Here's dmesg output from the Intel mini.  (Core Duo)

The msk ethernet was unusable on my original kernel, but adding acpi support
seems to have fixed that and gotten me working SMP.  Working beautifully;
haven't yet set up X.

---
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.3 (KNIVES) #0: Fri Oct  6 22:55:36 CDT 2006
	seebs@knives.seebs.net:/usr/src/sys/arch/i386/compile/KNIVES
total memory = 2016 MB
avail memory = 1975 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
timecounter: selected timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel Pentium M (Yonah) (686-class), 1666.74 MHz, id 0x6e8
cpu0: features bfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfe9fbff<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
cpu0: features bfe9fbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 c1a9<SSE3,MONITOR,VMX,EST,TM2,xTPR>
cpu0: "Genuine Intel(R) CPU           T2300  @ 1.66GHz"
cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu0: L2 cache 2 MB 64B/line 8-way
cpu0: using thermal monitor 1
cpu0: Enhanced SpeedStep (1404 mV) 1667 MHz
cpu0: unknown Enhanced SpeedStep CPU.
cpu0: using only highest and lowest  power states.
cpu0: Enhanced SpeedStep frequencies available (MHz): 1667 1000
cpu0: calibrating local timer
cpu0: apic clock running at 166 MHz
cpu0: 64 page colors
cpu1 at mainbus0: apid 1 (application processor)
cpu1: starting
cpu1: Intel Pentium M (Yonah) (686-class), 1666.64 MHz, id 0x6e8
cpu1: features bfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features bfe9fbff<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
cpu1: features bfe9fbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu1: features2 c1a9<SSE3,MONITOR,VMX,EST,TM2,xTPR>
cpu1: "Genuine Intel(R) CPU           T2300  @ 1.66GHz"
cpu1: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu1: L2 cache 2 MB 64B/line 8-way
cpu1: using thermal monitor 1
cpu1: Enhanced SpeedStep (1404 mV) 1667 MHz
cpu1: unknown Enhanced SpeedStep CPU.
cpu1: using only highest and lowest  power states.
cpu1: Enhanced SpeedStep frequencies available (MHz): 1667 1000
ioapic0 at mainbus0 apid 1 (I/O APIC)
ioapic0: pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0
ioapic0: remapped to apic 1
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <APPLE , Apple00,00000055>, AslId <    ,01000013>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
timecounter: selected timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0C0C at acpi0 not configured
PNP0A08 at acpi0 not configured
PNP0C02 at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
APP0001 at acpi0 not configured
PNP0C09 at acpi0 not configured
IFX0101 at acpi0 not configured
PNP0200 at acpi0 not configured
INT0800 at acpi0 not configured
PNP0103 at acpi0 not configured
PNP0000 at acpi0 not configured
PNP0C04 at acpi0 not configured
PNP0C02 at acpi0 not configured
PNP0B00 at acpi0 not configured
PNP0100 at acpi0 not configured
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82945GM/PM/GMS Host Bridge (rev. 0x03)
agp0 at pchb0: unknown memory configuration, disabling
vga0 at pci0 dev 2 function 0: Intel 82945GM/PM/GMS Integrated Graphics Device (rev. 0x03)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
Intel product 0x27a3 (Time and Frequency DASP, revision 0x03) at pci0 dev 7 function 0 not configured
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 22 (irq 11)
azalia0: host: Intel 82801GB/GR High Definition Audio Controller (rev. 2)
azalia0: host: High Definition Audio rev. 1.0
ppb0 at pci0 dev 28 function 0: Intel 82801GB/GR PCI Express Port #1 (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
mskc0 at pci1 dev 0 function 0mskc0: interrupt moderation is 0 us
, Marvell Yukon-2 EC rev. A3 (0x2): ioapic0 pin 16 (irq 11)
msk0 at mskc0 port A: Ethernet address 00:16:cb:92:e6:ba
makphy0 at msk0 phy 0: Marvell 88E1111 Gigabit PHY, rev. 2
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb1 at pci0 dev 28 function 1: Intel 82801GB/GR PCI Express Port #2 (rev. 0x02)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ath0 at pci2 dev 0 function 0
ath0: interrupting at ioapic0 pin 17 (irq 11)
ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: mac 10.3 phy 6.1 radio 10.2
uhci0 at pci0 dev 29 function 0: Intel 82801GB/GR USB UHCI Controller (rev. 0x02)
uhci0: interrupting at ioapic0 pin 21 (irq 11)
usbd_match
usb0 at uhci0usbd_attach
: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801GB/GR USB UHCI Controller (rev. 0x02)
uhci1: interrupting at ioapic0 pin 19 (irq 11)
usbd_match
usb1 at uhci1usbd_attach
: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801GB/GR USB UHCI Controller (rev. 0x02)
uhci2: interrupting at ioapic0 pin 18 (irq 11)
usbd_match
usb2 at uhci2usbd_attach
: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3: Intel 82801GB/GR USB UHCI Controller (rev. 0x02)
uhci3: interrupting at ioapic0 pin 16 (irq 10)
usbd_match
usb3 at uhci3usbd_attach
: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: Intel 82801GB/GR USB EHCI Controller (rev. 0x02)
ehci0: interrupting at ioapic0 pin 21 (irq 11)
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usbd_match
usb4 at ehci0usbd_attach
: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb2 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0xe2)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
fwohci0 at pci3 dev 3 function 0: Lucent Technologies FW322/323 IEEE 1394 Host Controller (rev. 0x61)
fwohci0: interrupting at ioapic0 pin 19 (irq 11)
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:16:cb:ff:fe:69:7b:14
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801GBM LPC Interface Bridge (rev. 0x02)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at piixide0 channel 1
piixide1 at pci0 dev 31 function 2
piixide1: Intel 82801GBM/GHM Serial ATA Controller (ICH7) (rev. 0x02)
piixide1: bus-master DMA support present
piixide1: primary channel configured to native-PCI mode
piixide1: using ioapic0 pin 19 (irq 11) for native-PCI interrupt
atabus2 at piixide1 channel 0
piixide1: secondary channel configured to native-PCI mode
atabus3 at piixide1 channel 1
Intel 82801GB/GR SMBus Controller (SMBus serial bus, revision 0x02) at pci0 dev 31 function 3 not configured
isa0 at pcib0
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff
npx0: using exception 16
pcppi0: attached to attimer0
ioapic0: enabling
fwohci0: node_id=0xc800ffc0, gen=2, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
ieee1394if0: bus manager 0 (me)
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
azalia0: codec[0]: Sigmatel STAC9221 (rev. 52.1)
azalia0: codec[0]: High Definition Audio rev. 1.0
azalia0: playback: max channels=8, encodings=1<PCM>
azalia0: playback: PCM formats=e07e0<24bit,20bit,16bit,192kHz,176.4kHz,96kHz,88.2kHz,48kHz,44.1kHz>
azalia0: recording: max channels=4, encodings=1<PCM>
azalia0: recording: PCM formats=e07e0<24bit,20bit,16bit,192kHz,176.4kHz,96kHz,88.2kHz,48kHz,44.1kHz>
audio0 at azalia0: full duplex, independent
usb_event_thread: start
usb_task_thread: start
usb_event_thread: start
usb_event_thread: start
usb_event_thread: start
usb_event_thread: start
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <MATSHITADVD-R   UJ-846, , FM3J> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
wd0 at atabus2 drive 1: <ST98823AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide1:0:1): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
ehci0: handing over full speed device on port 6 to uhci2
uhub4: port 6, device disappeared after reset
ehci0: handing over full speed device on port 7 to uhci3
uhub4: port 7, device disappeared after reset
uhub5 at uhub2 port 2
uhub5: ALCOR STRONG MAN KBD HUB, class 9/0, rev 1.10/1.00, addr 2
uhub5: 3 ports with 2 removable, bus powered
ehci0: handing over full speed device on port 8 to uhci3
uhub4: port 8, device disappeared after reset
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
cpu1: CPU 1 running
uhidev0 at uhub3 port 1 configuration 1 interface 0
uhidev0: Apple Computer product 0x1000, rev 2.00/19.65, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
uhidev1 at uhub5 port 1 configuration 1 interface 0
uhidev1: ALCOR STRONG MAN KBD HUB, rev 1.10/0.01, addr 3, iclass 3/1
ukbd1 at uhidev1: 8 modifier keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev2 at uhub3 port 1 configuration 1 interface 1
uhidev2: Apple Computer product 0x1000, rev 2.00/19.65, addr 2, iclass 3/1
ums0 at uhidev2: 5 buttons
wsmouse0 at ums0 mux 0
mskc0: interrupt moderation is 100 us
wskbd1 at ukbd1 mux 1
wskbd1: connecting to wsdisplay0
uhidev3 at uhub5 port 1 configuration 1 interface 1
uhidev3: ALCOR STRONG MAN KBD HUB, rev 1.10/0.01, addr 3, iclass 3/0
uhidev3: 3 report ids
uhid0 at uhidev3 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev3 reportid 3: input=3, output=0, feature=0
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
/usr/src fs uses soft updates, ignoring async mode
uhidev4 at uhub5 port 2 configuration 1 interface 0
uhidev4: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.00, addr 4, iclass 3/1
ums1 at uhidev4: 3 buttons and Z dir.
wsmouse1 at ums1 mux 0
uhidev5 at uhub3 port 2 configuration 1 interface 0
uhidev5: Apple Computer, Inc. IR Receiver, rev 2.00/1.09, addr 3, iclass 3/0
uhidev5: 38 report ids
uhid2 at uhidev5 reportid 36: input=4, output=0, feature=0
uhid3 at uhidev5 reportid 37: input=4, output=0, feature=0
uhid4 at uhidev5 reportid 38: input=4, output=0, feature=0
uhidev6 at uhub5 port 3 configuration 1 interface 0
uhidev6: Logitech Trackball, rev 1.10/2.20, addr 5, iclass 3/1
ums2 at uhidev6: 3 buttons and Z dir.
wsmouse2 at ums2 mux 0