--=-=-=

Hello,

I' ve just tried restarting an old Server 85 with boot-ps2.fs (1.6.2),
as the ps/2 support page states, neither the fast_scsi controller nor
the embedded one are supported, but one thing made me scratch my head,
only the fast_scsi controller is probed, not the embedded.

Is this normal ?

The ps/2 support page tells about ibm mca scsi card support under work,
is there any progress in this area ?

dmesg without fast scsi controller :

--=-=-=
Content-Disposition: inline; filename=dmesg.txt

NetBSD 1.6.2 (INSTALL_PS2) #0: Tue Feb 10 22:27:46 UTC 2004
autobuild@tgm.netbsd.org:/autobuild/netbsd-1-6-PATCH002/i386/OBJ/autobuild/netbsd-1-6-PATCH002/src/sys/arch/i386/compile/INSTALL_PS2
cpu0: AMD Am5x86 W/T 133/160 (486-class)
cpu0: features 1<FPU>
total memory = 40572 KB
avail memory = 34412 KB
using 532 buffers containing 2128 KB of memory
mainbus0 (root)
mca0 at mainbus0
ep0 at mca0 slot 1 irq 3: 3Com 3c529-TP Ethernet Adapter
ep0: address 00:60:8c:56:e4:b0, 8KB byte-wide FIFO, 3:1 Rx:Tx split
ep0: 10baseT, 10base5 (default 10base5)
mca0 slot 5: product 0x90ee not configured
isa0 at mainbus0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux ignored): console keyboard
vga0 at isa0 port 0x3b0-0x3df iomem 0xa0000-0xbffff
wsdisplay0 at vga0 (kbdmux ignored): console (80x25, vt100 emulation), using wskbd0
wsdisplay0: screen 1-3 added (80x25, vt100 emulation)
lpt0 at isa0 port 0x3bc-0x3bf irq 7
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
biomask ff65 netmask ff6d ttymask ffef
md0: internal 1440 KB image area
boot device: fd0
root on md0a dumps on md0b
root file system type: ffs
warning: no /dev/console

--=-=-=


dmesg with fast scsi controller :

--=-=-=
Content-Disposition: inline; filename=dmesg.fast_scsi.txt

NetBSD 1.6.2 (INSTALL_PS2) #0: Tue Feb 10 22:27:46 UTC 2004
autobuild@tgm.netbsd.org:/autobuild/netbsd-1-6-PATCH002/i386/OBJ/autobuild/netbsd-1-6-PATCH002/src/sys/arch/i386/compile/INSTALL_PS2
cpu0: AMD Am5x86 W/T 133/160 (486-class)
cpu0: features 1<FPU>
total memory = 40572 KB
avail memory = 34412 KB
using 532 buffers containing 2128 KB of memory
mainbus0 (root)
mca0 at mainbus0
ep0 at mca0 slot 1 irq 3: 3Com 3c529-TP Ethernet Adapter
ep0: address 00:60:8c:56:e4:b0, 8KB byte-wide FIFO, 3:1 Rx:Tx split
ep0: 10baseT, 10base5 (default 10base5)
mca0 slot 3: IBM Fast SCSI-2 Adapter (0x8efc) not configured
mca0 slot 5: product 0x90ee not configured
isa0 at mainbus0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux ignored): console keyboard
vga0 at isa0 port 0x3b0-0x3df iomem 0xa0000-0xbffff
wsdisplay0 at vga0 (kbdmux ignored): console (80x25, vt100 emulation), using wskbd0
wsdisplay0: screen 1-3 added (80x25, vt100 emulation)
lpt0 at isa0 port 0x3bc-0x3bf irq 7
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
biomask ff65 netmask ff6d ttymask ffef
md0: internal 1440 KB image area
boot device: fd0
root on md0a dumps on md0b
root file system type: ffs
warning: no /dev/console

--=-=-=


Regards

Eric Masson

-- 
 si c bien le k
 -+-YT in GNU: mon clavier est kc -+-

--=-=-=--