Using current dated 10-06-2007.

I copied the GENERIC kernel.  Differences in my kernel and GENERIC are
    RTC_OFFSET=300
    PCI bridge
        using ichlpcib* at pci? dev ? function ?      # Intel ICH 
PCI-ISA w/ timecounter,
                                        # watchdog and SpeedStep support
        instead of piixpcib* at pci? dev ? function ?     # Intel PIIX4 
PCI-ISA w/ SpeedStep
    compiled with CPUFLAGS set to optimize for prescott
        makeoptions     CPUFLAGS="-march=prescott -mtune=prescott" # 
Assume at least 486,
                                                        # tune for more 
modern


=============== some kernel config data ============
# $NetBSD: T5048,v 1.001 2007/10/13 00:04:00 solomon Exp $
#
# GENERIC machine description file
#
# This machine description file is used to generate the default NetBSD
# kernel.  The generic kernel does not include all options, subsystems
# and device drivers, but should be useful for most applications.
#
# The machine description file can be customised for your specific
# machine to reduce the kernel size and improve its performance.
#
# For further information on compiling NetBSD kernels, see the config(8)
# man page.
#
# For further information on hardware support for this architecture, see
# the intro(4) man page.  For further information about kernel options
# for this architecture, see the options(4) man page.  For an explanation
# of each device driver in this file see the section 4 man page for the
# device.

include         "arch/i386/conf/std.i386"

options         INCLUDE_CONFIG_FILE     # embed config file in kernel binary

#ident          "T5048-$Revision: 1.001 $"

maxusers        32              # estimated number of users

# CPU support.  At least one is REQUIRED.
#options        I386_CPU
options         I486_CPU
options         I586_CPU
options         I686_CPU

makeoptions     CPUFLAGS="-march=prescott -mtune=prescott" # Assume at 
least 486,
                                                        # tune for more 
modern

# CPU-related options.
#options        MATH_EMULATE    # floating point emulation
options         VM86            # virtual 8086 emulation
options         USER_LDT        # user-settable LDT; used by WINE
# insert delay no-ops in interrupts; recommended on very old machines
#options        PIC_DELAY

# Enhanced SpeedStep Technology in the Pentium M
options         ENHANCED_SPEEDSTEP
#options        EST_FREQ_USERWRITE      # any user can set frequency

# AMD PowerNow! K7
options         POWERNOW_K7

# AMD PowerNow! and Cool`n'Quiet technology
options         POWERNOW_K8

# VIA PadLock
#options        VIA_PADLOCK

# Intel(R) On Demand Clock Modulation (aka ODCM)
# options       INTEL_ONDEMAND_CLOCKMOD

options         MTRR            # memory-type range register syscall support
# doesn't work with MP just yet..
#options        PERFCTRS        # performance-monitoring counters support

options         MULTIBOOT       # Multiboot support (see multiboot(8))

# delay between "rebooting ..." message and hardware reset, in milliseconds
#options        CPURESET_DELAY=2000

# This option allows you to force a serial console at the specified
# I/O address.   see console(4) for details.
#options        CONSDEVNAME="\"com\"",CONADDR=0x2f8,CONSPEED=57600
#       you don't want the option below ON iff you are using the
#       serial console option of the new boot strap code.
#options        CONS_OVERRIDE   # Always use above! independent of boot info

# The following options override the memory sizes passed in from the boot
# block.  Use them *only* if the boot block is unable to determine the 
correct
# values.  Note that the BIOS may *correctly* report less than 640k of base
# memory if the extended BIOS data area is located at the top of base memory
# (as is the case on most recent systems).
#options        REALBASEMEM=639         # size of base memory (in KB)
#options        REALEXTMEM=15360        # size of extended memory (in KB)

# Standard system options

options         INSECURE        # disable kernel security levels - X 
needs this

options         RTC_OFFSET=300  # hardware clock is this many mins. west 
of GMT
options         NTP             # NTP phase/frequency locked loop
#options        NO_TSC_TIME     # Don't use TSC microtime, even if 
available.
                                # Improves time behavior under VMware.

options         KTRACE          # system call tracing via ktrace(1)
#options        SYSTRACE        # system call vetting via systrace(1)

options         SYSVMSG         # System V-like message queues
options         SYSVSEM         # System V-like semaphores
#options        SEMMNI=10       # number of semaphore identifiers
#options        SEMMNS=60       # number of semaphores in system
#options        SEMUME=10       # max number of undo entries per process
#options        SEMMNU=30       # number of undo structures in system
options         SYSVSHM         # System V-like memory sharing
#options        SHMMAXPGS=2048  # 2048 pages is the default
options         P1003_1B_SEMAPHORE      # p1003.1b semaphore support

options         LKM             # loadable kernel modules
options         USERCONF        # userconf(4) support
#options        PIPE_SOCKETPAIR # smaller, but slower pipe(2)
options         SYSCTL_INCLUDE_DESCR    # Include sysctl descriptions in 
kernel

# Beep when it is safe to power down the system (requires sysbeep)
#options        BEEP_ONHALT
# Some tunable details of the above feature (default values used below)
#options        BEEP_ONHALT_COUNT=3     # Times to beep
#options        BEEP_ONHALT_PITCH=1500  # Default frequency (in Hz)
#options        BEEP_ONHALT_PERIOD=250  # Default duration (in msecs)

# Enable experimental buffer queue strategy for better responsiveness under
# high disk I/O load. Likely stable but not yet the default.
#options        BUFQ_READPRIO
#options        BUFQ_PRIOCSCAN

# Diagnostic/debugging support options
#options        DIAGNOSTIC      # expensive kernel consistency checks
#options        DEBUG           # expensive debugging checks/support
#options        KMEMSTATS       # kernel memory statistics (vmstat -m)
options         DDB             # in-kernel debugger
#options        DDB_ONPANIC=1   # see also sysctl(8): `ddb.onpanic'
options         DDB_HISTORY_SIZE=512    # enable history editing in DDB
#options        DDB_VERBOSE_HELP
#options        KGDB            # remote debugger
#options        KGDB_DEVNAME="\"com\"",KGDB_DEVADDR=0x3f8,KGDB_DEVRATE=9600
#makeoptions    DEBUG="-g"      # compile full symbol table
#options        SYSCALL_STATS   # per syscall counts
#options        SYSCALL_TIMES   # per syscall times
#options        SYSCALL_TIMES_HASCOUNTER        # use 'broken' rdtsc 
(soekris)

# Compatibility options
options         COMPAT_NOMID    # NetBSD 0.8, 386BSD, and BSDI
options         COMPAT_09       # NetBSD 0.9
options         COMPAT_10       # NetBSD 1.0
options         COMPAT_11       # NetBSD 1.1
options         COMPAT_12       # NetBSD 1.2, 386BSD, and BSDI
options         COMPAT_13       # NetBSD 1.3, 386BSD, and BSDI
options         COMPAT_14       # NetBSD 1.4
options         COMPAT_15       # NetBSD 1.5
options         COMPAT_16       # NetBSD 1.6
options         COMPAT_20       # NetBSD 2.0
options         COMPAT_30       # NetBSD 3.0
options         COMPAT_40       # NetBSD 4.0
options         COMPAT_43       # 4.3BSD, 386BSD, and BSDI
#options        COMPAT_386BSD_MBRPART # recognize old partition ID
#options        TCP_COMPAT_42   # 4.2BSD TCP/IP bug compat. Not recommended.

options         COMPAT_OSSAUDIO # OSS (Voxware) audio driver compatibility
options         COMPAT_SVR4     # binary compatibility with SVR4
options         COMPAT_IBCS2    # binary compatibility with SCO and ISC
options         COMPAT_LINUX    # binary compatibility with Linux
options         COMPAT_FREEBSD  # binary compatibility with FreeBSD
#options        COMPAT_MACH     # binary compatibility with Mach binaries
#options        COMPAT_DARWIN   # binary compatibility with Darwin binaries
#options        EXEC_MACHO      # exec MACH-O binaries
#options        COMPAT_NDIS     # NDIS network driver
#options        COMPAT_PECOFF   # kernel support to run Win32 apps
options         COMPAT_BSDPTY   # /dev/[pt]ty?? ptys.

# File systems
file-system     FFS             # UFS
file-system     EXT2FS          # second extended file system (linux)
file-system     LFS             # log-structured file system
file-system     MFS             # memory file system
file-system     NFS             # Network File System client
file-system     NTFS            # Windows/NT file system (experimental)
file-system     CD9660          # ISO 9660 + Rock Ridge file system
file-system     MSDOSFS         # MS-DOS file system
file-system     FDESC           # /dev/fd
file-system     KERNFS          # /kern
file-system     NULLFS          # loopback file system
file-system     OVERLAY         # overlay file system
file-system     PORTAL          # portal filesystem (still experimental)
file-system     PROCFS          # /proc
file-system     UMAPFS          # NULLFS + uid and gid remapping
file-system     UNION           # union file system
file-system     CODA            # Coda File System; also needs vcoda (below)
file-system     SMBFS           # experimental - CIFS; also needs nsmb 
(below)
file-system     PTYFS           # /dev/ptm support
file-system     TMPFS           # Efficient memory file-system
#file-system    UDF             # experimental - OSTA UDF CD/DVD file-system
#file-system    HFS             # experimental - Apple HFS+ (read-only)

# File system options
options         QUOTA           # UFS quotas
#options        FFS_EI          # FFS Endian Independent support
options         SOFTDEP         # FFS soft updates support.
# Note that UFS_DIRHASH is suspected of causing kernel memory corruption.
# It is not recommended for general use.
#options        UFS_DIRHASH     # UFS Large Directory Hashing - Experimental
options         NFSSERVER       # Network File System server
#options        FFS_NO_SNAPSHOT # No FFS snapshot support
#options        EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
                                # immutable) behave as system flags.

# Networking options
#options        GATEWAY         # packet forwarding
options         INET            # IP + ICMP + TCP + UDP
options         INET6           # IPV6
#options        IPSEC           # IP security
#options        IPSEC_ESP       # IP security (encryption part; define 
w/IPSEC)
#options        IPSEC_NAT_T     # IPsec NAT traversal (NAT-T)
#options        IPSEC_DEBUG     # debug for IP security
#options        MROUTING        # IP multicast routing
#options        PIM             # Protocol Independent Multicast
#options        ISO,TPIP        # OSI
#options        EON             # OSI tunneling over IP
options         NETATALK        # AppleTalk networking protocols
options         PPP_BSDCOMP     # BSD-Compress compression support for PPP
options         PPP_DEFLATE     # Deflate compression support for PPP
options         PPP_FILTER      # Active filter support for PPP 
(requires bpf)
options         PFIL_HOOKS      # pfil(9) packet filter hooks
options         IPFILTER_LOG    # ipmon(8) log support
options         IPFILTER_LOOKUP # ippool(8) support
#options        IPFILTER_DEFAULT_BLOCK  # block all packets by default
#options        TCP_DEBUG       # Record last TCP_NDEBUG packets with 
SO_DEBUG

#options        ALTQ            # Manipulate network interfaces' output 
queues
#options        ALTQ_BLUE       # Stochastic Fair Blue
#options        ALTQ_CBQ        # Class-Based Queueing
#options        ALTQ_CDNR       # Diffserv Traffic Conditioner
#options        ALTQ_FIFOQ      # First-In First-Out Queue
#options        ALTQ_FLOWVALVE  # RED/flow-valve (red-penalty-box)
#options        ALTQ_HFSC       # Hierarchical Fair Service Curve
#options        ALTQ_LOCALQ     # Local queueing discipline
#options        ALTQ_PRIQ       # Priority Queueing
#options        ALTQ_RED        # Random Early Detection
#options        ALTQ_RIO        # RED with IN/OUT
#options        ALTQ_WFQ        # Weighted Fair Queueing

# These options enable verbose messages for several subsystems.
# Warning, these may compile large string tables into the kernel!
options         ACPIVERBOSE     # verbose ACPI device autoconfig messages
options         EISAVERBOSE     # verbose EISA device autoconfig messages
options         MIIVERBOSE      # verbose PHY autoconfig messages
options         PCIVERBOSE      # verbose PCI device autoconfig messages
#options        PCI_CONFIG_DUMP # verbosely dump PCI config space
#options        PCMCIAVERBOSE   # verbose PCMCIA configuration messages
options         SCSIVERBOSE     # human readable SCSI error messages
options         USBVERBOSE      # verbose USB device autoconfig messages
#options        PNPBIOSVERBOSE  # verbose PnP BIOS messages
#options        PNPBIOSDEBUG    # more fulsome PnP BIOS debugging messages
options         MCAVERBOSE      # verbose MCA device autoconfig messages

options         NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM

#
# wscons options
#
# builtin terminal emulations
#options        WSEMUL_SUN              # sun terminal emulation
options         WSEMUL_VT100            # VT100 / VT220 emulation
# customization of console and kernel output - see dev/wscons/wsdisplayvar.h
options         WSDISPLAY_CUSTOM_OUTPUT # color customization from 
wsconsctl(8)
#options        WS_DEFAULT_FG=WSCOL_WHITE
#options        WS_DEFAULT_BG=WSCOL_BLACK
#options        WS_DEFAULT_COLATTR="(0)"
#options        WS_DEFAULT_MONOATTR="(0)"
options         WS_KERNEL_FG=WSCOL_GREEN
#options        WS_KERNEL_BG=WSCOL_BLACK
#options        WS_KERNEL_COLATTR=""
#options        WS_KERNEL_MONOATTR=""
# customization of console border color
options         WSDISPLAY_CUSTOM_BORDER # custom border colors via 
wsconsctl(8)
#options        WSDISPLAY_BORDER_COLOR=WSCOL_BLUE       # default color
# compatibility to other console drivers
options         WSDISPLAY_COMPAT_PCVT           # emulate some ioctls
options         WSDISPLAY_COMPAT_SYSCONS        # emulate some ioctls
options         WSDISPLAY_COMPAT_USL            # VT handling
options         WSDISPLAY_COMPAT_RAWKBD         # can get raw scancodes
#options        WSKBD_EVENT_AUTOREPEAT          # auto repeat in event mode
#options        WSKBD_USONLY                    # strip off non-US keymaps
# don't attach pckbd as the console if no PS/2 keyboard is found
options         PCKBD_CNATTACH_MAY_FAIL
# see dev/pckbport/wskbdmap_mfii.c for implemented layouts
#options        PCKBD_LAYOUT="(KB_DE | KB_NODEAD)" # for pckbd driver
#options        UKBD_LAYOUT="(KB_DE | KB_NODEAD)"  # for ukbd driver
# allocate a number of virtual screens at autoconfiguration time
#options        WSDISPLAY_DEFAULTSCREENS=4
# use a large software cursor that doesn't blink
options         PCDISPLAY_SOFTCURSOR
# modify the screen type of the console; defaults to "80x25"
#options        VGA_CONSOLE_SCREENTYPE="\"80x24\""
# work around a hardware bug that loaded fonts don't work; found on ATI 
cards
#options        VGA_CONSOLE_ATI_BROKEN_FONTSEL
# console scrolling support.
options         WSDISPLAY_SCROLLSUPPORT
# enable VGA raster mode capable of displaying multilingual text on console
#options        VGA_RASTERCONSOLE
# enable splash screen support; requires hw driver support
#options        SPLASHSCREEN
#options        SPLASHSCREEN_PROGRESS

# Kernel root file system and dump configuration.
config          netbsd  root on ? type ?
#config         netbsd  root on sd0a type ffs
#config         netbsd  root on ? type nfs

#
# Device configuration
#

mainbus0 at root

cpu* at mainbus?
ioapic* at mainbus?

# Doesn't do anything yet.
#p64h2apic* at pci? dev? function?      # P64H2 IOxAPIC

#apm0   at mainbus0                     # Advanced power management

# Tuning for power management, see apm(4) for more details.
#options        APM_NO_IDLE             # Don't call BIOS CPU idle function
#options        APM_V10_ONLY            # Use only the APM 1.0 calls
#options        APM_NO_POWEROFF         # Don't power off on halt(8)
#options        APM_POWER_PRINT         # Print stats on the console
#options        APM_DISABLE_INTERRUPTS=0 # Don't disable interrupts


# Basic Bus Support

#IPMI support
#ipmi0          at mainbus?

# Advanced Configuration and Power Interface

# This option can be used to retrieve CPU and APIC information.
# that I/O APICs can be used if ACPI is enabled below.
# To use the I/O APIC(s), enable the ioapic line above.
#options        MPBIOS          # configure CPUs and APICs using MPBIOS
#options        MPBIOS_SCANPCI  # find PCI roots using MPBIOS
options         ACPI_SCANPCI    # find PCI roots using ACPI

acpi0           at mainbus0

#options        ACPI_ACTIVATE_DEV       # If set, activate inactive devices
#options        ACPICA_PEDANTIC         # force strict conformance to 
the Spec.

# ACPI devices
apm*            at acpi?                # ACPI apm emulation
acpiacad*       at acpi?                # ACPI AC Adapter
acpibat*        at acpi?                # ACPI Battery
acpibut*        at acpi?                # ACPI Button
acpiec*         at acpi?                # ACPI Embedded Controller
acpilid*        at acpi?                # ACPI Lid Switch
acpitz*         at acpi?                # ACPI Thermal Zone

# Mainboard devices
aiboost*        at acpi?                # ASUS AI Booster Hardware Monitor
attimer*        at acpi?                # AT Timer
com*            at acpi?                # Serial communications interface
#fdc*           at acpi?                # Floppy disk controller
hpet*           at acpi?                # High Precision Event Timer
joy*            at acpi?                # Joystick/Game port
lpt*            at acpi?                # Parallel port
mpu*            at acpi?                # Roland MPU-401 MIDI UART
npx*            at acpi?                # Math coprocessor
pckbc*          at acpi?                # PC keyboard controller
pcppi*          at acpi?                # AT-style speaker sound
ug*             at acpi?                # Abit uGuru Hardware monitor
wss*            at acpi?                # NeoMagic 256AV in wss mode
ym*             at acpi?                # Yamaha OPL3-SA[23] audio

# Sony Vaio jog dial
spic*           at acpi?                # Sony Programmable I/O Controller
wsmouse*        at spic?

# Sony LCD brightness etc.
sony*           at acpi?                # Sony Miscellaneous Controller

# Toshiba Libretto devices
vald* at acpi?

# Plug-and-Play BIOS and attached devices

#pnpbios*       at mainbus?

# mainboard audio chips
#ess*           at pnpbios? index ?     # ESS AudioDrive
#sb*            at pnpbios? index ?     # NeoMagic 256AV in sb mode
#wss*           at pnpbios? index ?     # NeoMagic 256AV in wss mode
#ym*            at pnpbios? index ?     # Yamaha OPL3-SA[23] audio

# com port
# If enabled, consider changing "com0", "com1", and "com2" under "ISA Serial
# Interfaces" to "com*", otherwise com2 will attach at pnpbios? and there
# will be no com0.  A side effect is pcmcia (and other) com? previously
# starting at com3 may attach as com1 or com2.
#com*           at pnpbios? index ?     # serial ports

# parallel port
# The above "com*" comments apply, cf. "lpt0" under "ISA parallel
# "printer interfaces".
#lpt*           at pnpbios? index ?     # parallel ports

#pckbc*         at pnpbios? index ?     # PC keyboard/mouse controller
#fdc*           at pnpbios? index ?     # floppy controller
#npx*           at pnpbios? index ?     # Math coprocessor

# IDE controller on Toshiba Portege 3000 series (crippled PCI device)
#pciide*        at pnpbios? index ?

# PCI bus support
pci*    at mainbus? bus ?
pci*    at pchb? bus ?
pci*    at ppb? bus ?

# Configure PCI using BIOS information
#options        PCIBIOS                 # PCI BIOS support
#options        PCIBIOSVERBOSE          # PCI BIOS verbose info
#options        PCIBIOS_IRQS_HINT=0x0a00 # PCI interrupts hint. IRQ 9 or 11
#options        PCIBIOS_INTR_GUESS      # see pcibios(4)
#options        PCIBIOS_LIBRETTO_FIXUP  # this code makes the Toshiba 
Libretto
                                        # L2/L3 work, but should not be 
enabled
                                        # on anything else.
#options        PCIBIOS_SHARP_MM20_FIXUP # this code makes the Sharp MM 20
                                        # work, but should not be enabled
                                        # on anything else.
#options        PCIINTR_DEBUG           # super-verbose PCI interrupt fixup

# PCI fixups, for both PCIBIOS and ACPI
#options        PCI_ADDR_FIXUP          # fixup PCI I/O addresses
#options        PCI_BUS_FIXUP           # fixup PCI bus numbering
#options        PCI_INTR_FIXUP          # fixup PCI interrupt routing

# System Controllers
elansc* at pci? dev ? function ?        # AMD Elan SC520 System Controller
gpio*   at elansc?

# PCI bridges
ichlpcib* at pci? dev ? function ?      # Intel ICH PCI-ISA w/ timecounter,
                                        # watchdog and SpeedStep support
#piixpcib* at pci? dev ? function ?     # Intel PIIX4 PCI-ISA w/ SpeedStep
#gscpcib* at pci? dev ? function ?      # NS Geode PCI-ISA w/ GPIO support
#viapcib* at pci? dev ? function ?      # VIA VT8235 PCI-ISA w/ SMBus 
support
#iic*   at viapcib?
pchb*   at pci? dev ? function ?        # PCI-Host bridges
pceb*   at pci? dev ? function ?        # PCI-EISA bridges
pcib*   at pci? dev ? function ?        # PCI-ISA bridges
pcmb*   at pci? dev ? function ?        # PCI-MCA bridges
ppb*    at pci? dev ? function ?        # PCI-PCI bridges
# XXX 'puc's aren't really bridges, but there's no better place for them 
here
puc*    at pci? dev ? function ?        # PCI "universal" comm. cards

agp*    at pchb?


# EISA bus support
eisa0   at mainbus?
eisa0   at pceb?

# ISA bus support
isa0    at ichlpcib?
#isa0   at piixpcib?
#isa0   at gscpcib?
#isa0   at viapcib?
isa0    at mainbus?
isa0    at pceb?
isa0    at pcib?

# PCMCIA bus support
pcmcia* at pcic? controller ? socket ?
pcmcia* at tcic? controller ? socket ?

# MCA bus support
mca0    at mainbus?

# ISA PCMCIA controllers
pcic0   at isa? port 0x3e0 iomem 0xd0000 iosiz 0x10000
pcic1   at isa? port 0x3e2 iomem 0xe0000 iosiz 0x4000
pcic2   at isa? port 0x3e4 iomem 0xe0000 iosiz 0x4000
tcic0   at isa? port 0x240 iomem 0xd0000 iosiz 0x10000

# PCI PCMCIA controllers
pcic0   at pci? dev? function ?

# ISA Plug-and-Play bus support
isapnp0 at isa?

# ISA Plug-and-Play PCMCIA controllers
pcic*   at isapnp?

# CardBus bridge support
cbb*            at pci? dev ? function ?
cardslot*       at cbb?

# CardBus bus support
cardbus*        at cardslot?
pcmcia*         at cardslot?

# Coprocessor Support

# Math Coprocessor support
npx0    at isa? port 0xf0 irq 13        # x86 math coprocessor
.....

================ some stats on machine ============
CPU:    Intel? Pentium? 4 Processor 524 with HT Technology1
(3.06GHz, 533MHz FSB, 1MB L2 cache)
Chipset:        ATI Radeon? Xpress 200
Memory:         512MB DDR2 (1 ? 512MB), 400MHz (PC3200)
Expandable to 2GB
Hard Drive:     160GB (7200rpm, 2MB cache)3
Optical Drives:         16x multiformat dual-layer DVD?RW
(Up to 8.5GB with dual-layer media)
Write max: 16x DVD?R, 6x DVD-RW, 8x DVD+RW, 4x DVD+R DL, 40x CD-R, 24x CD-RW
Read max: 16x DVD-ROM, 40x CD-ROM
Media Reader:   9-in-1 Digital Media Manager? (Memory Stick?, Memory 
Stick Pro?, MultiMediaCard?, Secure Digital?,
CompactFlash?, MicroDrive, SmartMedia, xD-Picture Card?, USB 2.0)
Video:  ATI Radeon? Xpress 200 integrated graphics
Up to 128MB of shared video memory
PCI-Express? (PCI-E x16) slot available
Sound:  6-channel (5.1) high-definition audio
Network:        10/100Mbps integrated Ethernet LAN (RJ-45 port)
Modem:  56K ITU V.92-ready fax/modem (RJ-11 port)
Peripherals:    Standard multifunction keyboard, 2-button wheel mouse, 
amplified stereo speakers (USB powered)
Ports/Other:    5 USB 2.0 (1 in front, 4 in back), VGA external 
connector, parallel port, serial port, 2 PS/2 ports
 (keyboard and mouse), 5 audio ports (2 in front, 3 in back)


============== some of dmesg output ================
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.31 (T5048) #1: Sun Oct 28 06:24:40 EST 2007
        solomon@t5048:/usr/obj/sys/arch/i386/compile/T5048
total memory = 445 MB
rbus: rbus_min_start set to 0x40000000
avail memory = 426 MB
timecounter: Timecounters tick every 10.000 msec
RTC BIOS diagnostic error 80<clock_battery>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
cpu0 at mainbus0 apid 0: (boot processor)
cpu0: Intel (686-class), 3000.35 MHz, id 0xf4a
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 649d<SSE3,MONITOR,DS-CPL,EST,CID,xTPR>
cpu0: features3 20100000<XD,EM64T>
cpu0: "Intel(R) Pentium(R) 4 CPU 3.00GHz"
cpu0: I-cache 12K uOp cache 8-way
cpu0: L2 cache 2 MB 64B/line 8-way
cpu0: ITLB 4K/4M: 64 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: using thermal monitor 1
cpu0: calibrating local timer
cpu0: apic clock running at 200 MHz
cpu0: 64 page colors
cpu1 at mainbus0 apid 1: (application processor)
cpu1: not started
ioapic0 at mainbus0 apid 4
ioapic0: pa 0xfec00000, version 21, 24 pins
ioapic0: misconfigured as apic 0
ioapic0: remapped to apic 4
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <INTEL ,D11020M ,0000043f>, AslId <MSFT,01000013>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 32-bit timer
mpacpi: could not get bus number, assuming bus 0
CPU0 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU1 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU2 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU3 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
PCI0 (PNP0A08) [PCI Express/PCI-X Mode-2 Host Bridge] at acpi0 not 
configured
DMAC (PNP0200) [AT DMA Controller] at acpi0 not configured
npx1 at acpi0 (COPR, PNP0C04)
npx1: io 0xf0-0xfe irq 13
npx1: reported by CPUID; using exception 16
PIC (PNP0000) [AT Interrupt Controller] at acpi0 not configured
RTC (PNP0B00) [AT Real-Time Clock] at acpi0 not configured
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
attimer1 at acpi0 (TMR, PNP0100): AT Timer
attimer1: io 0x40-0x43
pckbc1 at acpi0 (KBC0, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F13): aux port
pckbc2: irq 12
SYSR (PNP0C02) [Plug and Play motherboard register resources] at acpi0 
not configured
MEM (PNP0C01) [System Board] at acpi0 not configured
lpt3 at acpi0 (ECP1, PNP0401)
lpt3: io 0x378-0x37f,0x778-0x77b irq 7 drq 4
com3 at acpi0 (UAR1, PNP0501-1)
com3: io 0x3f8-0x3ff irq 4
com3: ns16550a, working fifo
apm0 at acpi0: Power Management spec V1.2
pcppi1: attached to attimer1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: ATI Technologies product 0x5a33 (rev. 0x01)
ppb0 at pci0 dev 1 function 0: ATI Technologies RS480 PCI Express Bridge 
(rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 5 function 0: ATI Technologies product 0x5a61 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
direct rendering for vga1 unsupported
ixpide0 at pci0 dev 17 function 0
ixpide0: ATI Technologies IXP IDE Controller (rev. 0x80)
ixpide0: bus-master DMA support present
ixpide0: primary channel configured to native-PCI mode
ixpide0: using ioapic0 pin 23 (irq 10) for native-PCI interrupt
atabus0 at ixpide0 channel 0
ixpide0: secondary channel configured to native-PCI mode
atabus1 at ixpide0 channel 1
ixpide1 at pci0 dev 18 function 0
ixpide1: ATI Technologies IXP IDE Controller (rev. 0x80)
ixpide1: bus-master DMA support present
ixpide1: primary channel configured to native-PCI mode
ixpide1: using ioapic0 pin 22 (irq 9) for native-PCI interrupt
atabus2 at ixpide1 channel 0
ixpide1: secondary channel configured to native-PCI mode
.....