------=_20070208024329_91763
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 8bit

> Post any unidentified devices from demsg, and then run 'pcictl
> /dev/pci[0-9] list' (for each bus), and any lines that look likely.
> Probably the same line from 'pcictl /dev/pci0 list -n' is useful too.
>

I've attached the dmesg and pcictl output.

>
> Most EVDO (3G CDMA in US) cards have ohci/uhub/ugensa/ucom on them,
> and then you just run ppp.
>

Grepping another time for "ugen", I found:
ugen0: Novatel Wireless Novatel Wireless HSDPA Modem, rev 1.10/0.00, addr 3

Not sure if I missed it last time I greped or if I had the "dell wireless
switch" switched off... Anyway, gonna read some doc on how to "just run
ppp" :)

thanks.
------=_20070208024329_91763
Content-Type: text/plain; name="D420.dmesg.txt"
Content-Transfer-Encoding: 8bit
Content-Disposition: attachment; filename="D420.dmesg.txt"

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.0_BETA2 (ATHERIA-$Revision: 1.799.2.2 $) #3: Sun Jan 21 20:14:05 CET 2007
	root@atheria.tumfatig.net:/home/cvs/src/sys/arch/i386/compile/ATHERIA
total memory = 1014 MB
avail memory = 984 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xffa10
mainbus0 (root)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel Pentium M (Yonah) (686-class), 1197.40 MHz, id 0x6e8
cpu0: features bfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfe9fbff<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
cpu0: features bfe9fbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 c1a9<SSE3,MONITOR,VMX,EST,TM2,xTPR>
cpu0: "Genuine Intel(R) CPU           U2500  @ 1.20GHz"
cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu0: L2 cache 2 MB 64B/line 8-way
cpu0: using thermal monitor 1
cpu0: Enhanced SpeedStep (1020 mV) 1200 MHz
cpu0: unknown Enhanced SpeedStep CPU.
cpu0: using only highest and lowest power states.
cpu0: Enhanced SpeedStep frequencies available (MHz): 1200 800
cpu0: calibrating local timer
cpu0: apic clock running at 133 MHz
cpu0: 64 page colors
cpu1 at mainbus0: apid 1 (application processor)
cpu1: starting
cpu1: Intel Pentium M (Yonah) (686-class), 1197.31 MHz, id 0x6e8
cpu1: features bfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features bfe9fbff<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
cpu1: features bfe9fbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu1: features2 c1a9<SSE3,MONITOR,VMX,EST,TM2,xTPR>
cpu1: "Genuine Intel(R) CPU           U2500  @ 1.20GHz"
cpu1: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu1: L2 cache 2 MB 64B/line 8-way
cpu1: using thermal monitor 1
cpu1: Enhanced SpeedStep (1020 mV) 1200 MHz
cpu1: unknown Enhanced SpeedStep CPU.
cpu1: using only highest and lowest power states.
cpu1: Enhanced SpeedStep frequencies available (MHz): 1200 800
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0
ioapic0: remapped to apic 2
vesabios0 at mainbus0: version 3.0, Intel Corporation Intel(r) 82945GM Chipset Family Graphics Controller
vesafb0 at vesabios0: VESA frame buffer
vesafb0: fb 1024x768x8 @0xd0000000
vesafb0: VBE/PM 1.0 [standby] [suspend] [off] [reduced on]
wsdisplay0 at vesafb0 kbdmux 1: console (fb, vt100 emulation)
wsmux1: connecting to wsdisplay0
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <DELL  , M07    ,27d60c12>, AslId <ASL ,00000061>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
mpacpi: could not get bus number, assuming bus 0
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
pnp0c14 at acpi0 not configured
acpiacad0 at acpi0 (ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (PNP0C0A-1): ACPI Battery (Control Method)
acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (PNP0C0E): ACPI Sleep Button
PNP0C01 at acpi0 not configured
PNP0A03 at acpi0 not configured
PNP0C01 at acpi0 not configured
PNP0C01 at acpi0 not configured
pckbc1 at acpi0 (PNP0F13): aux port
pckbc1: irq 12
pckbc2 at acpi0 (PNP0303): kbd port
pckbc2: io 0x60,0x64,0x62,0x66 irq 1
PNP0B00 at acpi0 not configured
attimer1 at acpi0 (PNP0100): AT Timer
attimer1: io 0x40-0x43,0x50-0x53 irq 2
pcppi1 at acpi0 (PNP0800)
pcppi1: io 0x61,0x63,0x65,0x67
pcppi1: children must have an explicit unit
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
PNP0C01 at acpi0 not configured
PNP0000 at acpi0 not configured
PNP0200 at acpi0 not configured
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
PNP0103 at acpi0 not configured
PNP0C01 at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
acpitz0 at acpi0: ACPI Thermal Zone
acpitz0: unable to get polling interval; using default of 30.0s
acpitz0: passive cooling mode only
acpitz0: critical 107.0C
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc2 (aux slot)
pckbc2: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi1: attached to attimer1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82945GM/PM/GMS Host Bridge (rev. 0x03)
agp0 at pchb0: detected 7932k stolen memory
agp0: aperture at 0xd0000000, size 0x10000000
Intel 82945GM/PM/GMS Integrated Graphics Device (VGA display, revision 0x03) at pci0 dev 2 function 0 not configured
Intel 82945GM/PM/GMS Integrated Graphics Device (miscellaneous display, revision 0x03) at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 21 (irq 10)
azalia0: host: Intel 82801GB/GR High Definition Audio Controller (rev. 1)
azalia0: host: High Definition Audio rev. 1.0
ppb0 at pci0 dev 28 function 0: Intel 82801GB/GR PCI Express Port #1 (rev. 0x01)
pci1 at ppb0 bus 11
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: Intel 82801GB/GR PCI Express Port #2 (rev. 0x01)
pci2 at ppb1 bus 12
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
wpi0 at pci2 dev 0 function 0: Intel PRO/Wireless LAN 3945ABG Mini-PCI Adapter (rev. 0x02)
wpi0: interrupting at ioapic0 pin 17 (irq 5)
wpi0: 802.11 address 00:18:de:1f:85:35
wpi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wpi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wpi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ppb2 at pci0 dev 28 function 2: Intel 82801GB/GR PCI Express Port #3 (rev. 0x01)
pci3 at ppb2 bus 9
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
bge0 at pci3 dev 0 function 0: Broadcom BCM5752 Gigabit Ethernet
bge0: interrupting at ioapic0 pin 18 (irq 3)
bge0: pcie mode=0x105000
bge0: ASIC BCM5752 A2 (0x6002), Ethernet address 00:15:c5:50:ac:49
bge0: setting short Tx thresholds
brgphy0 at bge0 phy 1: BCM5752 1000BASE-T media interface, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci0 at pci0 dev 29 function 0: Intel 82801GB/GR USB UHCI Controller (rev. 0x01)
uhci0: interrupting at ioapic0 pin 20 (irq 9)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801GB/GR USB UHCI Controller (rev. 0x01)
uhci1: interrupting at ioapic0 pin 21 (irq 10)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801GB/GR USB UHCI Controller (rev. 0x01)
uhci2: interrupting at ioapic0 pin 22 (irq 5)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3: Intel 82801GB/GR USB UHCI Controller (rev. 0x01)
uhci3: interrupting at ioapic0 pin 23 (irq 3)
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: Intel 82801GB/GR USB EHCI Controller (rev. 0x01)
ehci0: interrupting at ioapic0 pin 20 (irq 9)
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb3 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0xe1)
pci4 at ppb3 bus 2
pci4: i/o space, memory space enabled
cbb0 at pci4 dev 1 function 0: Ricoh 5C476 PCI-CardBus bridge (rev. 0xb4)
fwohci0 at pci4 dev 1 function 1: Ricoh 5C552 PCI-CardBus bridge/Firewire (rev. 0x09)
fwohci0: interrupting at ioapic0 pin 17 (irq 5)
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 39:4f:c0:00:2f:a5:bc:50
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
Ricoh product 0x0822 (SD Host Controller system, interface 0x01, revision 0x18) at pci4 dev 1 function 2 not configured
cbb0: interrupting at ioapic0 pin 19 (irq 255)
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801GBM LPC Interface Bridge (rev. 0x01)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
Intel 82801GB/GR SMBus Controller (SMBus serial bus, revision 0x01) at pci0 dev 31 function 3 not configured
isa0 at pcib0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
isapnp0: no ISA Plug 'n Play devices found
ioapic0: enabling
WARNING: Callback scheduled before sysmon task queue thread present.
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
ieee1394if0: bus manager 0 (me)
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
azalia0: codec[0]: Sigmatel STAC9220 (rev. 34.1)
azalia0: codec[0]: High Definition Audio rev. 1.0
azalia0: playback: max channels=2, encodings=1<PCM>
azalia0: playback: PCM formats=e07e0<24bit,20bit,16bit,192kHz,176.4kHz,96kHz,88.2kHz,48kHz,44.1kHz>
azalia0: recording: max channels=2, encodings=1<PCM>
azalia0: recording: PCM formats=e07e0<24bit,20bit,16bit,192kHz,176.4kHz,96kHz,88.2kHz,48kHz,44.1kHz>
azalia0: codec[1]: 0x14f1/0x2bfa (rev. 0.0)
azalia0: codec[1]: High Definition Audio rev. 0.9
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1] has no audio function groups
audio0 at azalia0: full duplex, independent
Kernelized RAIDframe activated
Too many symbols for tree, skipping 2424 symbols
uhub5 at uhub4 port 2
uhub5: Dell product 0xa005, class 9/0, rev 2.00/50.18, addr 2
uhub5: multiple transaction translators
uhub5: 4 ports with 0 removable, self powered
ugen0 at uhub5 port 2
ugen0: Novatel Wireless Novatel Wireless HSDPA Modem, rev 1.10/0.00, addr 3
wd0 at atabus0 drive 0: <TOSHIBA MK6008GAH>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 57231 MB, 116280 cyl, 16 head, 63 sec, 512 bytes/sect x 117210240 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
uhub6 at uhub5 port 3
uhub6: O2 Micro product 0x7761, class 9/0, rev 1.10/1.10, addr 4
uhub6: 3 ports with 2 removable, bus powered
ugen1 at uhub6 port 2
ugen1: O2 O2Micro CCID SC Reader, rev 1.10/1.10, addr 5
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
cpu1: CPU 1 running
bge0: pcie mode=0x105000
bge0: pcie mode=0x105000
wsdisplay0: screen 1 added (fb, vt100 emulation)
wsdisplay0: screen 2 added (fb, vt100 emulation)
wsdisplay0: screen 3 added (fb, vt100 emulation)
wsdisplay0: screen 4 added (fb, vt100 emulation)
------=_20070208024329_91763
Content-Type: text/plain; name="D420.pcictl.txt"
Content-Transfer-Encoding: 8bit
Content-Disposition: attachment; filename="D420.pcictl.txt"

000:00:0: Intel 82945GM/PM/GMS Host Bridge (host bridge, revision 0x03)
000:02:0: Intel 82945GM/PM/GMS Integrated Graphics Device (VGA display, revision 0x03)
000:02:1: Intel 82945GM/PM/GMS Integrated Graphics Device (miscellaneous display, revision 0x03)
000:27:0: Intel 82801GB/GR High Definition Audio Controller (multimedia subclass 0x03, revision 0x01)
000:28:0: Intel 82801GB/GR PCI Express Port #1 (PCI bridge, revision 0x01)
000:28:1: Intel 82801GB/GR PCI Express Port #2 (PCI bridge, revision 0x01)
000:28:2: Intel 82801GB/GR PCI Express Port #3 (PCI bridge, revision 0x01)
000:29:0: Intel 82801GB/GR USB UHCI Controller (USB serial bus, revision 0x01)
000:29:1: Intel 82801GB/GR USB UHCI Controller (USB serial bus, revision 0x01)
000:29:2: Intel 82801GB/GR USB UHCI Controller (USB serial bus, revision 0x01)
000:29:3: Intel 82801GB/GR USB UHCI Controller (USB serial bus, revision 0x01)
000:29:7: Intel 82801GB/GR USB EHCI Controller (USB serial bus, interface 0x20, revision 0x01)
000:30:0: Intel 82801BAM Hub-PCI Bridge (PCI bridge, interface 0x01, revision 0xe1)
000:31:0: Intel 82801GBM LPC Interface Bridge (ISA bridge, revision 0x01)
000:31:1: Intel 82801GB/GR IDE Controller (IDE mass storage, interface 0x8a, revision 0x01)
000:31:3: Intel 82801GB/GR SMBus Controller (SMBus serial bus, revision 0x01)
012:00:0: Intel PRO/Wireless LAN 3945ABG Mini-PCI Adapter (miscellaneous network, revision 0x02)
009:00:0: Broadcom BCM5752 10/100/1000 Ethernet (ethernet network, revision 0x02)
002:01:0: Ricoh 5C476 PCI-CardBus bridge (CardBus bridge, revision 0xb4)
002:01:1: Ricoh 5C552 PCI-CardBus bridge/Firewire (Firewire serial bus, interface 0x10, revision 0x09)
002:01:2: Ricoh product 0x0822 (SD Host Controller system, interface 0x01, revision 0x18)

000:00:0: 0x27a08086 (0x6000003)
000:02:0: 0x27a28086 (0x3000003)
000:02:1: 0x27a68086 (0x3800003)
000:27:0: 0x27d88086 (0x4030001)
000:28:0: 0x27d08086 (0x6040001)
000:28:1: 0x27d28086 (0x6040001)
000:28:2: 0x27d48086 (0x6040001)
000:29:0: 0x27c88086 (0xc030001)
000:29:1: 0x27c98086 (0xc030001)
000:29:2: 0x27ca8086 (0xc030001)
000:29:3: 0x27cb8086 (0xc030001)
000:29:7: 0x27cc8086 (0xc032001)
000:30:0: 0x24488086 (0x60401e1)
000:31:0: 0x27b98086 (0x6010001)
000:31:1: 0x27df8086 (0x1018a01)
000:31:3: 0x27da8086 (0xc050001)
012:00:0: 0x42228086 (0x2800002)
009:00:0: 0x160014e4 (0x2000002)
002:01:0: 0x4761180 (0x60700b4)
002:01:1: 0x5521180 (0xc001009)
002:01:2: 0x8221180 (0x8050118)
------=_20070208024329_91763--