--Boundary-00=_jYtRHtUqYRipjIj
Content-Type: text/plain;
  charset="us-ascii"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

NetBSD 4.0_RC4 (GENERIC.MP)
SuperMicro 1011M-T2
http://www.supermicro.com/Aplus/system/1U/1011/AS-1011M-T2.cfm
dmesg output attached.

The pci busses attached to ppb1 all show "no spaces enabled!". 

The same problem occurs with CURRENT. 

Suggestions?
-- 
John R. Shannon

--Boundary-00=_jYtRHtUqYRipjIj
Content-Type: text/plain;
  charset="us-ascii";
  name="dmesg.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
	filename="dmesg.txt"

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.0_RC4 (GENERIC.MP) #0: Tue Nov 20 11:03:17 MST 2007
	root@winwall.internal.johnrshannon.com:/usr/obj/import/4.0/src/sys/arch/i386/compile/GENERIC.MP
multiboot: Information structure flags: 0x000007e7
multiboot: Boot loader: GNU GRUB 0.97
multiboot: Command line: /netbsd
multiboot: 639 KB lower memory, 3668928 KB upper memory
multiboot: Symbol table at 0xc0c95878, length 601840 bytes
multiboot: String table at 0xc0d28768, length 483379 bytes
total memory = 3583 MB
rbus: rbus_min_start set to 0xc0000000
avail memory = 3507 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xf0010
mainbus0 (root)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon 64 FX or Athlon 64 X2 (686-class), 3015.62 MHz, id 0x40f33
cpu0: features ffdbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features ffdbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu0: features ffdbfbff<FXSR,SSE,SSE2,B27,HTT,LONG,3DNOW2,3DNOW>
cpu0: features2 2001<SSE3>
cpu0: "Dual-Core AMD Opteron(tm) Processor 1222 SE"
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 1 MB 64B/line 16-way
cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: AMD Power Management features: 3f<STC,TM,TTP,VID,FID,TS>
cpu0: calibrating local timer
cpu0: apic clock running at 201 MHz
cpu0: 16 page colors
cpu1 at mainbus0: apid 1 (application processor)
cpu1: starting
cpu1: AMD Athlon 64 FX or Athlon 64 X2 (686-class), 3015.46 MHz, id 0x40f33
cpu1: features ffdbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features ffdbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu1: features ffdbfbff<FXSR,SSE,SSE2,B27,HTT,LONG,3DNOW2,3DNOW>
cpu1: features2 2001<SSE3>
cpu1: "Dual-Core AMD Opteron(tm) Processor 1222 SE"
cpu1: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu1: L2 cache 1 MB 64B/line 16-way
cpu1: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu1: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu1: AMD Power Management features: 3f<STC,TM,TTP,VID,FID,TS>
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 11, 24 pins
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <A M I ,OEMRSDT ,10000709>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
attimer1 at acpi0 (PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
pcppi1 at acpi0 (PNP0800)
pcppi1: io 0x61
pcppi1: children must have an explicit unit
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
com3 at acpi0 (PNP0501-1)
com3: io 0x3f8-0x3ff irq 4
com3: ns16550a, working fifo
com4 at acpi0 (PNP0501-2)
com4: io 0x2f8-0x2ff irq 3
com4: ns16550a, working fifo
PNP0700 [PC standard floppy disk controller] at acpi0 not configured
lpt3 at acpi0 (PNP0400)
lpt3: io 0x378-0x37f irq 7
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0103 [HPET Timer] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
pckbc1 at acpi0 (PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (PNP0F03): aux port
pckbc2: irq 12
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C-170): ACPI Power Button
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
pcppi1: attached to attimer1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
NVIDIA nForce MCP55 Memory Controller (RAM memory, revision 0xa2) at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0
pcib0: NVIDIA product 0x0364 (rev. 0xa3)
NVIDIA nForce MCP55 SMBus Controller (SMBus serial bus, revision 0xa3) at pci0 dev 1 function 1 not configured
ohci0 at pci0 dev 2 function 0: NVIDIA nForce MCP55 OHCI USB Controller (rev. 0xa1)
LUB0: Picked IRQ 20 with weight 0
ohci0: interrupting at ioapic0 pin 20 (irq 10)
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NVIDIA OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0 at pci0 dev 2 function 1: NVIDIA nForce MCP55 EHCI USB Controller (rev. 0xa2)
LUB2: Picked IRQ 21 with weight 0
ehci0: interrupting at ioapic0 pin 21 (irq 11)
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controller, 10 ports each: ohci0
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: NVIDIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
viaide0 at pci0 dev 4 function 0
viaide0: NVIDIA MCP55 IDE Controller (rev. 0xa1)
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel ignored (disabled)
viaide1 at pci0 dev 5 function 0
viaide1: NVIDIA MCP55 Serial ATA Controller (rev. 0xa3)
viaide1: bus-master DMA support present
viaide1: primary channel wired to native-PCI mode
LSA0: Picked IRQ 22 with weight 0
viaide1: using ioapic0 pin 22 (irq 5) for native-PCI interrupt
atabus1 at viaide1 channel 0
viaide1: secondary channel wired to native-PCI mode
atabus2 at viaide1 channel 1
viaide2 at pci0 dev 5 function 1
viaide2: NVIDIA MCP55 Serial ATA Controller (rev. 0xa3)
viaide2: bus-master DMA support present
viaide2: primary channel wired to native-PCI mode
LSA1: Picked IRQ 23 with weight 0
viaide2: using ioapic0 pin 23 (irq 10) for native-PCI interrupt
atabus3 at viaide2 channel 0
viaide2: secondary channel wired to native-PCI mode
atabus4 at viaide2 channel 1
viaide3 at pci0 dev 5 function 2
viaide3: NVIDIA MCP55 Serial ATA Controller (rev. 0xa3)
viaide3: bus-master DMA support present
viaide3: primary channel wired to native-PCI mode
LSA2: Picked IRQ 20 with weight 1
viaide3: using ioapic0 pin 20 (irq 10) for native-PCI interrupt
atabus5 at viaide3 channel 0
viaide3: secondary channel wired to native-PCI mode
atabus6 at viaide3 channel 1
ppb0 at pci0 dev 6 function 0: NVIDIA nForce MCP55 PCI-PCI Bridge (rev. 0xa2)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 6 function 0: ATI Technologies product 0x515e (rev. 0x02)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
nfe0 at pci0 dev 8 function 0: NVIDIA nForce MCP55 Gigabit Ethernet Controller (rev. 0xa3)
LMAC: Picked IRQ 21 with weight 1
nfe0: interrupting at ioapic0 pin 21 (irq 11)
nfe0: Ethernet address 00:30:48:62:5a:0c
ukphy0 at nfe0 phy 2: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000ac2, model 0x000b, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
nfe1 at pci0 dev 9 function 0: NVIDIA nForce MCP55 Gigabit Ethernet Controller (rev. 0xa3)
LMAD: Picked IRQ 22 with weight 1
nfe1: interrupting at ioapic0 pin 22 (irq 5)
nfe1: Ethernet address 00:30:48:62:5a:0d
ukphy1 at nfe1 phy 3: Generic IEEE 802.3u media interface
ukphy1: OUI 0x000ac2, model 0x000b, rev. 1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb1 at pci0 dev 10 function 0: NVIDIA product 0x0376 (rev. 0xa3)
pci2 at ppb1 bus 2
pci2: no spaces enabled!
ppb2 at pci0 dev 11 function 0: NVIDIA product 0x0374 (rev. 0xa3)
pci3 at ppb2 bus 3
pci3: no spaces enabled!
ppb3 at pci0 dev 12 function 0: NVIDIA product 0x0374 (rev. 0xa3)
pci4 at ppb3 bus 4
pci4: no spaces enabled!
ppb4 at pci0 dev 13 function 0: NVIDIA product 0x0378 (rev. 0xa3)
pci5 at ppb4 bus 5
pci5: no spaces enabled!
ppb5 at pci0 dev 14 function 0: NVIDIA product 0x0375 (rev. 0xa3)
pci6 at ppb5 bus 6
pci6: no spaces enabled!
ppb6 at pci0 dev 15 function 0: NVIDIA nForce MCP55 PCI-Express 16x Port (rev. 0xa3)
pci7 at ppb6 bus 7
pci7: no spaces enabled!
pchb0 at pci0 dev 24 function 0
pchb0: Advanced Micro Devices AMD64 HyperTransport configuration (rev. 0x00)
pchb1 at pci0 dev 24 function 1
pchb1: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00)
pchb2 at pci0 dev 24 function 2
pchb2: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)
pchb3 at pci0 dev 24 function 3
pchb3: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. 0x00)
isa0 at pcib0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
ioapic0: enabling
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
Too many symbols for tree, skipping 3224 symbols
IPsec: Initialized Security Association Processing.
atapibus0 at atabus0: 2 targets
viaide1 port 0: device present, speed: 1.5Gb/s
viaide1 port 1: device present, speed: 1.5Gb/s
cd0 at atapibus0 drive 0: <CD-224E-R, , 1.CA> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
wd0 at atabus1 drive 0: <WDC WD1500ADFD-00NLR5>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 139 GB, 290721 cyl, 16 head, 63 sec, 512 bytes/sect x 293046768 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(viaide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus2 drive 0: <WDC WD1500AHFD-00RAR5>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 139 GB, 290721 cyl, 16 head, 63 sec, 512 bytes/sect x 293046768 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(viaide1:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
cpu1: CPU 1 running
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

--Boundary-00=_jYtRHtUqYRipjIj--