Ok, here's my dmesg.  I don't really see anything that helps me figure it 
out, but maybe it being 3 AM has just blinded me to stuff.  Any help you 
guys can give me is appreciated.


NetBSD 1.6ZG (INSTALL_LAPTOP) #0: Sun Jan 25 07:52:54 UTC 2004
               cyber@tgm.netbsd.org:/autobuild/HEAD/i386/OBJ/autobuild/HEAD/src/sys/arch/i386/compile/INSTALL_LAPTOP
total memory = 127 MB
avail memory = 117 MB
BIOS32 rev. 0 found at 0xfd8a0
PCI BIOS rev. 2.1 found at 0xfd9be
PCI IRQ Routing Table rev. 1.0 found at 0xfdf50, size 144 bytes (7 entries)
PCI Interrupt Router at 000:07:0 (vendor 0x8086 product 0x122e)
pci_addr_fixup: 000:04:0 0x104c 0xac51 new address 0x080000000
pci_addr_fixup: 000:04:1 0x104c 0xac51 new address 0x080001000
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Celeron (686-class), 796.59 MHz, id 0x68a
cpu0: features 383f9ff <FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 383f9ff <PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 383f9ff <FXSR,SSE>
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 4-way
cpu0: L2 cache 128 KB 32b/line 4-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x7190 (rev. 0x03)
agp at pchb0 not configured
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x7191 (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 1 function 0: vendor 0x5333 product 0x8c12 (rev. 0x13)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
cbb0 at pci0 dev 4 function 0: vendor 0x104c product 0xac51 (rev. 0x00)
cbb1 at pci0 dev 4 function 1: vendor 0x104c product 0xac51 (rev. 0x00)
pcib0 at pci0 dev 7 function 0
pcib0: vendor 0x8086 product 0x7110 (rev. 0x02)
piixide0 at pci0 dev7 function 1
piixide0: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 7 function 2: vendor 0x8086 product 0x7112 (rev. 0x01)
uhci0: interrupting at irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
vendor 0x8086 product 0x7113 (miscellaneous bridge, revision 0x03) at pci0 
dev 7 function 3 not configured
vendor 0x125d product 0x1988 (audio multimedia, revision 0x12) at pci0 dev 
8 function 0 not configured
vendor 0x125d product 0x1989 (miscellaneous communications, revision 0x12) 
at pci0 dev 8 function 1 not configured
tlp0 at pci0 dev 16 function 0: ADMtek AN985 Ethernet, pass 1.1
tlp0: interrupting at irq 11
tlp0: Ethernet address 00:d0:59:7a:2e:d5
ukphy0 at tlp0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0010a9, model 0x0001, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cbb0: interrupting at irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0
pcmcia0 at cardslot0
cbb1: interrupting at irq 11
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0
pcmcia1 at cardslot1
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
md0: internal 5000 KB image area
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <CD-244E, , 1.7A> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA 
data transfers)
an0 at pcmcia0 function 0: Cisco Systems, 350 Series Wireless LAN Adapter
an0: read record failed
an0: failed to attach controller
boot device: fd0
root on md0a dumps on md0b
root file system type: ffs
warning: no /dev/console

At 02:26 AM 3/10/2004, you wrote:
>On Wed, Mar 10, 2004 at 02:21:23AM -0600, Jayme A Howard wrote:
>
> > an0 at pcmcia0 function 0: Cisco Systems, 350 Series Wireless LAN Adapter
> > an0: read record failed
> > an0: failed to attach controller
>
>This seems like a problem with pcmcia/cardbus on your machine
>generally - attaching some more of the dmesg would help show this.
>You probably need to use some acpi on your machine to enable the
>cardbus or get the interrupt mappings right.
>
>--
>Dan.