In article <20020613191307.A16930@antioche.lip6.fr>
bouyer@antioche.lip6.fr wrote:

> > Or, try a VERY -current kernel. Make sure you have version 1.17 of
> > sys/arch/powerpc/mpc6xx/cpu_subr.c. It adds specific cache support for the
> > 603ev CPU.
> 
> Sorry, this doesn't help for me.

My Apus2000 (with 603ev and 16M RAM) works fine (with serial console),
so the problem should not be CPU related. (but OF problem?)
---
Izumi Tsutsui
tsutsui@ceres.dti.ne.jp

---
Open Firmware, 2.0
To continue booting the MacOS type:
BYE<return>
To continue booting from the default boot device type:
BOOT<return>
 ok
0 > printenv 

little-endian?      false               false
real-mode?          false               false
auto-boot?          false               true
diag-switch?        false               false
fcode-debug?        false               false
oem-banner?         false               false
oem-logo?           false               false
use-nvramrc?        false               false
real-base           F00000              -1 
real-size           100000              100000 
virt-base           -1                  -1 
virt-size           100000              100000 
load-base           4000                4000 
pci-probe-list      -1                  -1 
screen-#columns     64                  64 
screen-#rows        28                  28 
selftest-#megs      0                   0 
boot-device         ata/ATA-Disk@0:0    /AAPL,ROM
boot-file                               
diag-device         fd:diags            fd:diags
diag-file                               
input-device        ttya                ttya
output-device       ttya                ttya
oem-banner                              
oem-logo                                
nvramrc                                 
boot-command        boot                boot
 ok
0 > boot fd:0 -
OF_open bootpath=fd
read stage 2 blocks: 01234567. done!
starting stage 2...

>> NetBSD/macppc OpenFirmware Boot, Revision 1.6
>> (autobuild@tgm.daemon.org, Wed Jun 12 20:42:04 UTC 2002)
3718784+128844=0x3ab7e0
 start=0x800000
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.6_BETA2 (INSTALL) #0: Wed Jun 12 20:55:38 UTC 2002
    autobuild@tgm.daemon.org:/autobuild/macppc/OBJ/autobuild/src/sys/arch/macppc/compile/INSTALL
total memory = 16384 KB
avail memory = 9948 KB
using 230 buffers containing 920 KB of memory
no active packagemainbus0 (root)
cpu0 at mainbus0: 603ev (Revision 2.1), ID 0 (primary)
cpu0: HID0 90c001<DOZE,DPM,ICE,DCE,NOPTI>
cpu0: ohare L2 cache enabled
bandit0 at mainbus0
pci0 at bandit0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: vendor 0x106b product 0x0008 (rev. 0x02)
vendor 0x1195 product 0x0853 (SCSI mass storage, revision 0x01) at pci0 dev 13 function 0 not configured
epic0 at pci0 dev 14 function 0: SMC 83c170 Fast Ethernet, rev. 6
epic0: interrupting at irq 25
epic0: SMC9432TX, Ethernet address 00:e0:29:1a:b1:ab
qsphy0 at epic0 phy 3: QS6612 10/100 media interface, rev. 1
qsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
obio0 at pci0 dev 16 function 0: addr 0xf3000000
mesh0 at obio0 offset 0x10000 irq 12: 50MHz, SCSI ID 7
scsibus0 at mesh0: 8 targets, 8 luns per target
zsc0 at obio0 offset 0x13000: irq 15,16
zstty0 at zsc0 channel 0 (console)
zstty1 at zsc0 channel 1
awacs at obio0 offset 0x14000 not configured
swim3 at obio0 offset 0x15000 not configured
nvram0 at obio0 offset 0x60000
adb0 at obio0 offset 0x16000 irq 18: 1 targets
akbd0 at adb0 addr 2: extended keyboard
wskbd0 at akbd0 (mux ignored)
wdc0 at obio0 offset 0x20000 irq property not found; using 13: DMA transfer
wd0 at wdc0 channel 0 drive 0: <Maxtor 82160D2>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 2014 MB, 4092 cyl, 16 head, 63 sec, 512 bytes/sect x 4124736 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
conf[0] = 0x11823, cyc = 4 (120 ns), act = 3 (75 ns), inact = 1
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
scsibus0: waiting 2 seconds for devices to settle...
cd0 at scsibus0 target 3 lun 0: <MATSHITA, CD-ROM CR-506, 8S05> SCSI2 5/cdrom removable
md0: internal 2048 KB image area
boot device: <unknown>
root on md0a dumps on md0b
root file system type: ffs
erase ^H, werase ^W, kill ^U, intr ^C, status ^T
Terminal type? [vt100]