Sound and booting from PCMCIA devices?  Those are the two I think are it.

Grant


>>Are there any devices on the original G3/400 powerbook that are _not_
>>supported yet?
>
>my dmesg is:
>(w/ Hayakawa-san's cardbus patch - it now supports macppc)
>
>NetBSD 1.4I (CARDBUS) #11: Wed Aug  4 18:13:44 JST 1999
>    tsubai@asuka:/a/0731/src/sys/arch/macppc/compile/CARDBUS
>CPU: 750 (Revision 8202)
>total memory = 65536 KB
>avail memory = 50652 KB
>using 2048 buffers containing 8192 KB of memory
>mainbus0 (root)
>cpu0 at mainbus0: 1MB backside cache enabled
>pci0 at mainbus0 bus 0
>pci0: i/o enabled, memory enabled
>pchb0 at pci0 dev 0 function 0
>pchb0: Motorola MPC106 Host-PCI Bridge (grackle) (rev. 0x40)
>ohci0 at pci0 dev 14 function 0: AT&T Microelectronics USB Host Controller
>(rev. 0x12)
>ohci0: interrupting at irq 28
>ohci0: OHCI version 1.0
>usb0 at ohci0
>uhub0 at usb0
>uhub0: AT&T Microelect OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub0: 2 ports with 2 removable, self powered
>uhub0: port 1 did not power up
>uhub0: port 2 did not power up
>C-Cube Microsystems Cinemaster C 3.0 DVD Decoder (miscellaneous
>multimedia, revision 0x02) at pci0 dev 15 function 0 not configured
>obio0 at pci0 dev 16 function 0: addr 0x80800000
>interrupt-controller at obio0 offset 0x10 not configured
>escc-legacy at obio0 offset 0x12000 not configured
>zsc0 at obio0 offset 0x13000: irq 15,16
>zstty0 at zsc0 channel 0
>zstty1 at zsc0 channel 1
>davbus at obio0 offset 0x14000 not configured
>power-mgt at obio0 offset 0x0 not configured
>adb0 at obio0 offset 0x16000 irq 18: 3 targets
>aed0 at adb0 addr 0: ADB Event device
>akbd0 at adb0 addr 2: PowerBook G3 keyboard (Japanese layout)
>wskbd0 at akbd0: console keyboard
>ams0 at adb0 addr 3: EMP trackpad <tpad> 2-button, 400 dpi
>wsmouse0 at ams0
>abtn0 at adb0 addr 7: brightness/volume button
>wdc0 at obio0 offset 0x20000 irq 13: DMA transfer
>wd0 at wdc0 channel 0 drive 0: <IBM-DADA-26480>
>wd0: drive supports 16-sector pio transfers, lba addressing
>wd0: 6194MB, 13424 cyl, 15 head, 63 sec, 512 bytes/sect x 12685680 sectors
>wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
>mediabay0 at obio0 offset 0x34 irq 29
>fdc at mediabay0 offset 0x15000 not configured
>wdc1 at mediabay0 offset 0x21000 irq 14
>atapibus0 at wdc1 channel 0
>cd0 at atapibus0 drive 0: <MATSHITADVD-ROM SR-8171, , 080E> type 5 cdrom
>removable
>cd0: drive supports PIO mode 4, DMA mode 2
>scsi at obio0 offset 0x10000 not configured
>bm0 at obio0 offset 0x11000 irq 42,33: address 00:50:e4:3a:fe:17
>ofb0 at pci0 dev 17 function 0: ATI Technologies Mach64 LI
>ofb0: 1024 x 768, 8bpp
>wsdisplay0 at ofb0: console (std, vt100 emulation), using wskbd0
>cbb0 at pci0 dev 19 function 0 (TI1211), flags 3
>cbb0: interrupting at irq 22
>cardbus0 at cbb0 bus 1 device 0
>pcmcia0 at cbb0 slot 0
>cbb0: a 16-bit pcmcia card found.
>com0 at pcmcia0 function 0: serial device
>com0: ns16550a, working fifo
>boot device: wd0
>root on wd0a dumps on wd0b
>root file system type: ffs
>...