Subject: Re: fxp issues
To: Werner Backes <werner@bit-1.de>
From: David Brownlee <abs@NetBSD.org>
List: port-i386
Date: 07/20/2004 18:28:19
On Tue, 20 Jul 2004, Werner Backes wrote:

> Sean Davis wrote:
>> Has anybody had this particular issue before?
>
> Yes, I can see this on an embedded (PC/104) system with onboard fxp
> NIC and NetBSD 2.0.E. The link goes down every 16-17 seconds, but only
> if there is no traffic. If I ping the interface from the outside, the
> link doesn't go down. This is a minimal installation with only the
> (custom) kernel and same binaries and it's netbooted. Here is my dmesg
> output:

 	Are you running at 10base10?

 	We have a dual fxp card that is fine at 100baseT but had many timeouts
 	and issues at 10base:

ppb1 at pci1 dev 6 function 0: Digital Equipment DECchip 21152 PCI-PCI Bridge (rev. 0x03)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
fxp0 at pci2 dev 4 function 0: i82558 Ethernet, rev 5
fxp0: interrupting at irq 11
fxp0: Ethernet address 00:d0:b7:b9:26:79
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1 at pci2 dev 5 function 0: i82558 Ethernet, rev 5
fxp1: interrupting at irq 12
fxp1: Ethernet address 00:d0:b7:b9:26:7a
inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 0
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto






-- 
 		David/absolute       -- www.NetBSD.org: No hype required --