On 9/30/96 at 10:38 AM -0700, John P. Wittkoski wrote:

> Please let me know if you have any luck getting past
> that point with any other Powerbook models.

You probably expected this with Takashi Hamada's code, but it works on a
PB540 (of course, the FPU emulation problem still exists...sigh.)

I copied all this down on paper, because I can't get the serial console to
work, so please forgive any typos.

NetBSD 1.2 (ADBTEST) #160: Sun Sep 29 21:02:32 EDT 1996
	root@daedalus.netwizards.net:/usr/src/sys/arch/mac68k/compile/ADBTEST
Apple Macintosh PowerBook 500 (68040)
real mem = 12582912
avail mem = 9342976
using 179 buffers containing 733184 bytes of memory
mrg: '68040 PowerBook ROMs' ROM glue, tracing off, debug off, silent traps
adb: bus subsystem
Got following HwCfgFlags: 0xed00, 0xc0805f3f, 0x   3bf12, 0x       0
mrg: skipping egret setup
adb: calling ADBReInit
adb: using PowerBook 500-series hardware support
adb: cleanup: nothign returned
adb: ADBReInit complete
adb: mapped device (24) at 2
adb: extended mouse <tpad> 2-button 387 dpi unknown device at 3
mainbus0 (root)
obio0 at mainbus0
adb0 at obio0 (ADB event device)
asc0 at obio0 Apple sound chip.
ite0 at obio0 (minimal console)
sbc0 at obio0: options = 1 <PDMA>
scsibus0 at sbc0
sd0 at scsibus0 targ 0 lun 0: <IBM, H2258-S3C, S690> SCSI1 0/direct fixed
sd0: 246MB, 2262 cyl, 3 head, 74 sec, 512 bytes/sec
sd1 at scsibus0 targ 1 lun 0: <QUANTUM, LPS540S, 5900> SCSI2 0/direct fixed
sd1: 516MB, 2740 cyl, 4 head, 96 sec, 512 bytes/sec
cd0 at scsibus0 targ 3 lun 0: <NEC, CD-ROM DRIVE:841, 1, 0> SCSI2 5/cdrom
removable
sd2 at scsibus0 targ 4 lun 0: <QUANTUM, LP240S GM240S01X, 6.4> SCSI2
0/direct fixed
sd2: 234MB, 1818 cyl, 4 head, 65 sec, 512 bytes/sec
st0 at scsibus0 targ 6 lun 0: <SONY, SDT-5200, 3.26> SCSI2 1/sequential
removable
st0: drive empty
zsc0 at obio0 chip type 0
zstty0 at zsc0 channel 0 (raw defaults)
zstty1 at zsc0 channel 1 (raw defaults)
fpu0 at obio0 (emulator)
nubus0 at mainbus0
Changing root device to sd2a.
PRAM time does not appear to have been read correctly.
PRAM: 0x83da4f80, macos_boottime: 0x325030b0.
Enter pathname of shell or RETURN for sh:
Illegal instruction
# ls
Illegal instruction
# echo "hello"
hello
# su sabi
% cat /etc/myname [at least csh works! :)]
roadrunner.tiac.net
% more /etc/motd
Illegal instruction
# # # # # [keyboard no longer echoes chars, CR appears not to work]
# exit
[...can get keyboard echo back after multiuser start aborts from read-only
 filesystem]
# Panic switch: PC is 0x3678
Stopped at      _Debuuger: +0x6: unlk   a6

I also have a PB160 (now) and 180c (will be back tomorrow night) to try
out, if you want... I didn't try the 160 because of your lack of success.
The other two PBs are not mine, though the 540 is--and I would love to run
NetBSD on it eventually :-).

<sabi

 _____________________________________________________
|Nicholas Riley  |             nriley@cs.brandeis.edu |
|nriley@tiac.net | nriley@staff.feldberg.brandeis.edu |
|________________|_<http://www.tiac.net/users/nriley/>|