I tried from the macos location I got the same result one with the single
user option on and extra debugging
the other one with only extra debugging

the mac will just freeze after the last message
 ( could it be the new driver from HD toolkit ? ) shall I use again the one
on apple HD setup ?

Logging to bootlog
Booting...MID_M68K executable: entry 0x3382.
795000+58612+95560+152796+139386

Set _boothowto to 0x2.
  Bye-bye...
        So I sez to him...  The real way
        that it should be done is to...
Env: "ROOT_SCSI_ID" set to 0 (0x0).
Env: "SINGLE_USER" set to 2 (0x2).
Env: "VIDEO_ADDR" set to 1343227392 (0x50100600).
Env: "ROW_BYTES" set to 1280 (0x500).
Env: "FLAGS" set to -2147349262 (0x80020cf2).
Env: "SCREEN_DEPTH" set to 16 (0x10).
Env: "DIMENSIONS" set to 31457920 (0x1e00280).
Env: "BOOTTIME" set to 847116685 (0x327df98d).
Env: "GMTBIAS" set to 0 (0x0).
Env: "BOOTERVER" set to 108 (0x6c).
Env: "MACOS_VIDEO" set to 1343227392 (0x50100600).
Env: "MACOS_SCC" set to 1357922304 (0x50f04000).
Env: "MACHINEID" set to 60 (0x3c).
Env: "MEMSIZE" set to 24 (0x18).
Env: "GRAYBARS" set to 1 (0x1).
Env: "SERIALECHO" set to 0 (0x0).
Env: "SERIALCONSOLE" set to 0 (0x0).
Env: "SERIAL_MODEM_FLAGS" set to 0 (0x0).
Env: "SERIAL_MODEM_HSKICLK" set to 0 (0x0).
Env: "SERIAL_MODEM_GPICLK" set to 0 (0x0).
Env: "SERIAL_PRINT_FLAGS" set to 0 (0x0).
Env: "SERIAL_PRINT_HSKICLK" set to 0 (0x0).
Env: "SERIAL_PRINT_GPICLK" set to 0 (0x0).
Env: "PROCESSOR" set to 2 (0x2).
Env: "END_SYM" set to 1249174 (0x130f96).
Env: "ROMBASE" set to 1082130432 (0x40800000).
Env: "TIMEDBRA" set to 6255 (0x186f).
Env: "ADBDELAY" set to 510 (0x1fe).
Env: "HWCFGFLAGS" set to -1024 (0xfffffc00).
Env: "HWCFGFLAG2" set to 1224738847 (0x4900081f).
Env: "HWCFGFLAG3" set to 587251494 (0x2300bf26).
Env: "ADBREINIT_JTBL" set to 1082213304 (0x408143b8).

Set _mac68k_vrsrc_cnt to 0.