Subject: Re: Boot trouble on OF3 machine
To: None <port-macppc@netbsd.org>
From: Daniel Eggert <danieleggert@mac.com>
List: port-macppc
Date: 02/09/2004 23:36:58
OK, I messed everything up by using sysinst (the way I did on my OF1
box). Should of course have set op an HFS partition on the same disk
(to contain ofwboot.xcf) and then manually add the remaining partitions
and do a 'manual' install. Now it works and I'm trying to get XFree86
to run on my eMac...
Daniel
On 9. feb 2004, at 10:45, Daniel Eggert wrote:
> I'm unable to boot my new installation of NetBSD. I used sysinst to
> put NetBSD on the internal harddisk of my eMac (Open Firmware 3). I've
> got Mac OS X on an external FireWire disk.
>
> I can boot the ofwboot.xcf from the external fw disk, but I have no
> luck with regards to the netebsd kernel. My boot syntax for the
> boot-file is somehow wrong.
>
> > boot fw/[lost of numbers I don't remember],\ofwboot.xcf hd:2,/netbsd
>
> It gets the ofwboot.xcf loaded but says: Cannot open hd:2,/netbsd and
> ends up with a "Boot:" prompt.
>
> I also tried
>
> > boot fw/[lost of numbers I don't remember],\ofwboot.xcf
> ide0/disk@0:2,/netbsd
>
> with the same effect.
>
> Thanks in advance.
>
> Daniel
>
>
>
> Here's my output from pdisk:
>
>
> Top level command (? for help): L
> /dev/rdisk0 map block size=512
> #: type name length base (
> size )
> 1: Apple_partition_map Apple 2 @ 1
> 2: NetBSD/macppc NetBSD 2147483647 @ 4
> (1024.0G)
>
> Device block size=512, Number of Blocks=78165360
> DeviceType=0x0, DeviceId=0x0
>
> /dev/rdisk1 map block size=512
> #: type name length base (
> size )
> 1: Apple_partition_map Apple 63 @ 1
> 2: Apple_Free 0+@ 64
> 3: Apple_HFS Apple_HFS_Untitled_2 291407552 @ 262208
> (139.0G)
> 4: Apple_Free 0+@ 291669760
> 5: Apple_HFS Apple_HFS_Untitled_3 20649888 @ 291931904
> ( 9.8G)
> 6: Apple_Free 0+@ 312581792
>
> Device block size=512, Number of Blocks=312581808
> DeviceType=0x0, DeviceId=0x0
>
>