Trying to install NetBSD on an Acer Aspire 1700
	(Huge 7.5kg P4 'laptop'), and not having much luck.
	Running -current from today, tried a standard INSTALL
	kernel, and a custom one with acpi.

	The built in sip interface gives:
	    sip0: device timeout
	when configured by hand or dhclient.

	The cbb is not configured:
	    cbb0: NOT USED because of unconfigured interrupt

	Plugged in a usb 'uax' which was recognised, but attempting
	to run dhclient on it paniced with:
	    uvm_fault(0xccbcc44c, 0, 0, 1) -> 0xe
	    kernel: page fault trap, code=0
	    Stopped in pid 1742.1 (ifconfig) at 0xc01ab5b4: cmpl %edi,0x24(%edx)

	Thoughts definitely welcomed.

NetBSD 1.6ZG (INSTALL) #1: Fri Jan  9 13:16:07 GMT 2004
	abs@tll.i.purplei.com:/files/netbsd/current/sys/arch/i386/compile/obj/INSTALL
total memory = 1533 MB
avail memory = 1491 MB
BIOS32 rev. 0 found at 0xfd840
mainbus0 (root)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel Pentium 4 (686-class), 3054.45 MHz, id 0xf27
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: I-cache 12K uOp cache 8-way, D-cache 8 KB 64b/line 4-way
cpu0: L2 cache 512 KB 64b/line 8-way
cpu0: ITLB 4K/4M: 64 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: calibrating local timer
cpu0: apic clock running at 132 MHz
cpu0: 16 page colors
ioapic0 at mainbus0 apid 1 (I/O APIC)
ioapic0: pa 0xfec00000, version 11, 24 pins
cpu1 at mainbus0: (uniprocessor)
cpu1: Intel Pentium 4 (686-class), 3054.30 MHz, id 0xf27
cpu1: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu1: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu1: I-cache 12K uOp cache 8-way, D-cache 8 KB 64b/line 4-way
cpu1: L2 cache 512 KB 64b/line 8-way
cpu1: ITLB 4K/4M: 64 entries
cpu1: DTLB 4K/4M: 64 entries
acpi0 at mainbus0
acpi0: using Intel ACPI CA subsystem version 20031203
acpi0: X/RSDT: OemId <PTLTD ,  RSDT  ,06040000>, AslId < LTP,00000000>
    ACPI-0441: *** Error: Looking up [Z00D] in namespace, AE_NOT_FOUND
SearchNode 0xc2529180 StartNode 0xc2529180 ReturnNode 0x0
    ACPI-1290: *** Error: [NULL NAME], AE_NOT_FOUND
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpi: activated PNP0C0F
acpi: activated PNP0C0F
acpi: activated PNP0501
acpi_allocate_resources: res=1
acpi: activate failed for PNP0401
PNP0A03 at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0A05 at acpi0 not configured
com3 at acpi0 (PNP0501-1)
com3: io 0x3f8-0x3ff irq 4
com3: ns16550a, working fifo
fdc1 at acpi0 (PNP0700-1)
fdc1: io 0x3f0-0x3f5,0x3f7 irq 6 drq 2
PNP0200 at acpi0 not configured
PNP0000 at acpi0 not configured
PNP0100 at acpi0 not configured
PNP0B00 at acpi0 not configured
PNP0800 at acpi0 not configured
PNP0C02 at acpi0 not configured
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: using exception 16
pckbc1 at acpi0 (PNP0303-1): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (PNP0F13-0): aux port
pckbc2: irq 12
acpiec0 at acpi0 (PNP0C09): ACPI Embedded Controller
acpiec0: io 0x62,0x66
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch
acpibut1 at acpi0 (PNP0C0E): ACPI Sleep Button
acpiacad0 at acpi0 (ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (PNP0C0A-1): ACPI Battery (Control Method)
acpitz0 at acpi0: ACPI Thermal Zone
acpitz0: unable to get polling interval; using default of 30.0s
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Silicon Integrated System SiS 650 Host Bridge (rev. 0x80)
agp0 at pchb0: aperture at 0xe0000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Silicon Integrated System 86C201 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: Nvidia Corporation product 0x031a (rev. 0xa1)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 2 function 0
pcib0: Silicon Integrated System 85C503 or 5597/5598 ISA bridge (rev. 0x14)
Silicon Integrated System product 0x7007 (Firewire serial bus, interface 0x10) at pci0 dev 2 function 3 not configured
siside0 at pci0 dev 2 function 5
siside0: Silicon Integrated System 96X UDMA6650 IDE controller (rev. 0x00)
siside0: bus-master DMA support present
siside0: primary channel configured to compatibility mode
siside0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at siside0 channel 0
siside0: secondary channel configured to compatibility mode
siside0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at siside0 channel 1
Silicon Integrated System product 0x7013 (modem communications, revision 0xa0) at pci0 dev 2 function 6 not configured
auich0 at pci0 dev 2 function 7: SiS 7012 AC-97 Audio
auich0: can't map codec i/o space
ohci0 at pci0 dev 3 function 0: Silicon Integrated System 5597/5598 USB host controller (rev. 0x0f)
ohci0: interrupting at ioapic0 pin 20 (irq 10)
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci0 dev 3 function 1: Silicon Integrated System 5597/5598 USB host controller (rev. 0x0f)
ohci1: interrupting at ioapic0 pin 21 (irq 10)
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ohci2 at pci0 dev 3 function 2: Silicon Integrated System 5597/5598 USB host controller (rev. 0x0f)
ohci2: interrupting at ioapic0 pin 22 (irq 10)
ohci2: OHCI version 1.0, legacy support
usb2 at ohci2: USB revision 1.0
uhub2 at usb2
uhub2: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
Silicon Integrated System 7002 USB 2.0 host controller (USB serial bus, interface 0x20) at pci0 dev 3 function 3 not configured
sip0 at pci0 dev 4 function 0: SiS 900 10/100 Ethernet, rev 0x91
sip0: interrupting at ioapic0 pin 19 (irq 10)
sip0: Ethernet address 00:c0:9f:2f:af:72
acphy0 at sip0 phy 1: AC101L 10/100 media interface, rev. 1
acphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cbb0 at pci0 dev 10 function 0: O2 Micro, Inc. OZ6912/OZ6972 PCI-Cardbus Bridge (rev. 0x00)
cbb0: NOT USED because of unconfigured interrupt
Intersil product 0x3872 (miscellaneous network, revision 0x01) at pci0 dev 11 function 0 not configured
isa0 at pcib0
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
isapnp0: no ISA Plug 'n Play devices found
ioapic0: enabling
fd0 at fdc1 drive 0: density unknown
md0: internal 5000 KB image area
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <MATSHITADVD-RAM UJ-811, , H101> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(siside0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
wd0 at atabus1 drive 0: <ST3120022A>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(siside0:1:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
boot device: fd0
root on md0a dumps on md0b
root file system type: ffs
warning: no /dev/console
sip0: device timeout

--
		David Brownlee - CTO Purple Interactive +44 (0) 20 8740 4888