Hello!
Networking Wizards

I could dial-up connect(PAP) into ISP.

but I left several problems.
Please let me know.

my connection
IIci/MacBSD 1.3.2(modem port/8pins)----serial cable----(serial
port/25pins)USRobotics Sportster 28800---telephone

1)Which is better, crtscts or cdtrcts in /etc/ppp/options file?

2)Which is "38400", the speed between local PC and local modem or the speed
between local modem and remote modem
on /usr/sbin/pppd /dev/tty00 38400 connect 
in /etc/ppp/ppp-up file(my dial-up script file name)?

3)how do I wrote on line tty00 in my /etc/ttys file.
I wrote-- tty00   "/usr/libexec/getty std.38400"  dialup
and
Which is "38400", the speed between local PC and local modem or the speed
between local modem and remote modem? 

and
I can connect with
tty00 ------ ether dialup or unknown ------ ether off or "none"
Which combination is better?

4)What is distinction?
dial-up modem and dial-in modem and dial-out modem

5)Booter Options-Serial ports-Default Serial Speed setting is required for
dial-up?
Which is this speed, the speed between local PC and local modem or the
speed between local modem and remote modem?  

6)While connecting I often see
zstty0: x silo overflows, 0 ibuf floods
Why?
do I have to recompile kernel 
options "SERIBUF_SIZE=4096"
options "SEROBUF_SIZE=32"
not to see this problem?

according to
http://rfhs8012.fh-regensburg.de/~feyrer/NetBSD/NWF/nwf_68.html#SEC68

7)I wrote  "kdebug 1" in my /etc/options file.
so,
While connecting I often see
ppp0: bad fcs 7c6a
ppp0: bad protocol 820
what this means?

8)do anyone have terminal for MacBSD which be able to use AT commnads in
order to communicat modem?

best regards,

mailto:tutiya03@tky2.3web.ne.jp
http://www2.tky.3web.ne.jp/~tutiya03/

-tsuchiya
-------------------------------------
-Tsuchiya,Yukikazu
-mailto:tutiya03@tky2.3web.ne.jp
-http://www2.tky.3web.ne.jp/~tutiya03/
-------------------------------------