On Tue, Nov 15, 2005 at 06:57:55PM +0900, Curt Sampson wrote:
> On Tue, 15 Nov 2005, Curt Sampson wrote:
> 
> >Is anybody using a newer 2600-series T42, as opposed to the 2300 series?
> 
> Which, looking more closely at what I was looking at, means a T43
> instead of a T42. More duh.
> 
> So, any T43 users out there?
Yep! T43p... Here's the dmesg output. The thingy is fast and stable, but
I'm looking for a new _fast_ disk as the HTS548080 is "not so fast" ;-)
I've not played with suspend/resume yet, so I can't say if or how it's 
working...

Kurt

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 3.99.11 (PADDI_BSD_ACPI) #55: Mon Nov 14 20:22:55 MET 2005
	ks@ipaddi-bsd:/u/NetBSD/arch/i386/obj/sys/arch/i386/compile/PADDI_BSD_ACPI
total memory = 1022 MB
avail memory = 1000 MB
BIOS32 rev. 0 found at 0xfd760
mainbus0 (root)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel Pentium M (Dothan) (686-class), 2128.36 MHz, id 0x6d8
cpu0: features afe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features afe9fbff<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
cpu0: features afe9fbff<FXSR,SSE,SSE2,SS,TM,SBF>
cpu0: features2 180<EST,TM2>
cpu0: "Intel(R) Pentium(R) M processor 2.13GHz"
cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu0: L2 cache 2 MB 64B/line 8-way
cpu0: using thermal monitor 2
cpu0: Enhanced SpeedStep running at 1600 MHz (1356 mV)
cpu0: unknown Enhanced SpeedStep CPU
cpu0: calibrating local timer
cpu0: apic clock running at 133 MHz
cpu0: 64 page colors
ioapic0 at mainbus0 apid 1 (I/O APIC)
ioapic0: pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0
ioapic0: remapped to apic 1
acpi0 at mainbus0
acpi0: using Intel ACPI CA subsystem version 20050408
acpi0: X/RSDT: OemId <IBM   ,TP-1Y   ,00001230>, AslId < LTP,00000000>
acpi0: found ECDT, GPE 28
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpi: activated NSC1100
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PNP0C0E): ACPI Sleep Button
PNP0A08 [ACPI Three-wire Device Bus] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
attimer0 at acpi0 (PNP0100): AT Timer
attimer0: io 0x40-0x43 irq 0
PNP0200 [AT DMA Controller] at acpi0 not configured
PNP0800 [AT-style speaker sound] at acpi0 not configured
npx0 at acpi0 (PNP0C04)
npx0: io 0xf0 irq 13
npx0: using exception 16
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
pckbc0 at acpi0 (PNP0303): kbd port
pckbc0: io 0x60,0x64 irq 1
pckbc1 at acpi0 (IBM0057): aux port
pckbc1: irq 12
com0 at acpi0 (PNP0501)
com0: io 0x3f8-0x3ff irq 4
com0: ns16550a, working fifo
lpt0 at acpi0 (PNP0400)
lpt0: io 0x3bc-0x3be irq 7
NSC1100 at acpi0 not configured
acpiec0 at acpi0 (PNP0C09-0): ACPI Embedded Controller
acpiec0: io 0x62,0x66
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
acpibat0 at acpi0 (PNP0C0A-0): ACPI Battery (Control Method)
acpiacad0 at acpi0 (ACPI0003-0): ACPI AC Adapter
IBM0068 at acpi0 not configured
acpitz0 at acpi0: ACPI Thermal Zone
acpitz0: unable to get polling interval; using default of 30.0s
acpitz0: passive cooling mode only
acpitz0: critical 99.0C passive 40.0C
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82915PM/GM/GMS,82910GML Host Bridge (rev. 0x03)
ppb0 at pci0 dev 1 function 0: Intel 82915PM/GM PCI Express Graphics Port (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci1 dev 0 function 0: ATI Technologies product 0x3154 (rev. 0x80)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
ppb1 at pci0 dev 28 function 0: Intel 82801FB/FR PCI Express Port #0 (rev. 0x03)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
bge0 at pci2 dev 0 function 0: Broadcom BCM5751M Gigabit Ethernet
bge0: interrupting at ioapic0 pin 16 (irq 11)
bge0: ASIC BCM5751 A1 (0x4101), Ethernet address 00:11:25:b1:41:71
brgphy0 at bge0 phy 1: BCM5750 1000BASE-T media interface, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb2 at pci0 dev 28 function 2: Intel product 0x2664 (rev. 0x03)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
uhci0 at pci0 dev 29 function 0: Intel 82801FB/FR USB UHCI Controller (rev. 0x03)
uhci0: interrupting at ioapic0 pin 16 (irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801FB/FR USB UHCI Controller (rev. 0x03)
uhci1: interrupting at ioapic0 pin 17 (irq 11)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801FB/FR USB UHCI Controller (rev. 0x03)
uhci2: interrupting at ioapic0 pin 18 (irq 11)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3: Intel 82801FB/FR USB UHCI Controller (rev. 0x03)
uhci3: interrupting at ioapic0 pin 19 (irq 11)
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: Intel 82801FB/FR USB EHCI Controller (rev. 0x03)
ehci0: interrupting at ioapic0 pin 19 (irq 11)
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb3 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0xd3)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
cbb0 at pci4 dev 0 function 0: Ricoh 5C476 PCI-CardBus bridge (rev. 0x8d)
cbb0: using ioapic for interrupt
ath0 at pci4 dev 2 function 0
ath0: interrupting at ioapic0 pin 21 (irq 11)
ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: mac 5.9 phy 4.3 radio 3.6
cbb0: interrupting at ioapic0 pin 16 (irq 11)
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 5
pcmcia0 at cardslot0
auich0 at pci0 dev 30 function 2: i82801FB (ICH6) AC-97 Audio
auich0: interrupting at ioapic0 pin 22 (irq 5)
auich0: ac97: Analog Devices AD1981B codec; headphone, 20 bit DAC, no 3D stereo
auich0: ac97: ext id 601<AC97_22,AMAP,VRA>
pcib0 at pci0 dev 31 function 0
pcib0: Intel product 0x2641 (rev. 0x03)
piixide0 at pci0 dev 31 function 2
piixide0: Intel 82801FBM Serial ATA Controller (ICH6) (rev. 0x03)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at piixide0 channel 1
Intel 82801FB/FR SMBus Controller (SMBus serial bus, revision 0x03) at pci0 dev 31 function 3 not configured
isa0 at pcib0
ioapic0: enabling
auich0: measured ac97 link rate at 49468 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
IPsec: Initialized Security Association Processing.
wd0 at atabus0 drive 0: <HTS726060M9AT00>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 57231 MB, 116280 cyl, 16 head, 63 sec, 512 bytes/sect x 117210240 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
wd1 at atabus1 drive 0: <HTS548080M9AT00>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd1(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
boot device: wd1
root on wd1a dumps on wd1b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
Accounting started
ath0: link state changed to UP