Subject: Re: PERC4/SC RAID compatibility
To: Martti Kuparinen <martti.kuparinen@iki.fi>
From: Cameron Brown <cameron@amitconsulting.info>
List: port-i386
Date: 10/24/2004 12:47:31
This is a multi-part message in MIME format.

------=_NextPart_000_00A9_01C4B9C7.A105F850
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

So far, the installation is just fine.  Which sets should I use?  =
-current I am assuming, but just to be sure...

Once I get the sets and benchmark installed and running 24-hours - I =
will give you a heads up.

Thanks,
Cameron




----- Original Message -----=20
From: "Martti Kuparinen" <martti.kuparinen@iki.fi>
To: "Cameron Brown" <cameron@amitconsulting.info>
Cc: <current-users@NetBSD.org>; <port-i386@NetBSD.org>
Sent: Saturday, October 23, 2004 1:28 PM
Subject: Re: PERC4/SC RAID compatibility


> On Fri, 22 Oct 2004, Cameron Brown wrote:
>=20
>> It does seem to me that everything is properly selected for RAID
>=20
> Okay. Can you try now with the new boot images [1] and let me know
> how it works? And send dmesg if the controller is detected.
>=20
> If your controller is detected maybe you can install the whole =
operating
> system [2] and install bonnie from /usr/pkgsrc/benchmarks/bonnie. Then
> run something like this for 24 hrs:
>=20
> #!/bin/sh
> cd /var/tmp
> while [ 1 ]
> do
>   bonnie -s 1000
>   sleep 600
> done
>=20
> If your system is still running without any errors I'll commit the
> modifications I made...
>=20
> Martti
>=20
>=20
> [1] http://users.piuha.net/martti/tmp/boot1.fs and
>     http://users.piuha.net/martti/tmp/boot2.fs
>=20
>     or
>=20
>     http://users.piuha.net/martti/tmp/boot-big.fs
>=20
> [2] http://users.piuha.net/martti/tmp/netbsd.iso
>
------=_NextPart_000_00A9_01C4B9C7.A105F850
Content-Type: text/plain;
	name="PERC4SC.TXT"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
	filename="PERC4SC.TXT"

NetBSD 2.99.10 (INSTALL) #0: Sat Oct 23 14:30:49 EEST 2004=0A=
	root@n118.nissenrinne.fi:/usr/obj/usr/src/sys/arch/i386/compile/INSTALL=0A=
total memory =3D 1023 MB=0A=
avail memory =3D 992 MB=0A=
BIOS32 rev. 0 found at 0xffe90=0A=
mainbus0 (root)=0A=
cpu0 at mainbus0: (uniprocessor)=0A=
cpu0: Intel (686-class), 2800.25 MHz, id 0xf34=0A=
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>=0A=
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>=0A=
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>=0A=
cpu0: features2 441d<SSE3,MONITOR,DS-CPL,CID>=0A=
cpu0: "Intel(R) Pentium(R) 4 CPU 2.80GHz"=0A=
cpu0: I-cache 12K uOp cache 8-way=0A=
cpu0: L2 cache 1 MB 64B/line 8-way=0A=
cpu0: ITLB 4K/4M: 64 entries=0A=
cpu0: DTLB 4K/4M: 64 entries=0A=
cpu0: running without thermal monitor!=0A=
cpu0: 32 page colors=0A=
pci0 at mainbus0 bus 0: configuration mode 1=0A=
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok=0A=
pchb0 at pci0 dev 0 function 0=0A=
pchb0: vendor 0x8086 product 0x2578 (rev. 0x02)=0A=
ppb0 at pci0 dev 3 function 0: vendor 0x8086 product 0x257b (rev. 0x02)=0A=
pci1 at ppb0 bus 1=0A=
pci1: i/o space, memory space enabled=0A=
wm0 at pci1 dev 1 function 0: Intel i82547GI 1000BASE-T Ethernet, rev. 0=0A=
wm0: interrupting at irq 3=0A=
wm0: Communication Streaming Architecture=0A=
wm0: 64 word (6 address bits) MicroWire EEPROM=0A=
wm0: Ethernet address 00:0f:1f:f7:5d:42=0A=
igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0=0A=
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, =
1000baseT-FDX, auto=0A=
ppb1 at pci0 dev 28 function 0: vendor 0x8086 product 0x25ae (rev. 0x02)=0A=
pci2 at ppb1 bus 2=0A=
pci2: i/o space, memory space enabled, rd/line, wr/inv ok=0A=
amr0 at pci2 dev 1 function 0: AMI RAID <PERC 4/SC>=0A=
amr0: interrupting at irq 11=0A=
amr0: firmware 350O, BIOS 1.09, 64MB RAM=0A=
ld0 at amr0 unit 0: RAID 1, optimal=0A=
ld0: 69880 MB, 8908 cyl, 255 head, 63 sec, 512 bytes/sect x 143114240 =
sectors=0A=
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x25a9 (rev. 0x02)=0A=
uhci0: interrupting at irq 11=0A=
usb0 at uhci0: USB revision 1.0=0A=
uhub0 at usb0=0A=
uhub0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub0: 2 ports with 2 removable, self powered=0A=
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x25aa (rev. 0x02)=0A=
uhci1: interrupting at irq 10=0A=
usb1 at uhci1: USB revision 1.0=0A=
uhub1 at usb1=0A=
uhub1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub1: 2 ports with 2 removable, self powered=0A=
vendor 0x8086 product 0x25ab (miscellaneous system, revision 0x02) at =
pci0 dev 29 function 4 not configured=0A=
vendor 0x8086 product 0x25ac (interrupt system, interface 0x20, revision =
0x02) at pci0 dev 29 function 5 not configured=0A=
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x25ad (rev. 0x02)=0A=
ehci0: interrupting at irq 7=0A=
ehci0: EHCI version 1.0=0A=
ehci0: companion controllers, 2 ports each: uhci0 uhci1=0A=
usb2 at ehci0: USB revision 2.0=0A=
uhub2 at usb2=0A=
uhub2: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1=0A=
uhub2: single TT=0A=
uhub2: 4 ports with 4 removable, self powered=0A=
ppb2 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0x0a)=0A=
pci3 at ppb2 bus 3=0A=
pci3: i/o space, memory space enabled=0A=
wm1 at pci3 dev 2 function 0: Intel i82541GI 1000BASE-T Ethernet, rev. 0=0A=
wm1: interrupting at irq 10=0A=
wm1: 32-bit 33MHz PCI bus=0A=
wm1: 64 word (6 address bits) MicroWire EEPROM=0A=
wm1: Ethernet address 00:0f:1f:f7:5d:43=0A=
igphy1 at wm1 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0=0A=
igphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, =
1000baseT-FDX, auto=0A=
ukphy0 at wm1 phy 2: Generic IEEE 802.3u media interface=0A=
ukphy0: OUI 0x000000, model 0x0000, rev. 0=0A=
ukphy0: no media present=0A=
vga1 at pci3 dev 14 function 0: vendor 0x1002 product 0x4752 (rev. 0x27)=0A=
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)=0A=
wsmux1: connecting to wsdisplay0=0A=
pcib0 at pci0 dev 31 function 0=0A=
pcib0: vendor 0x8086 product 0x25a1 (rev. 0x02)=0A=
piixide0 at pci0 dev 31 function 2=0A=
piixide0: Intel 6300ESB Serial ATA Controller (rev. 0x02)=0A=
piixide0: bus-master DMA support present=0A=
piixide0: primary channel configured to compatibility mode=0A=
piixide0: primary channel interrupting at irq 14=0A=
atabus0 at piixide0 channel 0=0A=
piixide0: secondary channel configured to compatibility mode=0A=
piixide0: secondary channel interrupting at irq 15=0A=
atabus1 at piixide0 channel 1=0A=
vendor 0x8086 product 0x25a4 (SMBus serial bus, revision 0x02) at pci0 =
dev 31 function 3 not configured=0A=
isa0 at pcib0=0A=
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo=0A=
pckbc0 at isa0 port 0x60-0x64=0A=
pckbd0 at pckbc0 (kbd slot)=0A=
pckbc0: using irq 1 for kbd slot=0A=
wskbd0 at pckbd0: console keyboard, using wsdisplay0=0A=
pcppi0 at isa0 port 0x61=0A=
sysbeep0 at pcppi0=0A=
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support=0A=
npx0 at isa0 port 0xf0-0xff: using exception 16=0A=
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2=0A=
isapnp0: no ISA Plug 'n Play devices found=0A=
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec=0A=
Kernelized RAIDframe activated=0A=
md0: internal 5000 KB image area=0A=
atapibus0 at atabus0: 2 targets=0A=
cd0 at atapibus0 drive 0: <TEAC CD-ROM CD-224E, , K.9A> cdrom removable=0A=
cd0: 32-bit data port=0A=
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)=0A=
cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using =
DMA data transfers)=0A=
boot device: fd0=0A=
root on md0a dumps on md0b=0A=
root file system type: ffs=0A=
warning: no /dev/console=0A=

------=_NextPart_000_00A9_01C4B9C7.A105F850--