--Boundary-00=_0lxbEQAZ8fjpoaM
Content-Type: text/plain;
  charset="us-ascii"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

Greetings, I'm having trouble getting NetBSD to work correctly on my IBM 
ThinkPad R40 with a Cisco Aironet 350 mini-PCI wireless card. When 
running "ifconfig -a" everything that appears is the regular wired card, and 
during boot time the following error message appears (full dmesg included as 
a attachment):

cbb0 at pci2 dev 0 function 0: Texas Instruments PCI1510 PCI-CardBus Bridge 
(rev. 0x00)
Aironet Wireless Communications MPI350 Mini-PCI Wireless LAN Adapter 
(miscellaneous network) at pci2 dev 2 function 0 not configured

As far as I know, the an(4)-driver that supposedly supports this card is 
included in the GENERIC-kernel that I use, so as a new NetBSD user I feel a 
little lost... Any tips or suggestions on how I should proceed would be 
greatly appreciated.

--Boundary-00=_0lxbEQAZ8fjpoaM
Content-Type: text/x-java;
  charset="us-ascii";
  name="dmesg"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
	filename="dmesg"

NetBSD 3.0 (GENERIC) #0: Mon Dec 19 01:04:02 UTC 2005
	builds@works.netbsd.org:/home/builds/ab/netbsd-3-0-RELEASE/i386/200512182024Z-obj/home/builds/ab/netbsd-3-0-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 510 MB
avail memory = 492 MB
BIOS32 rev. 0 found at 0xfd7b0
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Mobile Pentium 4 (686-class), 1993.63 MHz, id 0xf27
cpu0: features bfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features bfebf9ff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebf9ff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 4400<CID,xTPR>
cpu0: "Mobile Intel(R) Pentium(R) 4 - M CPU 2.00GHz"
cpu0: I-cache 12K uOp cache 8-way, D-cache 8 KB 64B/line 4-way
cpu0: L2 cache 512 KB 64B/line 8-way
cpu0: ITLB 4K/4M: 128 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: using thermal monitor 1
cpu0: 16 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82845 Host (rev. 0x04)
agp0 at pchb0: aperture at 0xe0000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Intel 82845 AGP (rev. 0x04)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: ATI Technologies Radeon Mobility M6 LY (AGP) (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
uhci0 at pci0 dev 29 function 0: Intel 82801DB USB UHCI Controller (rev. 0x03)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801DB USB UHCI Controller (rev. 0x03)
uhci1: interrupting at irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801DB USB UHCI Controller (rev. 0x03)
uhci2: interrupting at irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: Intel 82801DB USB EHCI Controller (rev. 0x03)
ehci0: interrupting at irq 11
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: single transaction translator
uhub3: 6 ports with 6 removable, self powered
ppb1 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0x83)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
cbb0 at pci2 dev 0 function 0: Texas Instruments PCI1510 PCI-CardBus Bridge (rev. 0x00)
Aironet Wireless Communications MPI350 Mini-PCI Wireless LAN Adapter (miscellaneous network) at pci2 dev 2 function 0 not configured
fxp0 at pci2 dev 8 function 0: Intel PRO/100 VE (MOB) Network Controller, rev 131
fxp0: interrupting at irq 11
fxp0: May need receiver lock-up workaround
fxp0: Ethernet address 00:06:1b:e0:d8:31
inphy0 at fxp0 phy 1: i82562ET 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cbb0: interrupting at irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801DB ISA Bridge (rev. 0x03)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801DBM IDE Controller (ICH4-M) (rev. 0x03)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
Intel 82801DB SMBus Controller (SMBus serial bus, revision 0x03) at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5: i82801DB/DBM (ICH4/ICH4M) AC-97 Audio
auich0: interrupting at irq 11
auich0: ac97: Analog Devices AD1981B codec; headphone, 20 bit DAC, no 3D stereo
auich0: ac97: ext id 601<AC97_22,AMAP,VRA>
Intel 82801DB AC97 Modem Controller (modem communications, revision 0x03) at pci0 dev 31 function 6 not configured
isa0 at pcib0
lpt2 at isa0 port 0x3bc-0x3bf irq : polled
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
auich0: measured ac97 link rate at 48001 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <FUJITSU MHS2020AT E>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 19077 MB, 41344 cyl, 15 head, 63 sec, 512 bytes/sect x 39070080 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-STDVD-ROM GDR8081N, , 0012> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

--Boundary-00=_0lxbEQAZ8fjpoaM--