--- Matthew Jacob <mjacob@feral.com> wrote:
> 
> try going to /dev and doing
> 
> ./MAKEDEV sd3
> 
> 
> also, you want 'disklabel -t sd3'
> 

TNX 
i have made this
# cd    /dev
# ./MAKEDEV  sd3
bla-bla-bla with disklabel 
#mount  -va
succesfully added  new hdd sd3
but  when i try  add another  hdd's- sd4 , sd5

# ./MAKEDEV  sd4
#disklabel sd4 > foo
i got :
sd4: no disk label -- NetBSD or Macintosh
Jun 28 22:24:56 
disklabel: boot block size 0
disklabel: super block size 0

whats happen?!


> 
> On Thu, 27 Jun 2002, kady ru wrote:
> 
> > dear all
> > its me again
> > upgraded to netbsd 1.6 curently
> > 
> > from dmesg
> > sd0 at scsibus1 target 1 lun 0: <IBM,
> > IC35L036UWD210-0, S5BS> SCSI3 0/direct fix
> > ed
> > sd0: 35003 MB, 20765 cyl, 6 head, 575 sec, 512
> > bytes/sect x 71687340 sectors
> > sd0: sync (100.0ns offset 8), 16-bit (20.000MB/s)
> > transfers, tagged queueing
> > sd1 at scsibus1 target 2 lun 0: <SEAGATE,
> > ST15150W_APL, 9503> SCSI2 0/direct fix
> > ed
> > sd1: 4095 MB, 3712 cyl, 21 head, 107 sec, 512
> > bytes/sect x 8388315 sectors
> > sd1: sync (100.0ns offset 8), 16-bit (20.000MB/s)
> > transfers, tagged queueing
> > sd2 at scsibus1 target 3 lun 0: <SEAGATE,
> > ST15150W_APL, 9503> SCSI2 0/direct fix
> > ed
> > sd2: 4095 MB, 3712 cyl, 21 head, 107 sec, 512
> > bytes/sect x 8388315 sectors
> > sd2: sync (100.0ns offset 8), 16-bit (20.000MB/s)
> > transfers, tagged queueing
> > scsibus2: waiting 2 seconds for devices to
> settle...
> > sd3 at scsibus2 target 4 lun 0: <SEAGATE,
> > ST15150W_APL, 9503> SCSI2 0/direct fix
> > ed
> > sd3: 4095 MB, 3712 cyl, 21 head, 107 sec, 512
> > bytes/sect x 8388315 sectors
> > sd3: sync (100.0ns offset 8), 16-bit (20.000MB/s)
> > transfers, tagged queueing
> > sd4 at scsibus2 target 5 lun 0: <SEAGATE,
> > ST15150W_APL, 9503> SCSI2 0/direct fix
> > ed
> > sd4: 4095 MB, 3712 cyl, 21 head, 107 sec, 512
> > bytes/sect x 8388315 sectors
> > sd4: sync (100.0ns offset 8), 16-bit (20.000MB/s)
> > transfers, tagged queueing
> > sd5 at scsibus2 target 6 lun 0: <SEAGATE,
> > ST15150W_APL, 9503> SCSI2 0/direct fix
> > ed
> > sd5: 4095 MB, 3712 cyl, 21 head, 107 sec, 512
> > bytes/sect x 8388315 sectors
> > sd5: sync (100.0ns offset 8), 16-bit (20.000MB/s)
> > transfers, tagged queueing
> > boot device: sd0
> > 
> > i have succesfully added by disklabel sd1 and sd2
> > but when i try add sd3 sd4 sd5 :
> > 
> > # disklabel sd3 > foo
> > disklabel: /dev/rsd3c: No such file or directory
> > 
> > how i can do this?!
> > 
> > __________________________________________________
> > Do You Yahoo!?
> > Yahoo! - Official partner of 2002 FIFA World Cup
> > http://fifaworldcup.yahoo.com
> > 
> 


__________________________________________________
Do You Yahoo!?
Yahoo! - Official partner of 2002 FIFA World Cup
http://fifaworldcup.yahoo.com