Subject: Re: TV-Card TerraTValue - no sound
To: Jared D. McNeill <jmcneill@invisible.ca>
From: Timo Schmidt <netbsd@xomit.de>
List: port-i386
Date: 01/28/2005 21:42:34
On Fri 28 Jan 2005 13:09 -0400, Jared D. McNeill wrote:
>
> On Fri, 2005-01-28 at 17:48 +0100, Timo Schmidt wrote:
>
> [snip]
> > With both configurations, the following line appears in
> > dmesg:
> >=20
> > | Brooktree Bt878 Video Capture (Audio Section) (miscellaneous multimed=
ia, revision 0x02) at pci0 dev 11 function 1 not configured
> >=20
> > Both, fxtv and xawtv (compiled from current pkgsrc) comes up
> > with correct video but no sound.
> >=20
> > System in question is:
> >=20
> > | # uname -mprs
> > | NetBSD 2.0 i386 i386
> >=20
> > Did I miss something or is NetBSD not fully supporting
> > this TV card currently?
>=20
> The audio capture portion of the card isn't currently
> supported.=20

Ok.


> You can still run an analog audio cable from the output on
> your bktr card (either internal or external) into an input
> of your audio card to capture sound that way.

I've already done this. I'm running an analog audio cable
=66rom =BBaudio out=AB of the bktr card into =BBline in=AB of my audio
card. But still no sound.


> Ross Roskins had begun work on an aubktr(4) driver to
> support the audio capture portion of these cards (see
> http://www.elfin.net/netbsd/aubktr/ for details). It seems
> that he was unable to get audio to capture properly.

Thanks for the pointer.

  -Timo