Hello,

I'm using NetBSD 3.0 beta with an ASUS P5GD1-VM motherboard and I =20
have some problems to access devices (2 hard drives) plugged in the =20
secondary IDE connector of this card (called IDE1_PCI in the users =20
manual). Indeed, the secondary IDE informations don't appear in the =20
BIOS (but they're quickly displayed at boot time).

Here's my IDE config:
HD1: Primary IDE Master (boot netbsd)
HD2: Primary IDE Slave
HD3: Secondary IDE Master
HD4: Secondary IDE Slave

HD1 (/dev/wd0) and HD2 (/dev/wd1) are OK, but when I try to access /=20
dev/wd2 or /dev/wd3, I get:

root@termina# fdisk wd2
fdisk: /dev/rwd2d: Device not configured
root@termina# fdisk wd3
fdisk: /dev/rwd3d: Device not configured

Moreover, I noticed (in particular) these lines in the dmesg (the =20
entire dmesg is at the end of this mail):

pci5: i/o space, memory space enabled
Integrated Technology Express product 0x8211 (miscellaneous mass =20
storage, revision 0x11) at pci5 dev 3 function 0 not configured
*and*
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
Intel 82801FB/FR SMBus Controller (SMBus serial bus, revision 0x03) =20
at pci0 dev 31 function 3 not configured

I don't really understand what it means, but I tried to access /dev/=20
pci* devices. pci0 to pci5 display:

root@termina# fdisk /dev/pci5
fdisk: DIOCGDEFLABEL: Inappropriate ioctl for device
fdisk: DIOCGDINFO: Inappropriate ioctl for device

pci6 and pci7 display:

root@termina# fdisk /dev/pci6
fdisk: /dev/pci6: Device not configured
root@termina# fdisk /dev/pci7
fdisk: /dev/pci7: Device not configured

Note that ITEIDE is present in my kernel:
iteide*         at pci? dev ? function ?        # IT Express IDE =20
controllers

I think my card is not supported yet, but I'm not sure...
If it isn't, will it be ? Else, any idea to make it work ? :)

Thanks in advance, and sorry for my bad english :]

--=20
Gr=E9gory Thiell.


* * * * * * my dmesg * * * * * *

NetBSD 3.0_BETA (TERMINA.MP) #3: Wed Nov  9 12:29:32 CET 2005
	root@termina:/usr/obj/sys/arch/i386/compile/TERMINA.MP
total memory =3D 503 MB
avail memory =3D 484 MB
BIOS32 rev. 0 found at 0xf0010
mainbus0 (root)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel (686-class), 2992.72 MHz, id 0xf41
cpu0: features =20
bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 441d<SSE3,MONITOR,DS-CPL,CID,xTPR>
cpu0: "Intel(R) Pentium(R) 4 CPU 3.00GHz"
cpu0: I-cache 12K uOp cache 8-way
cpu0: L2 cache 1 MB 64B/line 8-way
cpu0: ITLB 4K/4M: 64 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: using thermal monitor 1
cpu0: calibrating local timer
cpu0: apic clock running at 199 MHz
cpu0: 32 page colors
cpu1 at mainbus0: apid 1 (application processor)
cpu1: starting
cpu1: Intel (686-class), 2992.51 MHz, id 0xf41
cpu1: features =20
bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu1: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu1: features2 441d<SSE3,MONITOR,DS-CPL,CID,xTPR>
cpu1: "Intel(R) Pentium(R) 4 CPU 3.00GHz"
cpu1: I-cache 12K uOp cache 8-way
cpu1: L2 cache 1 MB 64B/line 8-way
cpu1: ITLB 4K/4M: 64 entries
cpu1: DTLB 4K/4M: 64 entries
cpu1: using thermal monitor 1
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0
acpi0: using Intel ACPI CA subsystem version 20040211
acpi0: X/RSDT: OemId <A M I ,OEMRSDT ,08000405>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0A08 at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
PNP0100 [AT Timer] at acpi0 not configured
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
PNP0800 [AT-style speaker sound] at acpi0 not configured
PNP0C04 [Math Coprocessor] at acpi0 not configured
PNP0700 [PC standard floppy disk controller] at acpi0 not configured
PNP0401 [ECP printer port] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not =20
configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not =20
configured
INT0800 at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not =20
configured
PNP0303 [IBM Enhanced (101/102-key, PS/2 mouse support)] at acpi0 not =20=

configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not =20
configured
PNP0501 [16550A-compatible COM port] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not =20
configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not =20
configured
PNP0C01 [System Board] at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C-170): ACPI Power Button
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82915P/G/GL Host (rev. 0x04)
vga1 at pci0 dev 2 function 0: Intel 82915G/GL Integrated Graphics =20
Device (rev. 0x04)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
Intel 82915G/GL IGD Companion (miscellaneous display, revision 0x04) =20
at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio =20
Controller
azalia0: interrupting at ioapic0 pin 16 (irq 10)
azalia0: host: 82801FB/FR High Definition Audio Controller (rev. 3)
azalia0: host: High Definition Audio rev. 1.0
ppb0 at pci0 dev 28 function 0: Intel 82801FB/FR PCI Express Port #0 =20
(rev. 0x03)
pci1 at ppb0 bus 5
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: Intel 82801FB/FR PCI Express Port #1 =20
(rev. 0x03)
pci2 at ppb1 bus 4
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 2: Intel product 0x2664 (rev. 0x03)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 28 function 3: Intel product 0x2666 (rev. 0x03)
pci4 at ppb3 bus 2
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
uhci0 at pci0 dev 29 function 0: Intel 82801FB/FR USB UHCI Controller =20=

(rev. 0x03)
uhci0: interrupting at ioapic0 pin 23 (irq 10)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801FB/FR USB UHCI Controller =20=

(rev. 0x03)
uhci1: interrupting at ioapic0 pin 19 (irq 3)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801FB/FR USB UHCI Controller =20=

(rev. 0x03)
uhci2: interrupting at ioapic0 pin 18 (irq 5)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3: Intel 82801FB/FR USB UHCI Controller =20=

(rev. 0x03)
uhci3: interrupting at ioapic0 pin 16 (irq 10)
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ppb4 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0xd3)
pci5 at ppb4 bus 1
pci5: i/o space, memory space enabled
Integrated Technology Express product 0x8211 (miscellaneous mass =20
storage, revision 0x11) at pci5 dev 3 function 0 not configured
fxp0 at pci5 dev 8 function 0: Intel 82562EZ (ICH6), rev 3
fxp0: interrupting at ioapic0 pin 20 (irq 11)
fxp0: Ethernet address 00:11:d8:02:56:54
inphy0 at fxp0 phy 1: i82562ET 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
re0 at pci5 dev 10 function 0: RealTek 8169S Single-chip Gigabit =20
Ethernet
re0: interrupting at ioapic0 pin 22 (irq 10)
re0: Ethernet address 00:0f:b5:42:77:32
re0: using 256 tx descriptors
ukphy0 at re0 phy 7: Generic IEEE 802.3u media interface
ukphy0: RTL8169S/8110S 1000BASE-T media interface (OUI 0x00e04c, =20
model 0x0011), rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, =20
1000baseT-FDX, auto
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801FB LPC Interface Bridge (rev. 0x03)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801FB IDE Controller (ICH6) (rev. 0x03)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
Intel 82801FB/FR SMBus Controller (SMBus serial bus, revision 0x03) =20
at pci0 dev 31 function 3 not configured
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
ioapic0: enabling
azalia0: codec: 0x10ec/0x0880 (rev. 5.0)
azalia0: codec: High Definition Audio rev. 0.9
azalia0: playback: encodings=3D1<PCM>
azalia0: playback: PCM formats=3De0160<24bit,20bit,16bit,96kHz,48kHz,=20
44.1kHz>
azalia0: playback: max channels=3D2
azalia0: recording: encodings=3D1<PCM>
azalia0: recording: PCM formats=3D60160<20bit,16bit,96kHz,48kHz,44.1kHz>
azalia0: recording: max channels=3D2
audio0 at azalia0: full duplex, independent
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <MAXTOR 6L040J2>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38172 MB, 77557 cyl, 16 head, 63 sec, 512 bytes/sect x 78177792 =20
sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1 at atabus0 drive 1: <Maxtor 6Y160P0>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 152 GB, 317632 cyl, 16 head, 63 sec, 512 bytes/sect x 320173056 =20
sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) =20
(using DMA)
wd1(piixide0:0:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) =20
(using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
cpu1: CPU 1 running
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)