Subject: Re: PowerMac 7300 won't boot 2.0 iso
To: None <port-macppc@NetBSD.org>
From: Izumi Tsutsui <tsutsui@ceres.dti.ne.jp>
List: port-macppc
Date: 12/16/2004 01:23:14
In article <Pine.NEB.4.61.0412141813140.14908@lain.ziaspace.com>
john@ziaspace.com wrote:
> ftp://ftp.ziaspace.com/pub/NetBSD/iso/NetBSD-2.0-macppc.iso
>
> I'll see if I can make a CD and boot with it if nobody else beats me to
> it.
I have not tried yours, but I've already tested modified macppccd.iso
on ftp.netbsd.org (change 0x60 to 0xe0 at offset 0x8dfe3e9 by bvi)
and it boots up on my Apus.
---
[original macppccd.iso is in the drive]
Open Firmware, 2.0
To continue booting the MacOS type:
BYE<return>
To continue booting from the default boot device type:
BOOT<return>
ok
0 > boot scsi/sd@3:0 DEFAULT CATCH!, code=FFF00300 at %SRR0: FF80AC9C %SRR1: 0000B070
[my Apus always complains at the first time on booting from scsi CD]
[CTRL-COMMAND-POWER]
Open Firmware, 2.0
To continue booting the MacOS type:
BYE<return>
To continue booting from the default boot device type:
BOOT<return>
ok
0 > boot scsi/sd@3:0 DEFAULT CATCH!, code=FFF00300 at %SRR0: 0060010C %SRR1: 00003070
ok
[original macppccd.iso doesn't boot]
0 >
[CTRL-COMMAND-POWER]
Open Firmware, 2.0
To continue booting the MacOS type:
BYE<return>
To continue booting from the default boot device type:
BOOT<return>
ok
[modified macppccd.iso in the drive]
0 > boot scsi/sd@3:0 DEFAULT CATCH!, code=FFF00300 at %SRR0: FF80AC9C %SRR1: 0000B070
[CTRL-COMMAND-POWER again]
Open Firmware, 2.0
To continue booting the MacOS type:
BYE<return>
To continue booting from the default boot device type:
BOOT<return>
ok
0 > boot scsi/sd@3:0
>> NetBSD/macppc OpenFirmware Boot, Revision 1.10
>> (builds@build, Wed Dec 1 13:46:04 UTC 2004)
open /netbsd: Device not configured
open /netbsd.gz: Device not configured
4116920+191104=0x41bec4
start=0x800000
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 2.0 (INSTALL) #0: Wed Dec 1 14:06:18 UTC 2004
builds@build:/big/builds/ab/netbsd-2-0-RELEASE/macppc/200411300000Z-obj/big/builds/ab/netbsd-2-0-RELEASE/src/sys/arch/macppc/compile/INSTALL
total memory = 65536 KB
avail memory = 58044 KB
:
---
Umm, macppc/conf/INSTALL on netbsd-2-0 still has TEXTADDR=0x800000?
---
Izumi Tsutsui
tsutsui@ceres.dti.ne.jp