Hi.

I'm experiencing problems with my Toshiba Satellite 410CDT. The machine 
reproducible freezes when sending something special over the network, 
like telnet to a VMS host or doing "X -query <somehost>".
I think that it is not the DEPCM card, because I had the same problem 
with a Lucent Orinoco Gold WLAN card.
I also tried playing with different kernel configs, like 
PCIC_ISA_ALLOC_IOBASE, PCIC_ISA_ALLOC_IOSIZE and APM tweaks, with no 
success.
When the machine freezes there is no console reaction, it does not reply 
to ICMP pings etc.
Others also reported the same problem 6 weeks ago on this list.

I would really like to assist whomsoever to solve this problem, because 
I don't want to install Linux :-)

Regards

Felix



dmesg output:

NetBSD 1.6.2 (GENERIC_LAPTOP) #0: Tue Feb 10 22:02:37 UTC 2004
 
autobuild@tgm.netbsd.org:/autobuild/netbsd-1-6-PATCH002/i386/OBJ/autobuild/n
etbsd-1-6-PATCH002/src/sys/arch/i386/compile/GENERIC_LAPTOP
cpu0: Intel Pentium (P54C) (586-class), 90.21 MHz
cpu0: features 1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
total memory = 15996 KB
avail memory = 10012 KB
using 225 buffers containing 900 KB of memory
mainbus0 (root)
isa0 at mainbus0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
wd0 at wdc0 channel 0 drive 0: <TOSHIBA MK1926FCV>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 777 MB, 1579 cyl, 16 head, 63 sec, 512 bytes/sect x 1592568 sectors
wd0: drive supports PIO mode 4, DMA mode 2
wdc1 at isa0 port 0x170-0x177 irq 15
atapibus0 at wdc1 channel 0: 2 targets
cd0 at atapibus0 drive 0: <TOSHIBA CD-ROM XM-1202B, 0600949068, 1635> 
type 5 cdr
om removable
cd0: drive supports PIO mode 3
vga0 at isa0 port 0x3b0-0x3df iomem 0xa0000-0xbffff
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
lpt0 at isa0 port 0x378-0x37b irq 7
sb0 at isa0 port 0x220-0x237 irq 5 drq 1: dsp v3.01
audio0 at sb0: half duplex, mmap, independent
midi0 at sb0: SB MIDI UART
opl0 at sb0: model OPL3
midi1 at opl0: SB Yamaha OPL3
pcppi0 at isa0 port 0x61
midi2 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xdffff irq
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xdffff irq
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcic0: controller 1 (Intel 82365SL Revision 1) has no sockets
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
isapnp0: no ISA Plug 'n Play devices found
apm0 at mainbus0: Power Management spec V1.1
biomask ef45 netmask ef45 ttymask ffc7
pcic0: controller 0 detecting irqs with mask 0xdeb8:..9..10..11
pcic0: using irq 9 for socket events
ne0 at pcmcia0 function 0 port 0x300-0x30f port 0x310-0x31f
ne0: DEC DEPCM-BA Ethernet
ne0: Ethernet address 00:00:e8:19:5d:ea
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
pcmcia0: card irq 10
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)