Subject: Re: console keyboard problems with netbsd-4/i386 (ACPI problems)
To: NetBSD/i386 Discussion List <port-i386@NetBSD.org>
From: Greg A. Woods <woods@planix.ca>
List: port-i386
Date: 06/28/2007 19:00:27
--pgp-sign-Multipart_Thu_Jun_28_19:00:25_2007-1
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: quoted-printable
At Sat, 23 Jun 2007 18:56:57 -0400, Me-planix.ca wrote:
Subject: Re: console keyboard problems with netbsd-4/i386 (2/2)
>=20
> [[ This is message/partial style split message. ]]
> [[ Please press `v' key in this buffer ]]
> [[ or click here by mouse button-2. ]]
So, apparently the NetBSD mailing list exploder doesn't deal well with
sequential message/partial postings.... I've never seen part one show
up back in my inbox.
OK, so here's another dmesg from the FreeBSD-6.2 install where ACPI
seems to work A-OK. Hopefully I've disabled the message/partial feature
for this post.
If there are any hints in here that would help "fix" NetBSD's ACPI, or
if I could provide any further hints by doing anything to test on
FreeBSD, please let me know! For example, would the "acpidump -td"
output be of any use to anyone to help me to fix the problems NetBSD has
with this machine? (Why doesn't NetBSD have acpidump(8)?)
/boot/kernel/acpi.ko text=0x43698 data=0x23c0+0x10f0 syms=[0x4+0x7ba0+0x4+0xa828]
SMAP type=01 base=0000000000000000 len=000000000009fc00
SMAP type=02 base=000000000009fc00 len=0000000000000400
SMAP type=02 base=00000000000f0000 len=0000000000010000
SMAP type=01 base=0000000000100000 len=000000003fefd000
SMAP type=03 base=000000003fffd000 len=0000000000002000
SMAP type=04 base=000000003ffff000 len=0000000000001000
SMAP type=02 base=00000000fec00000 len=0000000000001000
SMAP type=02 base=00000000fee00000 len=0000000000001000
SMAP type=02 base=00000000ffff0000 len=0000000000010000
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Fri Jan 12 11:05:30 UTC 2007
root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b63000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0b63188.
Calibrating clock(s) ... i8254 clock: 1193093 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 801822069 Hz
CPU: Intel Pentium III (801.82-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 1073729536 (1023 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c28000 - 0x000000003edb4fff, 1041813504 bytes (254349 pages)
avail memory = 1041657856 (993 MB)
MP Configuration Table version 1.1 found at 0xc00f6ad4
Table 'FACP' at 0x3fffd100
Table 'BOOT' at 0x3fffd040
Table 'APIC' at 0x3fffd080
MADT: Found table at 0x3fffd080
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 1 ACPI ID 0: enabled
SMP: Added CPU 1 (AP)
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
INTR: Adding local APIC 1 as a target
ACPI APIC Table: <ASUS P2B-D >
INTR: Adding local APIC 0 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 1
cpu1 (AP): APIC ID: 0
bios32: Found BIOS32 Service Directory header at 0xc00f9e70
bios32: Entry = 0xf0530 (c00f0530) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x730
pnpbios: Found PnP BIOS data at 0xc00fd2c0
pnpbios: Entry = f0000:d2f0 Rev = 1.0
pnpbios: OEM ID cd041
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 9, irq 20
ioapic0: intpin 9 disabled
ioapic0: intpin 20 trigger: level
ioapic0: intpin 20 polarity: high
ioapic0 <Version 1.1> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x01000000 VER: 0x00040011 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
wlan: <802.11 Link Layer>
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
rr232x: RocketRAID 232x controller driver v1.02 (Jan 12 2007 11:05:04)
npx0: INT 16 interface
acpi0: <ASUS P2B-D> on motherboard
acpi0: Overriding SCI Interrupt from IRQ 9 to IRQ 20
ioapic0: routing intpin 20 (PCI IRQ 20) to vector 48
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80002358
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
pcibios: BIOS version 2.10
Found $PIR table, 6 entries at 0xc00f0d20
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
slot 1 0 12 A 0x60 3 4 5 7 9 10 11 12
slot 1 0 12 B 0x61 3 4 5 7 9 10 11 12
slot 1 0 12 C 0x62 3 4 5 7 9 10 11 12
slot 1 0 12 D 0x63 3 4 5 7 9 10 11 12
slot 2 0 11 A 0x61 3 4 5 7 9 10 11 12
slot 2 0 11 B 0x62 3 4 5 7 9 10 11 12
slot 2 0 11 C 0x63 3 4 5 7 9 10 11 12
slot 2 0 11 D 0x60 3 4 5 7 9 10 11 12
slot 3 0 10 A 0x62 3 4 5 7 9 10 11 12
slot 3 0 10 B 0x63 3 4 5 7 9 10 11 12
slot 3 0 10 C 0x60 3 4 5 7 9 10 11 12
slot 3 0 10 D 0x61 3 4 5 7 9 10 11 12
slot 4 0 9 A 0x63 3 4 5 7 9 10 11 12
slot 4 0 9 B 0x60 3 4 5 7 9 10 11 12
slot 4 0 9 C 0x61 3 4 5 7 9 10 11 12
slot 4 0 9 D 0x62 3 4 5 7 9 10 11 12
embedded 0 4 A 0x60 3 4 5 7 9 10 11 12
embedded 0 4 B 0x61 3 4 5 7 9 10 11 12
embedded 0 4 C 0x62 3 4 5 7 9 10 11 12
embedded 0 4 D 0x63 3 4 5 7 9 10 11 12
embedded 0 1 A 0x60 3 4 5 7 9 10 11 12
embedded 0 1 B 0x61 3 4 5 7 9 10 11 12
embedded 0 1 C 0x62 3 4 5 7 9 10 11 12
embedded 0 1 D 0x63 3 4 5 7 9 10 11 12
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 4 func 0
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xd8a95000 pa 0x9e000
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 4 func 3
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 4 func 3
ACPI timer: 0/16777213 0/3 0/3 0/3 0/3 0/3 0/3 0/3 0/3 0/3 -> 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x7190, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 3, range 32, base e4000000, size 26, enabled
found-> vendor=0x8086, dev=0x7191, revid=0x03
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0117, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7110, revid=0x02
bus=0, slot=4, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=4, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000d800, size 4, enabled
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=4, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=255
map[20]: type 4, range 32, base 0000d400, size 5, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x02
bus=0, slot=4, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[90]: type 4, range 32, base 0000e800, size 4, enabled
found-> vendor=0x1039, dev=0x6326, revid=0x0b
bus=0, slot=10, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 1 supports D0 D2 D3 current D0
map[10]: type 3, range 32, base e3800000, size 23, enabled
map[14]: type 1, range 32, base e2800000, size 16, enabled
map[18]: type 4, range 32, base 0000d000, size 7, enabled
pcib0: matched entry for 0.10.INTA
pcib0: slot 10 INTA hardwired to IRQ 18
found-> vendor=0x8086, dev=0x1229, revid=0x08
bus=0, slot=12, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e2000000, size 12, enabled
map[14]: type 4, range 32, base 0000b800, size 6, enabled
map[18]: type 1, range 32, base e1800000, size 20, enabled
pcib0: matched entry for 0.12.INTA
pcib0: slot 12 INTA hardwired to IRQ 16
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe4000000-0xe7ffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe4000000
agp0: allocating GATT for aperture of size 64M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xe000-0xdfff
pcib1: memory decode 0xe3600000-0xe35fffff
pcib1: prefetched decode 0xe4000000-0xe3ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
isab0: <PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xd800-0xd80f at device 4.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xd800
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 49
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x7f msb=0x7f
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 50
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd400-0xd41f at device 4.2 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd400
pcib0: matched entry for 0.4.INTD
pcib0: slot 4 INTD hardwired to IRQ 19
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 51
uhci0: [GIANT-LOCKED]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge> at device 4.3 (no driver attached)
pci0: <display, VGA> at device 10.0 (no driver attached)
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xb800-0xb83f mem 0xe2000000-0xe2000fff,0xe1800000-0xe18fffff irq 16 at device 12.0 on pci0
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe2000000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1229 8086 000c 0008
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:d0:b7:83:40:eb
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 52
fxp0: [MPSAFE]
fdc0: <floppy drive controller> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
ioapic0: routing intpin 6 (ISA IRQ 6) to vector 53
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <ECP parallel printer port> port 0x378-0x37b,0x778-0x77b irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ioapic0: routing intpin 7 (ISA IRQ 7) to vector 54
sio0: irq maps: 0xcc81 0xcc91 0xcc81 0xcc81
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A, console
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 55
sio1: irq maps: 0xcc81 0xcc89 0xcc81 0xcc81
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ioapic0: routing intpin 3 (ISA IRQ 3) to vector 56
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 57
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 1a 03 3c
psm: status 1a 03 3c
psm: status 1a 03 3c
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 58
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 50113807 hz
Timecounter "TSC" frequency 801822069 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
rr232x: no controller detected.
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad0: setting PIO4 on PIIX4 chip
ad0: setting UDMA33 on PIIX4 chip
ad0: 29314MB <IBM DTLA-307030 TX4OA60A> at ata0-master UDMA33
ad0: 60036480 sectors [59560C/16H/63S] 16 sectors/interrupt 1 depth queue
ad0: Intel check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on PIIX4 chip
acd0: <LTN483L/EL1E> CDROM drive at ata1 as master
acd0: read 8268KB/s (8268KB/s), 120KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x00000000 VER: 0x00040011 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
INTR: Assigning IRQ 1 to local APIC 1
ioapic0: Assigning ISA IRQ 1 to local APIC 1
INTR: Assigning IRQ 3 to local APIC 0
ioapic0: Assigning ISA IRQ 3 to local APIC 0
INTR: Assigning IRQ 4 to local APIC 1
ioapic0: Assigning ISA IRQ 4 to local APIC 1
INTR: Assigning IRQ 6 to local APIC 0
ioapic0: Assigning ISA IRQ 6 to local APIC 0
INTR: Assigning IRQ 7 to local APIC 1
ioapic0: Assigning ISA IRQ 7 to local APIC 1
INTR: Assigning IRQ 12 to local APIC 0
ioapic0: Assigning ISA IRQ 12 to local APIC 0
INTR: Assigning IRQ 14 to local APIC 1
ioapic0: Assigning ISA IRQ 14 to local APIC 1
INTR: Assigning IRQ 15 to local APIC 0
ioapic0: Assigning ISA IRQ 15 to local APIC 0
INTR: Assigning IRQ 16 to local APIC 1
ioapic0: Assigning PCI IRQ 16 to local APIC 1
INTR: Assigning IRQ 19 to local APIC 0
ioapic0: Assigning PCI IRQ 19 to local APIC 0
INTR: Assigning IRQ 20 to local APIC 1
ioapic0: Assigning PCI IRQ 20 to local APIC 1
GEOM: new disk ad0
Trying to mount root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
Enter full pathname of shell or RETURN for /bin/sh:
--=20
Greg A. Woods
Planix, Inc.
<woods@planix.com> +1 416 489-5852 x122 http://www.planix.com/
--pgp-sign-Multipart_Thu_Jun_28_19:00:25_2007-1
Content-Type: application/pgp-signature
Content-Transfer-Encoding: 7bit
-----BEGIN PGP SIGNATURE-----
Version: PGPfreeware 5.0i for non-commercial use
MessageID: Bo2GDHg0e0ORPD2/Pml1HOPFK1i7SYpB
iQA/AwUBRoQ9imZ9cbd4v/R/EQKglgCgjGPfCF777lK/uGorDx7kdpkn6GQAoLUG
AeJXt6pqXwbLlHjN7GCl9VM6
=zuW2
-----END PGP SIGNATURE-----
--pgp-sign-Multipart_Thu_Jun_28_19:00:25_2007-1--