The full dmesg with GENERIC (and a GENERIC.MP-ish below).  Hope this helps
triage:

diablo> dmesg
NetBSD 3.0_STABLE (GENERIC) #11: Fri Feb 24 16:46:25 CST 2006
        
peter@buster:/builds/netbsd-3/i386/obj/builds/netbsd-3/src/sys/arch/i386/com
pile/GENERIC
total memory = 2047 MB
avail memory = 1996 MB
BIOS32 rev. 0 found at 0xffe90
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium III (686-class), 1130.52 MHz, id 0x6b1
cpu0: features 383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 383fbff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 383fbff<FXSR,SSE>
cpu0: "Intel(R) Pentium(R) III CPU family      1133MHz"
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 512 KB 32B/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 16 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: ServerWorks CNB20-HE PCI bridge (rev. 0x23)
pchb1 at pci0 dev 0 function 1
pchb1: ServerWorks CNB20-HE PCI bridge (rev. 0x01)
pci1 at pchb1 bus 4
pci1: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
ppb0 at pci1 dev 2 function 0: Intel i960 RM PCI-PCI (rev. 0x02)
pci2 at ppb0 bus 5
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ahc1 at pci2 dev 4 function 0: Adaptec aic7899 Ultra160 SCSI adapter
ahc1: interrupting at irq 5
ahc1: aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsibus0 at ahc1: 16 targets, 8 luns per target
ahc2 at pci2 dev 4 function 1: Adaptec aic7899 Ultra160 SCSI adapter
ahc2: interrupting at irq 11
ahc2: aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
scsibus1 at ahc2: 16 targets, 8 luns per target
fxp0 at pci1 dev 4 function 0: i82559 Ethernet, rev 8
fxp0: interrupting at irq 11
fxp0: May need receiver lock-up workaround
fxp0: Ethernet address 00:06:5b:04:a5:8f
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pchb2 at pci0 dev 0 function 2
pchb2: ServerWorks CNB30-LE PCI bridge (rev. 0x01)
pchb3 at pci0 dev 0 function 3
pchb3: ServerWorks CNB30-LE PCI bridge (rev. 0x01)
pci3 at pchb3 bus 3
pci3: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
bge0 at pci3 dev 8 function 0: Broadcom BCM5700 Gigabit Ethernet
bge0: interrupting at irq 5
bge0: ASIC BCM5700 B1 (0x7102), Ethernet address 00:06:5b:04:a5:90
brgphy0 at bge0 phy 1: BCM5401 1000BASE-T media interface, rev. 3
brgphy0: using BCM5401 DSP patch
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
ppb1 at pci0 dev 2 function 0: Digital Equipment DC21154 PCI-PCI Bridge
(rev. 0x05)
pci4 at ppb1 bus 1
pci4: i/o space, memory space enabled
ppb2 at pci4 dev 0 function 0: Digital Equipment DC21154 PCI-PCI Bridge
(rev. 0x05)
pci5 at ppb2 bus 2
pci5: i/o space, memory space enabled
amr0 at pci5 dev 0 function 0: AMI RAID <PERC 3/DC>
amr0: interrupting at irq 11
amr0: firmware 198U, BIOS 3.35, 128MB RAM
ld0 at amr0 unit 0: RAID 5, optimal
ld0: 34556 MB, 8776 cyl, 128 head, 63 sec, 512 bytes/sect x 70770688 sectors
isp0 at pci4 dev 1 function 0: QLogic Dual Channel Ultra-3 Wide SCSI HBA
isp0: interrupting at irq 5
isp0: interrupt (ISR=4 SEMA=0) when not ready
isp0: Polled Mailbox Command (0x8) Timeout
isp0: interrupt (ISR=4 SEMA=0) when not ready
isp0: Polled Mailbox Command (0x32) Timeout
fxp1 at pci0 dev 8 function 0: i82559 Ethernet, rev 8
fxp1: interrupting at irq 11
fxp1: Ethernet address 00:90:27:a4:f6:9b
inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 4
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vga1 at pci0 dev 14 function 0: ATI Technologies Rage XL (rev. 0x27)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 15 function 0
pcib0: ServerWorks OSB4 southbridge (rev. 0x50)
rccide0 at pci0 dev 15 function 1
rccide0: ServerWorks OSB4 IDE Controller (rev. 0x00)
rccide0: bus-master DMA support present
rccide0: primary channel configured to compatibility mode
rccide0: primary channel interrupting at irq 14
atabus0 at rccide0 channel 0
rccide0: secondary channel configured to compatibility mode
rccide0: secondary channel interrupting at irq 15
atabus1 at rccide0 channel 1
ohci0 at pci0 dev 15 function 2: ServerWorks OSB4/CSB5 USB Host Controller
(rev. 0x04)
ohci0: interrupting at irq 10
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ServerWorks OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
isp0: Mbox Command Async (0x4000) with no waiters
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <SAMSUNG CD-ROM SN-124, , q009> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(rccide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
(using DMA)
boot device: ld0
root on ld0a dumps on ld0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
isp0: interrupt (ISR=4 SEMA=0) when not ready
isp0: interrupt (ISR=4 SEMA=0) when not ready
diablo> 


And with a kernel based on GENERIC.MP.  Note that while it didn't happen to
have the timeout issues on this boot, it has in the past:

diablo> dmesg
NetBSD 3.0_STABLE (PETER-FW) #19: Sat Feb 25 21:40:14 CST 2006
        
peter@buster:/builds/netbsd-3/i386/obj/builds/netbsd-3/src/sys/arch/i386/com
pile/PETER-FW
total memory = 2047 MB
avail memory = 1995 MB
BIOS32 rev. 0 found at 0xffe90
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (DELL     POWEREDGE D1)
cpu0 at mainbus0: apid 1 (boot processor)
cpu0: Intel Pentium III (686-class), 1130.55 MHz, id 0x6b1
cpu0: features 383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 383fbff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 383fbff<FXSR,SSE>
cpu0: "Intel(R) Pentium(R) III CPU family      1133MHz"
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 512 KB 32B/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: calibrating local timer
cpu0: apic clock running at 132 MHz
cpu0: 16 page colors
cpu1 at mainbus0: apid 0 (application processor)
cpu1: starting
cpu1: Intel Pentium III (686-class), 1130.45 MHz, id 0x6b1
cpu1: features 383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features 383fbff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu1: features 383fbff<FXSR,SSE>
cpu1: "Intel(R) Pentium(R) III CPU family      1133MHz"
cpu1: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu1: L2 cache 512 KB 32B/line 8-way
cpu1: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu1: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type PCI
mpbios: bus 4 is type PCI
mpbios: bus 5 is type PCI
mpbios: bus 6 is type ISA
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 11, 16 pins
ioapic0: misconfigured as apic 0
ioapic0: remapped to apic 2
ioapic1 at mainbus0 apid 3 (I/O APIC)
ioapic1: pa 0xfec01000, version 11, 16 pins
ioapic1: misconfigured as apic 0
ioapic1: remapped to apic 3
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: ServerWorks CNB20-HE PCI bridge (rev. 0x23)
pchb1 at pci0 dev 0 function 1
pchb1: ServerWorks CNB20-HE PCI bridge (rev. 0x01)
pci1 at pchb1 bus 4
pci1: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
ppb0 at pci1 dev 2 function 0: Intel i960 RM PCI-PCI (rev. 0x02)
pci2 at ppb0 bus 5
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ahc1 at pci2 dev 4 function 0: Adaptec aic7899 Ultra160 SCSI adapter
ahc1: interrupting at ioapic1 pin 15 (irq 5)
ahc1: aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsibus0 at ahc1: 16 targets, 8 luns per target
ahc2 at pci2 dev 4 function 1: Adaptec aic7899 Ultra160 SCSI adapter
ahc2: interrupting at ioapic1 pin 14 (irq 11)
ahc2: aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
scsibus1 at ahc2: 16 targets, 8 luns per target
fxp0 at pci1 dev 4 function 0: i82559 Ethernet, rev 8
fxp0: interrupting at ioapic1 pin 0 (irq 11)
fxp0: May need receiver lock-up workaround
fxp0: Ethernet address 00:06:5b:04:a5:8f
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pchb2 at pci0 dev 0 function 2
pchb2: ServerWorks CNB30-LE PCI bridge (rev. 0x01)
pchb3 at pci0 dev 0 function 3
pchb3: ServerWorks CNB30-LE PCI bridge (rev. 0x01)
pci3 at pchb3 bus 3
pci3: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
bge0 at pci3 dev 8 function 0: Broadcom BCM5700 Gigabit Ethernet
bge0: interrupting at ioapic1 pin 1 (irq 5)
bge0: ASIC BCM5700 B1 (0x7102), Ethernet address 00:06:5b:04:a5:90
brgphy0 at bge0 phy 1: BCM5401 1000BASE-T media interface, rev. 3
brgphy0: using BCM5401 DSP patch
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
ppb1 at pci0 dev 2 function 0: Digital Equipment DC21154 PCI-PCI Bridge
(rev. 0x05)
pci4 at ppb1 bus 1
pci4: i/o space, memory space enabled
ppb2 at pci4 dev 0 function 0: Digital Equipment DC21154 PCI-PCI Bridge
(rev. 0x05)
pci5 at ppb2 bus 2
pci5: i/o space, memory space enabled
amr0 at pci5 dev 0 function 0: AMI RAID <PERC 3/DC>
amr0: interrupting at ioapic1 pin 4 (irq 11)
amr0: firmware 198U, BIOS 3.35, 128MB RAM
ld0 at amr0 unit 0: RAID 5, optimal
ld0: 34556 MB, 8776 cyl, 128 head, 63 sec, 512 bytes/sect x 70770688 sectors
isp0 at pci4 dev 1 function 0: QLogic Dual Channel Ultra-3 Wide SCSI HBA
isp0: interrupting at ioapic1 pin 5 (irq 5)
isp0: Polled Mailbox Command (0x8) Timeout
isp0: interrupt (ISR=4 SEMA=0) when not ready
isp0: interrupt (ISR=4 SEMA=0) when not ready
isp0: Polled Mailbox Command (0x32) Timeout
fxp1 at pci0 dev 8 function 0: i82559 Ethernet, rev 8
fxp1: interrupting at ioapic1 pin 2 (irq 11)
fxp1: Ethernet address 00:90:27:a4:f6:9b
inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 4
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vga1 at pci0 dev 14 function 0: ATI Technologies Rage XL (rev. 0x27)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 15 function 0
pcib0: ServerWorks OSB4 southbridge (rev. 0x50)
rccide0 at pci0 dev 15 function 1
rccide0: ServerWorks OSB4 IDE Controller (rev. 0x00)
rccide0: bus-master DMA support present
rccide0: primary channel configured to compatibility mode
rccide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at rccide0 channel 0
rccide0: secondary channel configured to compatibility mode
rccide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at rccide0 channel 1
ohci0 at pci0 dev 15 function 2: ServerWorks OSB4/CSB5 USB Host Controller
(rev. 0x04)
ohci0: interrupting at ioapic0 pin 10 (irq 10)
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ServerWorks OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
ioapic0: enabling
ioapic1: enabling
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
IPsec: Initialized Security Association Processing.
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <SAMSUNG CD-ROM SN-124, , q009> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(rccide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
(using DMA)
boot device: ld0
root on ld0a dumps on ld0b
root file system type: ffs
cpu1: CPU 0 running
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
diablo>