Subject: Re: NetBSD/i386 3.0 on Parallels Workstation for Intel Mac
To: Jason Thorpe <thorpej@shagadelic.org>
From: Andreas Wrede <andreas@planix.com>
List: port-i386
Date: 04/15/2006 08:55:15
On 14-Apr-06, at 17:21 , Jason Thorpe wrote:

> I'm happy to report that it boots and works fine.

Hmm. For me, on a MacBook Pro, it boots fine but no PCI bus is  
detected. The IDE drives are attached via ISA->wdc , so I can see the  
disks and even install but since the Ethernet controller (rtk8029) is  
attached to the PCI bus, I have no network. Other OSes find the PCI  
bus and network controller.

I have tried both 3.0 and -current from last week:

NetBSD 3.99.17 (GENERIC) #4: Mon Apr 10 17:32:58 EDT 2006
         root@woffi.planix.com:/m5/netbsd-current/obj.i386/sys/arch/ 
i386/compile/GENERIC
total memory = 511 MB
avail memory = 494 MB
BIOS32 rev. 0 found at 0xf9000
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Celeron (Mendocino) (686-class), 1151.63 MHz, id 0x665
cpu0: "Genuine Intel(R) CPU           T2600  @ 2.16GHz"
isa0 at mainbus0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns8250 or ns16450, no fifo
com0: console
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer0 at isa0 port 0x40-0x43: AT Timer
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
atabus0 at wdc0 channel 0
vga0 at isa0 port 0x3b0-0x3df iomem 0xa0000-0xbffff
wsdisplay0 at vga0 kbdmux 1
wsmux1: connecting to wsdisplay0
wskbd0: connecting to wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff
pcppi0: attached to attimer0
isapnp0: no ISA Plug 'n Play devices found
Kernelized RAIDframe activated
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 1: <PRL CD-ROM [1], - 31415B265, FWR1000>  
cdrom removable
cd0: drive supports PIO mode 4
wd0 at atabus0 drive 0: <Virtual HDD [0]>
wd0: drive supports 128-sector PIO transfers, LBA addressing
wd0: 4096 MB, 8323 cyl, 16 head, 63 sec, 512 bytes/sect x 8389584  
sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs

-- 
     aew