Hello,

I have a problem with azalia under above mentioned release (previous 
also) on Asus A3HF laptop. The main problem is that I don't have any 
headphone output nor mixerctl trigger to control that (at least I think 
so). Here is my dmesg and AZALIA_DEBUG +mixerctl -av.

dmesg ->
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.0_RC4 (LAPTOP) #0: Fri Nov 16 22:30:44 CET 2007
        root@:/usr/obj/arch/i386/compile/LAPTOP
total memory = 495 MB
rbus: rbus_min_start set to 0x40000000
avail memory = 482 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xf0010
mainbus0 (root)
pci_addr_fixup: 000:31:1 0x8086 0x27df new address 0x00005800
pci_addr_fixup: 000:31:1 0x8086 0x27df new address 0x00005808
pci_addr_fixup: 003:01:0 0x1180 0x0476 new address 0x1f000000
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel Pentium M (Yonah) (686-class), 1596.11 MHz, id 0x6e8
cpu0: features afe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features afe9fbff<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
cpu0: features afe9fbff<FXSR,SSE,SSE2,SS,TM,SBF>
cpu0: features2 c109<SSE3,MONITOR,TM2,xTPR>
cpu0: "Intel(R) Celeron(R) M CPU        420  @ 1.60GHz"
cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu0: using thermal monitor 1
cpu0: calibrating local timer
cpu0: apic clock running at 133 MHz
ioapic0 at mainbus0 apid 1 (I/O APIC)
ioapic0: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <A M I ,OEMRSDT ,10000602>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpi: activated PNP0C0F
ATK0100 at acpi0 not configured
PNP0A08 at acpi0 not configured
PNP0C01 at acpi0 not configured
PNP0000 at acpi0 not configured
PNP0200 at acpi0 not configured
attimer0 at acpi0 (PNP0100): AT Timer
attimer0: io 0x40-0x43 irq 0
PNP0B00 at acpi0 not configured
pckbc1 at acpi0 (PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (SYN0A06): aux port
pckbc2: irq 12
PNP0800 at acpi0 not configured
npx0 at acpi0 (PNP0C04)
npx0: io 0xf0-0xff irq 13
npx0: reported by CPUID; using exception 16
PNP0C02 at acpi0 not configured
PNP0C02 at acpi0 not configured
acpiec0 at acpi0 (PNP0C09): ACPI Embedded Controller
acpiec0: io 0x62,0x66
PNP0C02 at acpi0 not configured
acpiacad0 at acpi0 (ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (PNP0C0A-0): ACPI Battery (Control Method)
PNP0C01 at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (PNP0C0E): ACPI Sleep Button
acpitz0 at acpi0: ACPI Thermal Zone
acpitz0: unable to get polling interval; using default of 30.0s
acpitz0: passive cooling mode only
acpitz0: critical 105.0C passive 36.0C
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x27a0 (rev. 0x03)
agp0 at pchb0: aperture at 0xd0000000, size 0x10000000
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x27a2 (rev. 0x03)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using 
wskbd0
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1-7 added (80x25, vt100 emulation)
i915drm0 at vga1info: [drm] Intel i945GM (unit 0)
info: [drm] AGP at 0xd0000000 256MB
info: [drm] Initialized i915 1.5.0 20060119
vendor 0x8086 product 0x27a6 (miscellaneous display, revision 0x03) at 
pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio 
Controller
azalia0: interrupting at ioapic0 pin 21 (irq 3)
azalia0: host: 0x8086/0x27d8 (rev. 2)
azalia0: host: High Definition Audio rev. 1.0
azalia0: host: 4 output, 4 input, and 0 bidi streams
azalia_attach: resetting
azalia_attach: reset counter = 4999
azalia_attach: reset counter = 4985
azalia0: found a codec at #0
azalia0: found a codec at #1
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x27d0 (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x27d2 (rev. 0x02)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
wpi0 at pci2 dev 0 function 0: vendor 0x8086 product 0x4222 (rev. 0x02)
wpi0: interrupting at ioapic0 pin 17 (irq 3)
, MoW2, address 00:18:de:d8:12:45
wpi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wpi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wpi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 
24Mbps 36Mbps 48Mbps 54Mbps
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x27c8 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 23 (irq 7)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x27c9 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 19 (irq 4)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x27ca (rev. 0x02)
uhci2: interrupting at ioapic0 pin 18 (irq 5)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x27cb (rev. 0x02)
uhci3: interrupting at ioapic0 pin 22 (irq 6)
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x27cc (rev. 0x02)
ehci0: interrupting at ioapic0 pin 23 (irq 7)
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb2 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xe2)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
cbb0 at pci3 dev 1 function 0: vendor 0x1180 product 0x0476 (rev. 0xb3)
fwohci0 at pci3 dev 1 function 1: vendor 0x1180 product 0x0552 (rev. 0x08)
fwohci0: interrupting at ioapic0 pin 18 (irq 5)
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:e0:18:00:03:5e:aa:99
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
vendor 0x1180 product 0x0822 (SD Host Controller system, revision 0x17) 
at pci3 dev 1 function 2 not configured
vendor 0x1180 product 0x0592 (miscellaneous system, revision 0x08) at 
pci3 dev 1 function 3 not configured
rtk0 at pci3 dev 7 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at ioapic0 pin 16 (irq 11)
rtk0: Ethernet address 00:17:31:dd:59:4e
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cbb0: interrupting at ioapic0 pin 17 (irq 3)
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 4
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0
pcib0: vendor 0x8086 product 0x27b9 (rev. 0x02)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
isa0 at pcib0
ioapic0: enabling
timecounter: Timecounter "TSC" frequency 1596172800 Hz quality 800
WARNING: Callback scheduled before sysmon task queue thread present.
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
ieee1394if0: bus manager 0 (me)
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0

+AZALIA part

azalia_init_corb: CORB allocation succeeded.
azalia_init_corb: CORBWP=0; size=256
azalia_init_rirb: RIRB allocation succeeded.
azalia_init_rirb: RIRBRP=0, size=256
azalia0: information of codec[0] follows:
azalia_codec_init_vtbl: vid=10ec0861 subid=12c31043
azalia0: codec[0]: Realtek ALC861 (rev. 3.64)
azalia0: codec[0]: High Definition Audio rev. 1.0
azalia_codec_init: nidstart=1 #functions=1
azalia_codec_init: FTYPE result = 0x00000001
azalia_codec_init: There are 33 widgets in the audio function.
azalia0:    encodings=1<PCM>
azalia0:    PCM formats=e0140<24bit,20bit,16bit,96kHz,48kHz>
azalia0:    inamp: mute=0 size=0 steps=0 offset=0
azalia0:    outamp: mute=1 size=0 steps=0 offset=0
azalia0: dac03 wcap=405<POWER,OUTAMP,STEREO>
azalia0:    encodings=1<PCM>
azalia0:    PCM formats=e0140<24bit,20bit,16bit,96kHz,48kHz>
azalia0:    outamp: mute=1 size=0 steps=0 offset=0
azalia0: dac04 wcap=405<POWER,OUTAMP,STEREO>
azalia0:    encodings=1<PCM>
azalia0:    PCM formats=e0140<24bit,20bit,16bit,96kHz,48kHz>
azalia0:    outamp: mute=1 size=0 steps=0 offset=0
azalia0: dac05 wcap=405<POWER,OUTAMP,STEREO>
azalia0:    encodings=1<PCM>
azalia0:    PCM formats=e0140<24bit,20bit,16bit,96kHz,48kHz>
azalia0:    outamp: mute=1 size=0 steps=0 offset=0
azalia0: dac06 wcap=405<POWER,OUTAMP,STEREO>
azalia0:    encodings=1<PCM>
azalia0:    PCM formats=e0140<24bit,20bit,16bit,96kHz,48kHz>
azalia0:    outamp: mute=1 size=0 steps=0 offset=0
azalia0: dac07 wcap=605<POWER,DIGITAL,OUTAMP,STEREO>
azalia0:    encodings=1<PCM>
azalia0:    PCM formats=e0140<24bit,20bit,16bit,96kHz,48kHz>
azalia0:    outamp: mute=1 size=0 steps=0 offset=0
azalia0: adc08 wcap=10051b<POWER,CONNLIST,FORMATOV,AMPOV,INAMP,STEREO>
azalia0:    encodings=1<PCM>
azalia0:    PCM formats=20140<16bit,96kHz,48kHz>
azalia0:    connections=0xd,0xc,0xf,0x10,0x11,0x15; selected=0xd
azalia0:    inamp: mute=1 size=11 steps=13 offset=2
azalia0: widget09 wcap=f00000
azalia0: widget0a wcap=f00000
azalia0: unknown0b wcap=400581<POWER,CONNLIST,UNSOL,STEREO>
azalia0:    pin config; device=line-out color=unknown assoc=1 seq=0 
cap=1f<OUTPUT,HEADPHONE,PRESENCE,TRIGGER,IMPEDANCE>
azalia0:    connections=0x16; selected=0x16
azalia0: blue0c wcap=400581<POWER,CONNLIST,UNSOL,STEREO>
azalia0:    pin config; device=line-in color=blue assoc=3 seq=0 
cap=37<INPUT,OUTPUT,PRESENCE,TRIGGER,IMPEDANCE>
azalia0:    connections=0x19; selected=0x19
azalia0: pink0d wcap=400581<POWER,CONNLIST,UNSOL,STEREO>
azalia0:    pin config; device=mic color=pink assoc=3 seq=14 
cap=337<INPUT,OUTPUT,PRESENCE,TRIGGER,IMPEDANCE>
azalia0:    connections=0x18; selected=0x18
azalia0: green0e wcap=400581<POWER,CONNLIST,UNSOL,STEREO>
azalia0:    pin config; device=headphones color=green assoc=1 seq=15 
cap=17<OUTPUT,PRESENCE,TRIGGER,IMPEDANCE>
azalia0:    connections=0x19; selected=0x19
azalia0: black0f wcap=400581<POWER,CONNLIST,UNSOL,STEREO>
azalia0:    pin config; device=speaker color=black assoc=15 seq=0 
cap=33f<INPUT,OUTPUT,HEADPHONE,PRESENCE,TRIGGER,IMPEDANCE>
azalia0:    connections=0x1a; selected=0x1a
azalia0: black10 wcap=400581<POWER,CONNLIST,UNSOL,STEREO>
azalia0:    pin config; device=speaker color=black assoc=15 seq=0 
cap=33f<INPUT,OUTPUT,HEADPHONE,PRESENCE,TRIGGER,IMPEDANCE>
azalia0:    connections=0x1b; selected=0x1b
azalia0: unknown11 wcap=400001<STEREO>
azalia0:    pin config; device=cd color=unknown assoc=3 seq=1 
cap=63<BALANCE,INPUT,TRIGGER,IMPEDANCE>
azalia0: unknown12 wcap=400301<DIGITAL,CONNLIST,STEREO>
azalia0:    pin config; device=SPDIF-out color=unknown assoc=2 seq=0 
cap=10<OUTPUT>
azalia0:    connections=0x7; selected=0x7
azalia0: widget13 wcap=f00000
azalia0: mix14 wcap=20010b<CONNLIST,AMPOV,INAMP,STEREO>
azalia0:    connections=0xd,0x10; selected=0xd
azalia0:    inamp: mute=1 size=0 steps=0 offset=0
azalia0: mix15 wcap=20050f<POWER,CONNLIST,AMPOV,OUTAMP,INAMP,STEREO>
azalia0:    connections=0x11,0x14,0x1c; selected=0x11
azalia0:    inamp: mute=1 size=11 steps=23 offset=12
azalia0:    outamp: mute=1 size=11 steps=12 offset=12
azalia0: mix16 wcap=20010b<CONNLIST,AMPOV,INAMP,STEREO>
azalia0:    connections=0x3,0x15; selected=0x3
azalia0:    inamp: mute=1 size=0 steps=0 offset=0
azalia0: mix17 wcap=20010b<CONNLIST,AMPOV,INAMP,STEREO>
azalia0:    connections=0x4,0x15; selected=0x4
azalia0:    inamp: mute=1 size=0 steps=0 offset=0
azalia0: mix18 wcap=20010b<CONNLIST,AMPOV,INAMP,STEREO>
azalia0:    connections=0x5,0x15; selected=0x5
azalia0:    inamp: mute=1 size=0 steps=0 offset=0
azalia0: mix19 wcap=20010b<CONNLIST,AMPOV,INAMP,STEREO>
azalia0:    connections=0x6,0x15; selected=0x6
azalia0:    inamp: mute=1 size=0 steps=0 offset=0
azalia0: mix1a wcap=20010b<CONNLIST,AMPOV,INAMP,STEREO>
azalia0:    connections=0x4,0x6,0x15,0x3; selected=0x4
azalia0:    inamp: mute=1 size=0 steps=0 offset=0
azalia0: mix1b wcap=20010b<CONNLIST,AMPOV,INAMP,STEREO>
azalia0:    connections=0x4,0x6,0x15,0x3; selected=0x4
azalia0:    inamp: mute=1 size=0 steps=0 offset=0
azalia0: mix1c wcap=20010b<CONNLIST,AMPOV,INAMP,STEREO>
azalia0:    connections=0xc,0xf; selected=0xc
azalia0:    inamp: mute=1 size=0 steps=0 offset=0
azalia0: widget1d wcap=f00000
azalia0: widget1e wcap=f00000
azalia0: black1f wcap=400581<POWER,CONNLIST,UNSOL,STEREO>
azalia0:    pin config; device=speaker color=black assoc=15 seq=0 
cap=17<OUTPUT,PRESENCE,TRIGGER,IMPEDANCE>
azalia0:    connections=0x18; selected=0x18
azalia0: black20 wcap=400581<POWER,CONNLIST,UNSOL,STEREO>
azalia0:    pin config; device=speaker color=black assoc=15 seq=0 
cap=17<OUTPUT,PRESENCE,TRIGGER,IMPEDANCE>
azalia0:    connections=0x17; selected=0x17
azalia0: widget21 wcap=f00000
azalia0: widget22 wcap=f00000
azalia0: beep23 wcap=70000c<AMPOV,OUTAMP>
azalia0:    outamp: mute=1 size=11 steps=15 offset=15
azalia_codec_init: dacgroup[0]: 03 04 05 06
azalia_codec_init: dacgroup[1]: 07
azalia0: playback: max channels=8, encodings=1<PCM>
azalia0: playback: PCM formats=e0140<24bit,20bit,16bit,96kHz,48kHz>
azalia0: recording: max channels=2, encodings=1<PCM>
azalia0: recording: PCM formats=20140<16bit,96kHz,48kHz>
generic_mixer_init: register classes
generic_mixer_default: unmute
generic_mixer_default: process bidirectional pins
generic_mixer_default: set volume
azalia0: information of codec[1] follows:
azalia_codec_init_vtbl: vid=10573055 subid=12c31043
azalia0: codec[1]: 0x1057/0x3055 (rev. 7.0)
azalia0: codec[1]: High Definition Audio rev. 1.0
azalia_codec_init: nidstart=1 #functions=1
azalia_codec_init: FTYPE result = 0x00000102
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1] has no audio function groups
azalia0: using the #0 codec
audio0 at azalia0: full duplex, independent
azalia_round_blocksize: resultant block size = 9600
azalia_round_blocksize: resultant block size = 9600

+rest of dmesg
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 1: <HL-DT-ST DVDRAM GMA-4082N, K0768BK1855, HJ02> 
cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd0 at atabus0 drive 0: <HTS421260H9AT00>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 57231 MB, 116280 cyl, 16 head, 63 sec, 512 bytes/sect x 117210240 
sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using 
DMA)
cd0(piixide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using 
DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs

+mixerctl -av

inputs.dac03.mute=off  [ off on ]
inputs.dac04.mute=off  [ off on ]
inputs.dac05.mute=off  [ off on ]
inputs.dac06.mute=off  [ off on ]
inputs.dac07.mute=off  [ off on ]
outputs.adc08.source=pink0d  [ pink0d blue0c black0f black10 unknown11 
mix15 ]
record.adc08.mute=off  [ off on ]
record.adc08=117,117  delta=19
outputs.unknown0b.boost=off  [ off on ]
outputs.blue0c.dir=output  [ input output ]
outputs.pink0d.dir=output  [ input output ]
outputs.black0f.dir=output  [ input output ]
outputs.black0f.boost=off  [ off on ]
outputs.black10.dir=output  [ input output ]
outputs.black10.boost=off  [ off on ]
outputs.unknown11.balan=off  [ off on ]
inputs.mix14.pink0d.mu=off  [ off on ]
inputs.mix14.black10.m=off  [ off on ]
outputs.mix15.mute=off  [ off on ]
outputs.mix15=106,106  delta=21
inputs.mix15.unknown11=off  [ off on ]
inputs.mix15.mix14.mut=off  [ off on ]
inputs.mix15.mix1c.mut=off  [ off on ]
inputs.mix15.unknown11=121,121  delta=11
inputs.mix15.mix14=121,121  delta=11
inputs.mix15.mix1c=121,121  delta=11
inputs.mix16.dac03.mut=off  [ off on ]
inputs.mix16.mix15.mut=off  [ off on ]
inputs.mix17.dac04.mut=off  [ off on ]
inputs.mix17.mix15.mut=off  [ off on ]
inputs.mix18.dac05.mut=off  [ off on ]
inputs.mix18.mix15.mut=off  [ off on ]
inputs.mix19.dac06.mut=off  [ off on ]
inputs.mix19.mix15.mut=off  [ off on ]
inputs.mix1a.dac04.mut=off  [ off on ]
inputs.mix1a.dac06.mut=off  [ off on ]
inputs.mix1a.mix15.mut=off  [ off on ]
inputs.mix1a.dac03.mut=off  [ off on ]
inputs.mix1b.dac04.mut=off  [ off on ]
inputs.mix1b.dac06.mut=off  [ off on ]
inputs.mix1b.mix15.mut=off  [ off on ]
inputs.mix1b.dac03.mut=off  [ off on ]
inputs.mix1c.blue0c.mu=off  [ off on ]
inputs.mix1c.black0f.m=off  [ off on ]
inputs.beep23.mute=off  [ off on ]
inputs.beep23=119  delta=17
playback.mode=03040506  [ 03040506 07 ]


I hope it is enough. If not I'll provide any additional informations.

Thank you for your help,

Piotr

----------------------------------------------------
Skacz, tańcz i klaszcz a nawet wskakuj na scenę i śpiewaj 
razem z Harlem Gospel Choir! 
Już w grudniu z elektryzującą trasą w całej Polsce. Sprawdź:
http://klik.wp.pl/?adr=http%3A%2F%2Fcorto.www.wp.pl%2Fas%2FAnioly.html&sid=96