Hi All,

I have not yet heard of a booting success on a Pentium D machine.  I 
just got a Gateway E4500 tower with an 830 today and it works!  I am 
using -current from today with the GENERIC.MPACPI kernel, no changes. 
The only thing that doesn't work is the onboard BCM5752 ethernet; I have 
yet to test if I can get it running using the bge driver so I just threw 
an old 3C905 in the machine.  Everything else is as-shipped.

Here's the weird thing, though: dmesg is full of junk at the beginning 
and end, both when I say "dmesg" and in /var/run/dmesg.boot.  Just pages 
and pages of "^?M" over and over, and they cut off the end of my dmesg. 
  Very odd.  Any thoughts?

-Henry Bent

--

NetBSD 3.99.11 (GENERIC.MPACPI) #0: Wed Nov  2 17:38:13 EST 2005
 
root@hbent2:/usr/obj/src-current/sys/arch/i386/compile/GENERIC.MPACPI
total memory = 2045 MB
avail memory = 2001 MB
RTC BIOS diagnostic error 80<clock_battery>
mainbus0 (root)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel (686-class), 3000.08 MHz, id 0xf44
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 649d<SSE3,MONITOR,DS-CPL,EST,CID,xTPR>
cpu0: features3 20100000<EM64T>
cpu0: "Intel(R) Pentium(R) D CPU 3.00GHz"
cpu0: I-cache 12K uOp cache 8-way
cpu0: L2 cache 1 MB 64B/line 8-way
cpu0: ITLB 4K/4M: 128 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: using thermal monitor 1
cpu0: Enhanced SpeedStep running at 1500 MHz (1372 mV)
cpu0: unknown Enhanced SpeedStep CPU
cpu0: calibrating local timer
cpu0: apic clock running at 199 MHz
cpu0: 32 page colors
cpu1 at mainbus0: apid 1 (application processor)
cpu1: starting
cpu1: Intel (686-class), 2999.90 MHz, id 0xf44
cpu1: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu1: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu1: features2 649d<SSE3,MONITOR,DS-CPL,EST,CID,xTPR>
cpu1: features3 20100000<EM64T>
cpu1: "Intel(R) Pentium(R) D CPU 3.00GHz"
cpu1: I-cache 12K uOp cache 8-way
cpu1: L2 cache 1 MB 64B/line 8-way
cpu1: ITLB 4K/4M: 128 entries
cpu1: DTLB 4K/4M: 64 entries
cpu1: using thermal monitor 1
cpu1: Enhanced SpeedStep running at 1500 MHz (1372 mV)
cpu1: unknown Enhanced SpeedStep CPU
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0
ioapic0: remapped to apic 2
acpi0 at mainbus0
acpi0: using Intel ACPI CA subsystem version 20050408
acpi0: X/RSDT: OemId <GATEWA,05DT048 ,000000ad>, AslId <MSFT,01000013>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
mpacpi: could not get bus number, assuming bus 0
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpibut0 at acpi0 (PNP0C0E): ACPI Sleep Button
PNP0A03 [PCI Bus] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not 
configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
npx0 at acpi0 (PNP0C04)
npx0: io 0xf0 irq 13
npx0: using exception 16
attimer1 at acpi0 (PNP0100): AT Timer
attimer1: io 0x40-0x43,0x50-0x53 irq 0
pcppi1 at acpi0 (PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not 
configured
fdc0 at acpi0 (PNP0700)
fdc0: io 0x3f0-0x3f5,0x3f0 irq 6 drq 2
fdc0: unable to map ctl i/o space
lpt0 at acpi0 (PNP0400)
lpt0: io 0x378-0x37f irq 7
pckbc0 at acpi0 (PNP0303): kbd port
pckbc0: io 0x60,0x64 irq 1
com0 at acpi0 (PNP0501-1)
com0: io 0x3f8-0x3ff irq 4
com0: ns16550a, working fifo
PNP0003 [APIC] at acpi0 not configured
pcppi1: attached to attimer1
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0:

--

00:00.0 Host bridge: Intel Corporation 945G/P Memory Controller Hub (rev 02)
00:01.0 PCI bridge: Intel Corporation 945G/P PCI Express Graphics Port 
(rev 02)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High 
Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express 
Port 1 (rev 01)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express 
Port 3 (rev 01)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express 
Port 4 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI 
#1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI 
#2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI 
#3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI 
#4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI 
Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC 
Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE 
Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) 
Serial ATA Storage Controllers cc=IDE (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller 
(rev 01)
01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 
6600] (rev a2)
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5752 
Gigabit Ethernet PCI Express (rev 01)
05:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host 
Controller (rev 46)
05:01.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] 
(rev 30)