--GvXjxJ+pjyke8COw
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline

On Sat, Jan 13, 2007 at 11:43:16PM +0100, Nicolas Joly wrote:
> 
> I just tested it on a HP Pavillion 7825, which has a VIA VT86C686A
> chipset; and i can report that it works (dmesg attached).

Ooops. With the attachement this time.

-- 
Nicolas Joly

Biological Software and Databanks.
Institut Pasteur, Paris.

--GvXjxJ+pjyke8COw
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.viaenv"

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.8 (CIXY_DEVEL) #7: Sat Jan 13 22:42:34 CET 2007
	njoly@cixy.dial.pasteur.fr:/local/src/NetBSD/obj/i386/sys/arch/i386/compile/CIXY_DEVEL
total memory = 511 MB
rbus: rbus_min_start set to 0x40000000
avail memory = 492 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xfd6d0
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon Model 4 (Thunderbird) (686-class), 1000.11 MHz, id 0x642
cpu0: features c1c7f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features c1c7f9ff<PGE,MCA,CMOV,PAT,PSE36,PN,MMXX,MMX>
cpu0: features c1c7f9ff<FXSR,3DNOW2,3DNOW>
cpu0: "AMD Athlon(tm) Processor"
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 256 KB 64B/line 16-way
cpu0: ITLB 16 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 24 4 KB entries fully associative, 8 4 MB entries 4-way
cpu0: 8 page colors
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <PTLTD ,  RSDT  ,06040000>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
LNKC: ACPI: Found matching pin for 0.7.INTC at func 5: 11
LNKD: ACPI: Found matching pin for 0.7.INTD at func 2: 9
LNKA: ACPI: Found matching pin for 0.13.INTA at func 0: 11
LNKB: ACPI: Found matching pin for 0.18.INTA at func 0: 5
LNKA: ACPI: Found matching pin for 1.0.INTA at func 0: 11
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
npx0 at acpi0 (PNP0C04)
npx0: io 0xf0-0xfe irq 13
npx0: reported by CPUID; using exception 16
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
pcppi0 at acpi0 (PNP0800)
pcppi0: io 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
attimer0 at acpi0 (PNP0100): AT Timer
attimer0: io 0x40-0x43 irq 0
pckbc0 at acpi0 (PNP0303): kbd port
pckbc0: io 0x60,0x64 irq 1
pckbc1 at acpi0 (PNP0F13-16): aux port
pckbc1: irq 12
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0A05 [Generic Container Device] at acpi0 not configured
fdc0 at acpi0 (PNP0700)
fdc0: io 0x3f0-0x3f5,0x3f7 irq 6 drq 2
com0 at acpi0 (PNP0501-1)
com0: io 0x3f8-0x3ff irq 4
com0: ns16550a, working fifo
com1 at acpi0 (PNP0501-2)
com1: io 0x2f8-0x2ff irq 3
com1: ns16550a, working fifo
PNP0400 [Standard LPT printer port] at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
pcppi0: attached to attimer0
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies VT8363 (Apollo KT133) Host Bridge (rev. 0x81)
agp0 at pchb0: aperture at 0xf8000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: VIA Technologies VT8363 (Apollo KT133) PCI to AGP Bridge (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: 3Dfx Interactive Voodoo3 (rev. 0x01)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 7 function 0
pcib0: VIA Technologies VT82C686A PCI-ISA Bridge (rev. 0x22)
viaide0 at pci0 dev 7 function 1
viaide0: VIA Technologies VT82C686A (Apollo KX133) ATA66 controller
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at irq 15
atabus1 at viaide0 channel 1
uhci0 at pci0 dev 7 function 2: VIA Technologies VT83C572 USB Controller (rev. 0x10)
uhci0: interrupting at irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 7 function 3: VIA Technologies VT83C572 USB Controller (rev. 0x10)
uhci1: interrupting at irq 9
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
viaenv0 at pci0 dev 7 function 4
: VIA VT82C686A Hardware Monitor
timecounter: Timecounter "viaenv0" frequency 3579545 Hz quality 1000
viaenv0 24-bit timer

auvia0 at pci0 dev 7 function 5: VIA Technologies VT82C686A AC'97 Audio (rev H)
auvia0: interrupting at irq 11
auvia0: ac97: Crystal CS4299 codec; headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
auvia0: ac97: ext id 201<AMAP,VRA>
audio0 at auvia0: full duplex, mmap, independent
epic0 at pci0 dev 13 function 0: SMC 83c170 Fast Ethernet, rev. 9
epic0: interrupting at irq 11
epic0: SMC9432TX_1, Ethernet address 00:e0:29:8e:a2:f2
acphy0 at epic0 phy 3: AC101 10/100 media interface, rev. 11
acphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rtk0 at pci0 dev 18 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at irq 5
rtk0: Ethernet address 00:e0:18:32:d9:c0
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
isapnp0: no ISA Plug 'n Play devices found
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <ST380021A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd1 at atabus0 drive 1: <ST380021A>
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
wd1(viaide0:0:1): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <Pioneer DVD-ROM ATAPIModel DVD-116  012, , E1.22> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
cd1 at atapibus0 drive 1: <CD-W58E, , 6.0A> cdrom removable
cd1: 32-bit data port
cd1: drive supports PIO mode 4, DMA mode 2
cd0(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
cd1(viaide0:1:1): using PIO mode 4, DMA mode 2 (using DMA)
boot device: wd1
root on wd1a dumps on wd1b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

--GvXjxJ+pjyke8COw--