On Monday, March 31, 2003, at 03:39 PM, Jeff Hergan wrote:

> I have never used NetBSD and PCMCIA or cardbus cards before.
> I've searched for info, but I can't seem to find much.
> Anyway, I have a Powerbook G3 Series 266mhz and a D Link DFE-690TXD  
> ethernet Cardbus ethernet adapter.
> Anyone know if this works?  Is there something like linux's cardmgr  
> for NetBSD?
> I'm not sure where to begin...except that I have plugged in the card.
>
> Thanks,
> Jeff
>
>

Still trying to get this card working.  I've tried booting with the  
card inserted, and I've tried adding the card after it is booted, but  
neither seems to work.  Using NetBSD 1.6 on a Powerbook G3 Series  
266mhz with 512mb ram.
Any thoughts on what I need to do to get this cardbus card working?

Thanks for any help.

Here is the output to my dmesg:

NetBSD 1.6 (GENERIC) #0: Sun Sep  8 22:04:33 UTC 2002
      
autobuild@tgm.daemon.org:/autobuild/macppc/OBJ/autobuild/src/sys/arch/ 
macppc/compile/GENERIC
total memory = 512 MB
avail memory = 464 MB
using 2048 buffers containing 26316 KB of memory
mainbus0 (root)
cpu0 at mainbus0: 750 (Revision 2.2), ID 0 (primary)
cpu0: HID0 8290c0a4<EMCP,ECLK,DOZE,DPM,ICE,DCE,SGE,BTIC,BHT>
cpu0: 266.67 MHz
cpu0: 1MB backside cache
grackle0 at mainbus0
pci0 at grackle0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Motorola MPC106 "Grackle" Host Bridge (rev. 0x40)
obio0 at pci0 dev 13 function 0: addr 0xf3000000
mesh0 at obio0 offset 0x10000 irq 12: 50MHz, SCSI ID 7
scsibus0 at mesh0: 8 targets, 8 luns per target
zsc0 at obio0 offset 0x13000: irq 15,16
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
bm0 at obio0 offset 0x11000 irq 42,33: address 00:05:02:7c:fd:fb
davbus at obio0 offset 0x14000 not configured
mediabay0 at obio0 offset 0x34 irq 29 level-triggered
wdc0 at mediabay0 offset 0x21000 irq 14
atapibus0 at wdc0 channel 0: 2 targets
cd0 at atapibus0 drive 0: <MATSHITA CR-174, , A011> type 5 cdrom  
removable
cd0: drive supports PIO mode 4, DMA mode 2
cd0(wdc0:0:0): using PIO mode 4
wdc1 at obio0 offset 0x20000 irq 13: DMA transfer
wd0 at wdc1 channel 0 drive 0: <IBM-DJSA-220>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 19077 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 39070080  
sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0(wdc1:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
adb0 at obio0 offset 0x16000 irq 18: 3 targets
aed0 at adb0 addr 0: ADB Event device
akbd0 at adb0 addr 2: PowerBook G3 keyboard
wskbd0 at akbd0: console keyboard
ams0 at adb0 addr 3: EMP trackpad <tpad> 2-button, 400 dpi
wsmouse0 at ams0 mux 0
abtn0 at adb0 addr 7: brightness/volume button
Apple Computer MAC-IO I/O Controller (Paddington) (undefined subclass  
0x00) at pci0 dev 16 function 0 not configured
ofb0 at pci0 dev 17 function 0: ATI Technologies 3D Rage LT Pro
ofb0: 1024 x 768, 8bpp
wsdisplay0 at ofb0 kbdmux 1: console (std, vt100 emulation), using  
wskbd0
wsmux1: connecting to wsdisplay0
cbb0 at pci0 dev 19 function 0: Texas Instruments PCI1131 PCI-CardBus  
Bridge (rev. 0x01)
cbb1 at pci0 dev 19 function 1: Texas Instruments PCI1131 PCI-CardBus  
Bridge (rev. 0x01)
cbb0: interrupting at irq 22
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 0 device 0
pcmcia0 at cardslot0
cbb1: interrupting at irq 23
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 0 device 0
pcmcia1 at cardslot1
scsibus0: waiting 2 seconds for devices to settle...
  Motorola MPC106 "Grackle" Host Bridge (host bridge, revision 0x40) at  
cardbus1 dev 0 function 0 not configured
boot device: <unknown>
root device: wd0a
dump device (default wd0b):
file system (default generic):
root on wd0a dumps on wd0b
root file system type: ffs
syncing disks... 1 1 done
rebooting



And here is the output of ifconfig -a

bm0: flags=8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST> mtu  
1500
	address: 00:05:02:7c:fd:fb
	media: Ethernet 10baseT (none)
	inet 192.168.2.2 netmask 0xffffff00 broadcast 192.168.2.255
	inet6 fe80::205:2ff:fe7c:fdfb%bm0 prefixlen 64 scopeid 0x1
lo0: flags=8009<UP,LOOPBACK,MULTICAST> mtu 33220
	inet 127.0.0.1 netmask 0xff000000
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
	inet6 ::1 prefixlen 128
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
ppp1: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 296
sl1: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 296