Hey,

this is the dmesg output
(thanks to Michael who compiled the kernel. We are getting along a nice
debug/test team...)

- the kernel still thinks I have a 604ev processor, while my 200mhz
upgrade card can only be a 604e.
- I have left in both the digital eth. card as the video card.


-R 

autoconf.c bootpath: scsi-int/sd@1/netbsd
autoconf.c OF_canon result: /bandit@F2000000/gc@10/mesh@18000/sd@0,0
autoconf.c cbootpath: /bandit@F2000000/gc@10/mesh@18000/sd@1
mainbus0 (root)
cpu0 at mainbus0: 604ev (Revision 2.4), ID 0 (primary)
cpu0: HID0 8090c084<EMCP,DOZE,DPM,ICE,DCE,SGE,BHT>
bandit0 at mainbus0 (bootpath member) 
pci0 at bandit0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer Bandit Host-PCI Bridge (rev. 0x03)
tlp0 at pci0 dev 13 function 0: DECchip 21143 Ethernet, pass 3.0
mapping irq 17 to virq 1
tlp0: interrupting at irq 23
tlp0: Ethernet address 00:00:c5:53:0c:bf
tlp0: 21143 reset block
tlp0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ofb0 at pci0 dev 15 function 0: Matrox MGA Millennium 2064W ("Storm")
ofb0: 640 x 480, 8bpp
wsdisplay0 at ofb0 kbdmux 1: console (std, vt100 emulation)
wsmux1: connecting to wsdisplay0
obio0 at pci0 dev 16 function 0 (bootpath member) : addr 0xf3000000
esp0 at obio0 offset 0x10000 irq 12mapping irq c to virq 2
: NCR53C94, 25MHz, SCSI ID 7
scsibus0 at esp0: 8 targets, 8 luns per target
mc0 at obio0 offset 0x11000: irq 14,2,3mapping irq 2 to virq 3
mapping irq 3 to virq 4
mapping irq e to virq 5
: address 00:a0:40:22:12:c1
zsc0 at obio0 offset 0x13000: irq 15,16
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
mapping irq f to virq 6
mapping irq 10 to virq 7
awacs0 at obio0 offset 0x14000mapping irq 11 to virq 8
mapping irq 8 to virq 9
: irq 17,8,9
audio at awacs0 not configured
swim3 at obio0 offset 0x15000 not configured
adb0 at obio0 offset 0x16000 irq 18: mapping irq 12 to virq a
2 targets
aed0 at adb0 addr 0: ADB Event device
akbd0 at adb0 addr 2: extended keyboard
wskbd0 at akbd0: console keyboard, using wsdisplay0
ams0 at adb0 addr 3: 1-button, 100 dpi mouse
wsmouse0 at ams0 mux 0
mesh0 at obio0 offset 0x18000 (bootpath member)  irq 13: 50MHz, SCSI ID
7
scsibus1 at mesh0: 8 targets, 8 luns per target
mapping irq d to virq b
nvram0 at obio0 offset 0x1d000
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
probe(mesh0:0:0:0): max sync rate 10.00Mb/s
sd0 at scsibus1 target 0 lun 0: <QUANTUM, FIREBALL SE4.3S, PJ0A> disk
fixed
sd0: 4110 MB, 7637 cyl, 4 head, 275 sec, 512 bytes/sect x 8418816
sectors
probe(mesh0:0:1:0): max sync rate 10.00Mb/s
sd1 at scsibus1 target 1 lun 0: <IBM OEM, DFHSS4F, 4141> disk fixed
(bootpath member) 
sd1: drive offline
probe(mesh0:0:3:0): max sync rate 5.00Mb/s
cd0 at scsibus1 target 3 lun 0: <MATSHITA, CD-ROM CR-8005A, 4.0i> cdrom
removable
boot device: sd1
root on sd1a dumps on sd1b
root file system type: ffs