I have tried to install 1.5.1 on an AWS700.
But on a certain point the screen blacks out and the machine reboots.
Via the serial I could see the output that I pasted below.

I tried via floppy as well as with a cd.
The screen blacks out likes you write in screenmem ( line by line ) so I
also tried to change the real-base ( like I found in the FAQs ) but no go
....

Anyone a hint? What is he doing by testing ifmedia_set ?

-marc-


0 > printenv
security-#badlogins 0
security-password
security-mode       none

little-endian?      false               false
real-mode?          false               true
auto-boot?          true                true
diag-switch?        false               false
fcode-debug?        false               false
oem-banner?         false               false
oem-logo?           false               false
use-nvramrc?        false               false
f-segment?          true                true
real-base           F00000              -1
real-size           100000              100000
virt-base           -1                  -1
virt-size           100000              100000
load-base           600000              4000
pci-probe-list      -1                  -1
screen-#columns     64                  64
screen-#rows        28                  28
selftest-#megs      0                   0
boot-device         disk2:aix           disk2:aix
boot-file
diag-device         cd fd:diags         cd fd:diags
diag-file
input-device        ttya                kbd
output-device       ttya                screen
oem-banner
oem-logo
nvramrc
boot-command        boot                boot
 ok
0 > boot fd:0
fd:0  -
>> NetBSD/macppc OpenFirmware Boot, Revision 1.2
>> (matt@duel.local, Mon Jun 18 08:12:39 PDT 2001)
3716244+153080=0x3b0d2c
 start=0x800000
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.5.1 (INSTALL) #9: Mon Jul  2 08:59:37 PDT 2001
    matt@duel.local:/u1/kobj/INSTALL
CPU: 604 (Revision 303)
total memory = 65536 KB
avail memory = 55152 KB
using 844 buffers containing 3376 KB of memory
mainbus0 (root)
cpu0 at mainbus0bandit0 at mainbus0
pci0 at bandit0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: vendor 0x106b product 0x0001 (rev. 0x03)
ofb0 at pci0 dev 15 function 0: vendor 0x1013 product 0x00a0
ofb0: 640 x 480, 8bpp
wsdisplay0 at ofb0
obio0 at pci0 dev 16 function 0: addr 0xf3000000
esp0 at obio0 offset 0x10000 irq 12: NCR53C94, 25MHz, SCSI ID 7
scsibus0 at esp0: 8 targets, 8 luns per target
mc0 at obio0 offset 0x11000: irq 14,2,3: address 00:a0:40:2a:c5:b7
zsc0 at obio0 offset 0x13000: irq 15,16
zstty0 at zsc0 channel 0 (console)
zstty1 at zsc0 channel 1
awacs at obio0 offset 0x14000 not configured
swim3 at obio0 offset 0x15000 not configured
adb0 at obio0 offset 0x16000 irq 18: 2 targets
akbd0 at adb0 addr 2: extended keyboard (ISO layout)
wskbd0 at akbd0
adb0 addr 3: relative positioning device (1) not configured
nvram0 at obio0 offset 0x1d000
lcd at obio0 offset 0x1c000 not configured
siop0 at pci0 dev 17 function 0: Symbios Logic 53c825a (fast wide scsi)
siop0: using on-board RAM
siop0: interrupting at irq 22
scsibus1 at siop0: 16 targets, 8 luns per target
siop1 at pci0 dev 18 function 0: Symbios Logic 53c825a (fast wide scsi)
siop1: using on-board RAM
siop1: interrupting at irq 26
scsibus2 at siop1: 16 targets, 8 luns per target
bandit1 at mainbus0
pci1 at bandit1 bus 1
pci1: i/o space, memory space enabled
pchb1 at pci1 dev 11 function 0
pchb1: vendor 0x106b product 0x0001 (rev. 0x03)
tlp0 at pci1 dev 14 function 0: DECchip 21041 Ethernet, pass 1.1
tlp0: interrupting at irq 27
tlp0: Ethernet address 00:05:02:3d:17:49
ifmedia_set: no match for 0x23/0xffffffff
panic: ifmedia_set
rebooting