Hi Quentin [at.cubidou.net],

First of all, thanks for your help. This is so embarrassing... I forgot 
the BETA version. :-(

Well, now I have this dmesg info:
--- bof -------------------------
NetBSD 2.0_BETA (HEAVEN) #1: Sat May  1 17:40:43 UTC 2004
         root@heaven:/usr/source/sys/arch/i386/compile/obj/HEAVEN
total memory = 447 MB
avail memory = 432 MB
BIOS32 rev. 0 found at 0xfdae0
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium 4 (686-class), 1696.39 MHz, id 0xf12
cpu0: features 3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 3febf9ff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features 3febf9ff<FXSR,SSE,SSE2,SS,HTT,TM>
cpu0: I-cache 12K uOp cache 8-way, D-cache 8 KB 64b/line 4-way
cpu0: L2 cache 256 KB 64b/line 8-way
cpu0: ITLB 4K/4M: 64 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: 8 page colors
acpi0 at mainbus0
acpi0: using Intel ACPI CA subsystem version 20040211
acpi0: X/RSDT: OemId <AMIINT,SiS645XX,00000010>, AslId <MSFT,0100000b>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpi: activated PNP0C0F
acpi: activated PNP0C0F
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch
PNP0A03 [PCI Bus] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
PNP0100 [AT Timer] at acpi0 not configured
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
PNP0800 [AT-style speaker sound] at acpi0 not configured
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: using exception 16
pckbc1 at acpi0 (PNP0F03): aux port
pckbc1: irq 12
pckbc2 at acpi0 (PNP0303): kbd port
pckbc2: io 0x60,0x64 irq 1
WEC0510 at acpi0 not configured
lpt3 at acpi0 (PNP0401)
lpt3: io 0x378-0x37f,0x778-0x77b irq 7 drq 3
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc2 (aux slot)
pckbc2: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Silicon Integrated System SiS 650 Host Bridge (rev. 0x01)
agp0 at pchb0: aperture at 0xe0000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Silicon Integrated System 86C201 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: Silicon Integrated System 6325 AGP VGA 
(rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 2 function 0
pcib0: Silicon Integrated System 85C503 or 5597/5598 ISA bridge (rev. 0x00)
siside0 at pci0 dev 2 function 5
siside0: Silicon Integrated System 650 IDE controller (rev. 0xd0)
siside0: bus-master DMA support present
siside0: primary channel wired to compatibility mode
siside0: primary channel interrupting at irq 14
atabus0 at siside0 channel 0
siside0: secondary channel wired to compatibility mode
siside0: secondary channel interrupting at irq 15
atabus1 at siside0 channel 1
auich0 at pci0 dev 2 function 7: SiS 7012 AC-97 Audio
auich0: interrupting at irq 10
auich0: ac97: Avance Logic ALC200/ALC201 codec; headphone, 18 bit DAC, 
18 bit ADC, Realtek 3D
auich0: ac97: ext id 605<AC97_22,AMAP,SPDIF,VRA>
sip0 at pci0 dev 3 function 0: SiS 900 10/100 Ethernet, rev 0x90
sip0: interrupting at irq 5
sip0: Ethernet address 00:50:eb:05:82:72
ukphy0 at sip0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000004, model 0x0020, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Conexant Systems product 0x2f00 (miscellaneous communications, revision 
0x01) at pci0 dev 5 function 0 not configured
VIA Technologies VT3606 OHCI IEEE 1394 Controller (Firewire serial bus, 
interface 0x10, revision 0x46) at pci0 dev 7 function 0 not configured
uhci0 at pci0 dev 8 function 0: VIA Technologies VT83C572 USB Controller 
(rev. 0x50)
uhci0: interrupting at irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 8 function 1: VIA Technologies VT83C572 USB Controller 
(rev. 0x50)
uhci1: interrupting at irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
VIA Technologies VT8237 EHCI USB Controller (USB serial bus, interface 
0x20, revision 0x51) at pci0 dev 8 function 2 not configured
isa0 at pcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
isapnp0: no ISA Plug 'n Play devices found
auich0: measured ac97 link rate at 48006 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
Kernelized RAIDframe activated
uhub0: port error, restarting port 1
uhub0: port error, restarting port 2
uhub0: port error, giving up port 2
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: Adomax USB/PS2 Scroll Mouse, rev 1.10/0.00, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
uhub1: port error, restarting port 2
uhub1: port error, giving up port 2
wd0 at atabus0 drive 0: <FUJITSU MHR2020AT>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 19077 MB, 38760 cyl, 16 head, 63 sec, 512 bytes/sect x 39070080 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(siside0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using 
DMA data transfers)
atapibus0 at atabus1: 2 targets
siside0:1:0: lost interrupt
         type: ata tc_bcount: 512 tc_skip: 0
cd0 at atapibus0 drive 0: <QSI CD-RW/DVD-ROM SBW-081, , NK01> cdrom 
removable
siside0:1:0: lost interrupt
         type: ata tc_bcount: 512 tc_skip: 0
siside0:1:0: lost interrupt
         type: ata tc_bcount: 512 tc_skip: 0
cd0: 32-bit data port
siside0:1:0: lost interrupt
         type: ata tc_bcount: 0 tc_skip: 0
cd0: drive supports PIO mode 4siside0:1:0: lost interrupt
         type: ata tc_bcount: 0 tc_skip: 0
, DMA mode 2siside0:1:0: lost interrupt
         type: ata tc_bcount: 0 tc_skip: 0
, Ultra-DMA mode 2 (Ultra/33)
cd0(siside0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using 
DMA data transfers)
(...)
--- eof -------------------------

I have doubts about these messages:
- (...) acpi0 not configured;
- (Firewire serial bus, interface 0x10, revision 0x46) ... not configured;
- uhub0: port error, restarting port 1
   uhub0: port error, restarting port 2
   uhub0: port error, giving up port 2
May I configure that devices and fix the "uhub port error"?

"siside0:1:0: lost interrupt"
   http://mail-index.netbsd.org/netbsd-bugs/2004/04/12/0000.html
   kern/25145: ATAPI CD drives on SiS735/745 Chips are not unsable
Is there a patch to fix this?

Again, thank you Quentin for your help.

Cheers,

-fmac



cube@cubidou.net wrote:
> On Thu, Apr 08, 2004 at 10:42:46AM -0300, fm-nospam@fmachado.com wrote:
> 
>>I've a (detected) SiS900 ethernet card in my desknote ("Onboard full duplex 10/100
>>Base-T Ethernet, MAC : SiS 961 built-in"). The onboard SiS900 still not working.r
>>After many patches/fixes/kicks I'm giving up.
>>
>>http://www.netbsd.org/cgi-bin/query-pr-single.pl?number=18590
>>Read and understand WHY you must NOT buy SiSxxx "things".
>>
>>http://freeunix.dyndns.org:8088/site2/hwchange.shtml < I can not buy another card :-(
>>
>>---dmesg------------------
>>...
>>sip0 at pci0 dev 3 function 0: SiS 900 10/100 Ethernet, rev 0x90
>>sip0: interrupting at irq 5
>>sip0: Ethernet address 00:50:eb:05:82:72
>>... (no phy) ...
>>---dmesg------------------
>>
>>Anyway, any help will be appreciated.
> 
> 
> Which NetBSD version is this?  Did you try -current or 2.0_BETA?
> 
> Quentin Garnier.
> 
>