMA transfer
atabus0 at wdc0 channel 0
wdc1 at obio0 offset 0x21000 irq 14: DMA transfer
atabus1 at wdc1 channel 0
adb0 at obio0 offset 0x16000 irq 18: 2 targets
aed0 at adb0 addr 0: ADB Event device
akbd0 at adb0 addr 2: extended keyboard (ISO layout)
wskbd0 at akbd0: console keyboard
ams0 at adb0 addr 3: 1-button, 100 dpi mouse
wsmouse0 at ams0 mux 0
ofb0 at pci0 dev 18 function 0: ATI Technologies 3D Rage I/II
ofb0: 1024 x 768, 8bpp
wsdisplay0 at ofb0 kbdmux 1: console (std, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
Kernelized RAIDframe activated
scsibus0: waiting 2 seconds for devices to settle...
wd0 at atabus0 drive 0: <WDC AC24300L>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 4112 MB, 8912 cyl, 15 head, 63 sec, 512 bytes/sect x 8421840 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
wdc0:0:0: lost interrupt
        type: ata tc_bcount: 512 tc_skip: 0
wdc0:0:0: intr with DRQ (st=3D0x58)
wd0c: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
wd0: soft error (corrected)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs

Thanks for help!

Regards
--
There's this old saying: "Give a man a fish, feed him for a day. Teach
a man to fish, feed him for life."