I saw an almost identical problem under NetBSD-1.6 on an i386 machine  
(Athlon XP 1400+). I had two 80GB ATA/100 Western Digital drives  
installed, and an (unused) Adaptec PCI ATA/133 controller. I bought a  
new 160 GB ATA/133 drive, plugged it into the card, and then started  
seeing exactly those messages. I wasn't sure what the problem was,  
moved stuff around, etc. Finally removed the drive and it works now.

The strange thing was that I saw those errors on various different  
drives, some of which were not plugged into the ATA/133 card, some  
which were. Intitally, it seemed like my root filesystem was corrupt,  
but finally, it seemed like the 160 GB drive was to blame (it fails on  
my OS X machine with a similar error). My CD-ROM is now plugged into  
that ATA/133 card with no problems.

I wasn't really sure how to send-pr, and was even less sure if this was  
a known error or not.

-- Erik

On Dec 22, 2003, at 9:56 PM, Cameron Kaiser wrote:

> Came back home to find this on the screen of my 7300:
>
> pciide0:0:0: lost interrupt
>         type: ata tc_bcount: 1024 tc_skip: 0
>
> ... and, naturally, it was hung up. Restarted with the  
> three-finger-salute
> and brought it back up to be greeted by this during boot:
>
> pciide0:0:0: lost interrupt
>         type: ata tc_bcount: 1024 tc_skip: 0
> pciide0:0:0: bus-master DMA error: missing interrupt, status=0x21
> wd0a: error reading fsbn 62092690 of 62092690-62092691 (wd0 bn  
> 62092690; cn 6159
> 9 tn 14 sn 16), retrying
> wd0: (uncorrectable data error)
> pciide0:0:0: lost interrupt
>         type: ata tc_bcount: 1024 tc_skip: 0
> pciide0:0:0: bus-master DMA error: missing interrupt, status=0x21
> wd0a: error reading fsbn 62092690 of 62092690-62092691 (wd0 bn  
> 62092690; cn 6159
> 9 tn 14 sn 16), retrying
> wd0: (uncorrectable data error)
> pciide0:0:0: lost interrupt
>         type: ata tc_bcount: 1024 tc_skip: 0
> pciide0:0:0: bus-master DMA error: missing interrupt, status=0x21
> wd0a: error reading fsbn 62092690 of 62092690-62092691 (wd0 bn  
> 62092690; cn 6159
> 9 tn 14 sn 16), retrying
> wd0: (uncorrectable data error)
> wd0: soft error (corrected)
>
> What happened? It seems to be fine right now. This seems suspiciously  
> similar
> to kern/18893.
>
> Any comments before I send-pr this?
>
> This machine is a Power Mac 7300 with a Sonnet G3/500 running 1.6.1  
> with
> security patches applied, with 512MB physical RAM and a Sonnet Tempo  
> Trio
> ATA/133 PCI card connected to a Western Digital 40GB ATA/100 drive.  
> dmesg
> follows. (Incidentally, I still can't get the kernel to support  
> UltraATA
> with this card, either.) Arigatoo gozaimasu.
>
> NetBSD 1.6.1 (ARCHANGEL) #2: Fri Jun 27 19:49:08 PDT 2003
>      
> loser@localhost.floodgap.com:/usr/src/sys/arch/macppc/compile/ 
> ARCHANGEL
> total memory = 512 MB
> avail memory = 464 MB
> using 2048 buffers containing 26316 KB of memory
> mainbus0 (root)
> cpu0 at mainbus0: 750 (Revision 3.0), ID 0 (primary)
> cpu0: HID0 8290c0a4<EMCP,ECLK,DOZE,DPM,ICE,DCE,SGE,BTIC,BHT>
> cpu0: 500.00 MHz
> cpu0: 1MB backside cache
> bandit0 at mainbus0
> pci0 at bandit0 bus 0
> pci0: i/o space, memory space enabled
> pchb0 at pci0 dev 11 function 0
> pchb0: Apple Computer Bandit Host-PCI Bridge (rev. 0x03)
> rtk0 at pci0 dev 13 function 0: D-Link Systems DFE 530TX+
> rtk0: interrupting at irq 23
> rtk0: Ethernet address 00:40:05:0a:d7:93
> ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
> ukphy0: OUI 0x000000, model 0x0000, rev. 0
> ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> ppb0 at pci0 dev 15 function 0: unknown vendor 0x1668 product 0x0100  
> (rev. 0x11)
> pci1 at ppb0 bus 1
> pci1: i/o space, memory space enabled
> ohci0 at pci1 dev 0 function 0: NEC USB Host Controller (rev. 0x41)
> ohci0: interrupting at irq 25
> ohci0: OHCI version 1.0
> usb0 at ohci0: USB revision 1.0
> uhub0 at usb0
> uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 3 ports with 3 removable, self powered
> ohci1 at pci1 dev 0 function 1: NEC USB Host Controller (rev. 0x41)
> ohci1: interrupting at irq 25
> ohci1: OHCI version 1.0
> usb1 at ohci1: USB revision 1.0
> uhub1 at usb1
> uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> NEC USB Host Controller (USB serial bus, interface 0x20, revision  
> 0x02) at pci1 dev 0 function 2 not configured
> fwohci0 at pci1 dev 1 function 0: Lucent Technologies product 0x5811  
> (rev. 0x04)
> fwohci0: interrupting at irq 25
> fwohci0: OHCI 1.0, 00:30:93:01:00:00:01:34, 400Mb/s, 1024 max_rec, 8  
> iso_ctx
> pciide0 at pci1 dev 2 function 0: Promise Ultra133/ATA Bus Master IDE  
> Accelerator (rev. 0x02)
> pciide0: bus-master DMA support present
> pciide0: primary channel configured to native-PCI mode
> pciide0: using irq 25 for native-PCI interrupt
> wd0 at pciide0 channel 0 drive 0: <WDC WD400JB-00ENA0>
> wd0: drive supports 16-sector PIO transfers, LBA addressing
> wd0: 38166 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 78165360  
> sectors
> wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5  
> (Ultra/100)
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100)  
> (using DMA data transfers)
> pciide0: secondary channel configured to native-PCI mode
> obio0 at pci0 dev 16 function 0: addr 0xf3000000
> esp0 at obio0 offset 0x10000 irq 12: NCR53C94, 25MHz, SCSI ID 7
> scsibus0 at esp0: 8 targets, 8 luns per target
> mc0 at obio0 offset 0x11000: irq 14,2,3: address 00:05:02:a8:e4:22
> zsc0 at obio0 offset 0x13000: irq 15,16
> zstty0 at zsc0 channel 0
> zstty1 at zsc0 channel 1
> awacs at obio0 offset 0x14000 not configured
> swim3 at obio0 offset 0x15000 not configured
> adb0 at obio0 offset 0x16000 irq 18: 1 targets
> aed0 at adb0 addr 0: ADB Event device
> akbd0 at adb0 addr 2: extended keyboard
> wskbd0 at akbd0: console keyboard
> mesh0 at obio0 offset 0x18000 irq 13: 50MHz, SCSI ID 7
> scsibus1 at mesh0: 8 targets, 8 luns per target
> nvram0 at obio0 offset 0x1d000
> bandit1 at mainbus0
> pci2 at bandit1 bus 2
> pci2: i/o space, memory space enabled
> ofb0 at pci2 dev 11 function 0: Apple Computer Control
> ofb0: 640 x 480, 8bpp
> wsdisplay0 at ofb0 kbdmux 1: console (std, vt100 emulation), using  
> wskbd0
> wsmux1: connecting to wsdisplay0
> scsibus0: waiting 2 seconds for devices to settle...
> cd0 at scsibus0 target 4 lun 0: <MATSHITA, CD-ROM CR-8012, 1.0f> SCSI2  
> 5/cdrom removable
> cd0: sync (200.0ns offset 8), 8-bit (5.000MB/s) transfers
> scsibus1: waiting 2 seconds for devices to settle...
> fw0 at fwohci0: 00:30:93:01:00:00:01:34:09:02:20:00:00:00:00:00
> boot device: <unknown>
> root on wd0a dumps on wd0b
> wd0: transfer error, downgrading to Ultra-DMA mode 2
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using  
> DMA data transfers)
> wd0c: error reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
> wd0: (aborted command, interface CRC error)
> wd0: soft error (corrected)
> pciide0:0:0: lost interrupt
>         type: ata tc_bcount: 1024 tc_skip: 0
> pciide0:0:0: bus-master DMA error: missing interrupt, status=0x21
> wd0a: error reading fsbn 62092690 of 62092690-62092691 (wd0 bn  
> 62092690; cn 61599 tn 14 sn 16), retrying
> wd0: (uncorrectable data error)
> pciide0:0:0: lost interrupt
>         type: ata tc_bcount: 1024 tc_skip: 0
> pciide0:0:0: bus-master DMA error: missing interrupt, status=0x21
> wd0a: error reading fsbn 62092690 of 62092690-62092691 (wd0 bn  
> 62092690; cn 61599 tn 14 sn 16), retrying
> wd0: (uncorrectable data error)
> pciide0:0:0: lost interrupt
>         type: ata tc_bcount: 1024 tc_skip: 0
> pciide0:0:0: bus-master DMA error: missing interrupt, status=0x21
> wd0a: error reading fsbn 62092690 of 62092690-62092691 (wd0 bn  
> 62092690; cn 61599 tn 14 sn 16), retrying
> wd0: (uncorrectable data error)
> wd0: soft error (corrected)
>
> -- 
> ---------------------------------- personal:  
> http://www.armory.com/~spectre/ --
>  Cameron Kaiser, Floodgap Systems Ltd * So. Calif., USA *  
> ckaiser@floodgap.com
> -- BOND THEME NOW PLAYING: "A View To A Kill"  
> ---------------------------------